The fastest way to reset your Samsung soundbar

A factory reset clears all your soundbar's settings and returns it to the state it left the factory. Most Samsung soundbars reset using a physical button on the back or bottom of the unit — hold it for 5 to 10 seconds until you hear a tone or see a light blink. If your model doesn't have a dedicated reset button, you can reset through the Samsung SmartThings app by going to Settings, selecting your soundbar, and choosing Factory Reset.

Reset your soundbar when it stops responding to the remote, won't connect to your TV or phone, or produces sound from only one channel. A reset also clears any saved Bluetooth pairings and Wi-Fi networks, so you'll need to set those up again afterward. Before you reset, write down which devices were connected — you'll reconnect them in the same order.

Key Takeaways

  • The physical reset button is usually on the back or bottom panel of your soundbar and requires a 5 to 10 second hold until you hear a confirmation tone.
  • If your soundbar has no physical button, open the SmartThings app, select your soundbar from the device list, and tap Factory Reset in the Settings menu.
  • A factory reset erases all Bluetooth pairings, Wi-Fi connections, and custom sound settings, so plan to reconnect your devices afterward.
  • After resetting, power the soundbar off and on again, then reconnect it to your TV or phone using the same pairing method you used originally.

Finding the reset button on your soundbar

The reset button location varies by Samsung soundbar model. On most soundbars, it sits on the back panel near the power input or audio cables. On some models, particularly compact or wall-mounted units, the button is on the bottom. Look for a small recessed button labeled "Reset" — it's usually smaller than other buttons and may require a straightened paperclip or pen tip to press.

If you can't find a physical button, check your soundbar's manual or the Samsung support website for your specific model number. You'll find the model number on a sticker on the back or bottom of the unit. Searching "[Your Model Number] reset" will show you exactly where the button is and how long to hold it.

Performing a physical reset with the button

Unplug your soundbar from the power outlet and wait 30 seconds. This clears any temporary settings stored in memory. Plug it back in and wait for the startup sounds to finish — usually 10 to 15 seconds.

Locate the reset button and use a straightened paperclip or ballpoint pen to press and hold it. Keep pressure on the button for 5 to 10 seconds — the exact time depends on your model. You'll hear a beep, see a light flash, or both when the reset begins. Release the button and wait another 10 to 15 seconds for the soundbar to complete the reset cycle.

Do not unplug the soundbar during a reset. If the reset doesn't complete, the soundbar may not turn on properly afterward. If this happens, unplug it for one minute, plug it back in, and try the reset again.

Resetting through the SmartThings app

Open the SmartThings app on your phone or tablet and make sure your soundbar is powered on and connected to the same Wi-Fi network as your phone. Tap the Devices tab at the bottom of the screen, then find your soundbar in the list and tap it.

Tap the Settings icon (usually a gear or three dots in the top right corner). Scroll down and look for Factory Reset, Reset Device, or Restore Defaults — the exact wording changes by model. Tap that option and confirm when the app asks you to verify. The soundbar will restart and return to factory settings within one to two minutes.

If you don't see a reset option in the app, your model may only support physical button reset. Return to the back or bottom of your soundbar and use the button method instead.

What happens after you reset

Your soundbar will restart and play a startup sound. All saved settings are gone — volume levels, sound modes, Bluetooth pairings, and Wi-Fi networks have all been erased. The soundbar is now in the same state as when it first came out of the box.

Power the soundbar off using the remote or the power button, wait 10 seconds, and power it back on. This completes the restart cycle. You can now reconnect it to your TV, phone, or other devices using the same pairing steps you used before the reset.

Reconnecting your soundbar after reset

If your soundbar connects to your TV through HDMI or optical cable, those connections are still in place — no pairing needed. If it connects wirelessly through Bluetooth, press and hold the Bluetooth button on your soundbar's remote until you see a blinking light, then search for the soundbar on your TV or phone's Bluetooth menu and select it.

For Wi-Fi connection, open the SmartThings app, tap Add Device, select Soundbar, and follow the on-screen steps to connect to your network. The app will walk you through entering your Wi-Fi password and naming the soundbar. This usually takes two to three minutes.

After reconnecting, test the sound by playing something on your TV or phone. If only one channel works or the volume is very low, the reset worked correctly — these are normal startup states. Adjust the volume and sound mode using your remote to confirm everything responds properly.

Common problems after reset and how to fix them

Soundbar won't turn on after reset: Unplug it for one full minute, then plug it back in. If it still won't power on, the reset may have been interrupted. Try the physical reset again, making sure not to unplug during the process.

Soundbar connects but produces no sound: Check that the TV or phone is actually playing audio — some devices default to internal speakers after a reset. In your TV's audio settings, select the soundbar as the output device. On phones, open Bluetooth settings and confirm the soundbar is listed as connected.

Only one speaker channel works: This is usually a temporary state after reset. Power the soundbar off and on again. If it persists, check that all cables are fully inserted into the back panel and that the soundbar is positioned correctly relative to your TV.

Soundbar keeps disconnecting from Bluetooth: Forget the soundbar from your phone's Bluetooth menu, power the soundbar off and on, and pair it again from scratch. Make sure your phone and soundbar are within 10 feet of each other during pairing.

Frequently Asked Questions

Will resetting my soundbar erase the firmware?

No. A factory reset only clears settings and pairings. The firmware — the internal software that runs your soundbar — stays in place. Your soundbar will continue to work with the same version of firmware it had before the reset.

Do I need to reset my soundbar before selling it?

Yes. A factory reset removes all your Bluetooth pairings, Wi-Fi networks, and personal settings, so the new owner starts fresh. This also protects your privacy by erasing any connection history. Perform the reset just before handing it over.

How long does a factory reset take?

The reset itself takes 5 to 10 seconds of button holding, then another 10 to 15 seconds for the soundbar to complete the process. Total time from start to finish is usually under one minute. If it takes longer than two minutes, unplug and try again.

Can I reset my soundbar if it won't turn on?

If your soundbar won't power on at all, try unplugging it for one minute, then plugging it back in. If it still won't turn on, a reset won't help — the issue is likely a power supply problem. Contact Samsung support or check the warranty.

Do I lose my sound settings when I reset?

Yes. All custom sound modes, equalizer settings, and volume levels return to factory defaults. You'll need to adjust these again after the reset. Write down your preferred settings before resetting if you want to recreate them afterward.