The quickest way to reset an Onn soundbar
Most Onn soundbars reset to factory settings through a button on the back or bottom of the unit. Locate the small Reset button (often recessed so you need a paperclip or pen to press it), hold it for 10 to 15 seconds while the soundbar is powered on, and release. The lights will flash or the unit will power off and back on—this signals the reset is complete. After reset, the soundbar returns to its original settings: no Bluetooth pairing, no saved inputs, and volume at a default level.
If your Onn soundbar has no physical reset button, you can reset it through the remote control or the Onn Home app (if your model supports it). The method depends on which Onn soundbar model you own, so check the manual that came with your unit or the Onn website for your specific product number.
Key Takeaways
- The reset button on Onn soundbars is usually recessed on the back or bottom and requires a thin object like a paperclip to press.
- Hold the reset button for 10 to 15 seconds while the soundbar is powered on; flashing lights or a power cycle indicates success.
- After a factory reset, all Bluetooth pairings, saved inputs, and custom settings are erased and the soundbar returns to default volume and audio settings.
- If your model has no physical button, check the remote control or the Onn Home app for a reset option in the settings menu.
- Unplug the soundbar for 30 seconds if a button reset does not work; this forces a power cycle that sometimes clears stuck settings.
Finding the reset button on your soundbar
The reset button is small and recessed to prevent accidental presses. On most Onn soundbars, it sits on the back panel near the power input or on the bottom of the unit. Shine a flashlight on the back and bottom to spot a tiny hole labeled "Reset" or marked with a circular indent.
You will need a tool with a thin, pointed tip—a straightened paperclip, a ballpoint pen with the tip retracted, or a SIM card ejector tool all work. Do not use a pencil, which can break inside the hole. Insert the tool straight into the hole and explore steady pressure. You should feel slight resistance as the button depresses.
Step-by-step reset process
Step 1: Power on the soundbar. Make sure the unit is plugged in and turned on. You need power running through it for the reset to register.
Step 2: Locate and press the reset button. Find the recessed reset hole on the back or bottom. Insert your thin tool and press firmly.
Step 3: Hold for 10 to 15 seconds. Keep pressure on the button. Do not release early. After about 10 seconds, watch for the lights on the front to flash, dim, or go dark. Some models power off completely and power back on—this is normal.
Step 4: Release and wait. Once the lights flash or the unit restarts, release the button. Wait 30 seconds for the soundbar to fully boot up. Do not unplug it during this time.
Step 5: Confirm the reset. The soundbar should now be at factory defaults. The display (if it has one) may show a startup screen or default input. Volume will be at the default level, usually around 50 percent.
What happens after a factory reset
A factory reset erases all user settings and pairings. Any Bluetooth devices you connected will no longer be paired—you will need to pair them again from scratch. Any saved HDMI or optical input preferences are cleared. Custom sound modes or equalizer adjustments you made are gone. The soundbar returns to the audio profile it shipped with.
Your soundbar will not lose its firmware (the internal software that runs it). A factory reset only wipes settings, not the operating system. If your soundbar had a software update installed, that update remains after the reset.
Resetting without a physical button
Some newer Onn soundbar models do not have a physical reset button. Instead, they offer a reset option in the remote control menu or the Onn Home app. Check your remote for a Menu or Settings button. Navigate to System Settings or Device Settings, then look for a Reset or Restore Defaults option. Follow the on-screen prompts to confirm.
If your soundbar connects to the Onn Home app on your phone, open the app, select your soundbar, tap the settings icon (usually three dots or a gear), and look for a Factory Reset or Reset Device option. The app will ask you to confirm before erasing settings.
Troubleshooting a reset that does not work
If the lights do not flash and the soundbar does not respond after holding the reset button, try a power cycle instead. Unplug the soundbar from the wall outlet, wait 30 seconds, and plug it back in. This forces the unit to restart and sometimes clears stuck settings or frozen states. It is not the same as a factory reset, but it can solve problems caused by temporary glitches.
If the power cycle does not help and you still cannot reset the soundbar, the reset button itself may be stuck or broken. Try pressing it again with a different tool, or contact Onn customer support with your soundbar model number. They can walk you through model-specific reset steps or arrange a replacement if the button is defective.
When to reset your Onn soundbar
Reset your soundbar if it stops responding to the remote, will not pair with Bluetooth devices, or gets stuck on a single input. A reset also helps if you are selling or giving away the soundbar and want to erase all your personal settings and pairings before handing it over.
Do not reset if you are straightforward trying to change the volume, switch inputs, or adjust sound settings—those are normal controls, not problems that need a reset. A reset should be a last step after you have tried unplugging the unit, re-pairing Bluetooth devices, and checking that cables are seated properly.
Frequently Asked Questions
Will a factory reset erase my soundbar's firmware or software updates?
No. A factory reset only erases user settings like Bluetooth pairings, saved inputs, and volume levels. The internal software and any firmware updates installed on the soundbar remain in place. The soundbar will keep the same operating system version it had before the reset.
How do I re-pair my soundbar to Bluetooth after a reset?
After the reset, put your soundbar into pairing mode. On most Onn models, press and hold the Bluetooth button on the remote or the soundbar itself for 3 to 5 seconds until the Bluetooth light blinks. Then open your phone or device's Bluetooth settings, search for available devices, and select your Onn soundbar from the list. Enter the pairing code if prompted (usually 0000 or 1234).
Can I reset my soundbar if it is not powered on?
No. The soundbar must be powered on for a reset button press to register. If your soundbar will not turn on, plug it in and press the power button on the remote or the unit itself. If it still will not power on, the issue may be with the power supply, not the settings, and a reset will not help.
What if I do not know my soundbar's model number?
Check the back or bottom of the soundbar for a label with the model number printed on it. It usually starts with "Onn" followed by numbers or a product code. You can also check your receipt or the original box. If you cannot find it, contact Onn support with a photo of the soundbar and they can identify the model for you.
Does resetting the soundbar affect the TV it is connected to?
No. Resetting the soundbar only affects the soundbar itself. Your TV settings, apps, and data remain unchanged. If the soundbar is connected to the TV via HDMI or optical cable, you may need to re-select the soundbar as the audio output on the TV after the reset, but the TV itself is not altered.