A factory reset clears all settings and returns your soundbar to its original state

A factory reset wipes your Sonos soundbar back to the condition it left the factory. It removes your Wi-Fi connection, erases any custom settings, and clears the device from the Sonos app. You would reset when the soundbar stops responding to commands, won't connect to your network, or you're preparing to sell or give it away. The process takes about two minutes and requires no tools.

Sonos soundbars reset in one of two ways depending on your model: either by holding a physical button on the device itself, or through the Sonos app on your phone. Both methods produce the same result — a completely blank soundbar that needs to be set up again from the start.

Key Takeaways

  • Hold the reset button on the back or bottom of your soundbar for 5 to 10 seconds until the light flashes or turns off, then wait 30 seconds for the restart to complete.
  • If your soundbar has no physical reset button, open the Sonos app, select your device, go to Settings, and choose the reset or factory reset option.
  • After a reset, your soundbar will not be connected to Wi-Fi or your Sonos system — you will need to set it up again using the Sonos app.
  • A reset does not fix hardware problems like a broken speaker or power issues; if your soundbar still does not work after reset and setup, the device may need repair.

Reset using the physical button on your soundbar

Most Sonos soundbars have a reset button on the back or bottom of the unit. Look for a small recessed button, often labeled "Reset" or marked with a circular symbol. You may need a straightened paperclip or the tip of a ballpoint pen to press it, since the button sits inside a small hole to prevent accidental presses.

Press and hold the reset button for 5 to 10 seconds. The light on the front of the soundbar will flash, dim, or turn off entirely — this is normal. Release the button and wait 30 seconds while the soundbar restarts. Do not unplug it during this time. When the light returns to its normal state (usually a steady glow), the reset is complete.

If you cannot find a reset button on your model, check the Sonos support page for your specific soundbar model number, which is printed on the back or bottom of the unit. Some newer models use the app method instead.

Reset through the Sonos app on your phone

Open the Sonos app on your phone or tablet and make sure your soundbar is still connected and visible in the app. Tap on your soundbar to select it, then look for a Settings or gear icon — this is usually in the top right corner or at the bottom of the screen.

Scroll down through the settings menu until you find an option labeled "Reset," "Factory Reset," or "Restore to Factory Settings." Tap it. The app will ask you to confirm that you want to reset the device. Confirm, and the soundbar will restart. This process takes about 30 seconds. When it finishes, the soundbar will no longer appear in your app.

If you cannot find a reset option in Settings, your soundbar model may only support the physical button method. Exit the app and look for the button on the device itself.

What happens when ready after a reset

Once the reset completes, your soundbar is disconnected from everything. It is no longer paired with your TV, it is not on your Wi-Fi network, and it does not appear in the Sonos app. The device is blank and waiting for setup.

You will see the soundbar as an unconfigured device if you open the Sonos app within a few minutes of the reset. The app will prompt you to set it up again. You can also wait and set it up later — the soundbar will remain in this state until you choose to configure it.

Setting up your soundbar after a reset

Open the Sonos app and tap the plus icon or "Add a Speaker" button. The app will search for nearby Sonos devices. When it finds your soundbar, select it and follow the on-screen steps. You will be asked to connect the soundbar to your Wi-Fi network and name it.

If you had the soundbar paired with your TV before the reset, you will need to pair it again. This usually involves going into your TV's audio settings and selecting the Sonos soundbar as the output device. The exact steps depend on your TV brand and model.

Once setup is complete, your soundbar will work as it did before the reset. Any custom settings — volume levels, audio modes, or room calibration — will be at their factory defaults and can be adjusted again if needed.

When a reset does not solve the problem

If your soundbar still does not respond after a reset and setup, the issue is likely hardware-related rather than software. A reset clears settings and connections, but it cannot fix a broken speaker, a failed power supply, or a damaged circuit board.

Try these steps before assuming the hardware is broken: make sure your soundbar is plugged into a working outlet, check that your Wi-Fi network is broadcasting and other devices can connect to it, and verify that your Sonos app is up to date. If the soundbar still will not turn on or connect after these checks, contact Sonos support with your device model number and a description of what is happening.

Resetting before selling or giving away your soundbar

Always perform a factory reset before handing your soundbar to someone else. A reset removes your Wi-Fi credentials, clears any personal settings, and disconnects the device from your Sonos account. The new owner will receive a blank soundbar they can set up under their own account.

After you reset, wait a few minutes to confirm the soundbar has restarted and is no longer visible in your Sonos app. Then you can safely pass it along. The new owner should set it up using their own Sonos account and Wi-Fi network.

Frequently Asked Questions

Will a reset delete my music library or playlists?

No. A reset only affects the soundbar itself — it clears the device's settings and connection. Your music library, playlists, and account information remain in your Sonos app and on your account. When you set up the soundbar again, everything will be there.

How long does a reset take?

The physical reset button takes about 30 seconds from the moment you release it until the soundbar restarts. Using the app method takes roughly the same time. The entire process — button press or app tap, plus restart — is usually complete within one minute.

Can I reset my soundbar if it is not connected to Wi-Fi?

Yes. The physical reset button works whether the soundbar is connected or not. If you use the app method and the soundbar is offline, you will not be able to access the reset option through the app — use the physical button instead.

What if I reset my soundbar by accident?

There is no undo. Once a reset completes, the soundbar is blank and you will need to set it up again. However, this is not harmful — you can straightforward open the Sonos app and run through setup a second time. Your account and music library are unaffected.

Do I need to unplug my soundbar before resetting?

No. You can reset while the soundbar is powered on and plugged in. Do not unplug it during the reset process, as this can interrupt the restart and potentially cause problems. Let the reset complete naturally, then the soundbar will restart on its own.