Connect the soundbar to power and your TV first
Start by placing your Samsung soundbar on a stable surface directly below or above your TV. Plug the soundbar into a wall outlet using the power cable that came in the box. Then connect the soundbar to your TV using one of three methods: an HDMI cable (the fastest option if your TV has an HDMI ARC or eARC port), an optical digital cable, or a 3.5mm audio cable. HDMI ARC is best because it lets you control the soundbar volume with your TV remote.
If you use HDMI, plug the cable into the HDMI ARC port on your TV—check your TV manual to find which port this is, as it varies by model. On the soundbar, the HDMI port is usually labeled on the back. Turn on both the TV and soundbar. The soundbar should display a light or message showing it has detected the connection.
Key Takeaways
- Connect the soundbar to your TV using HDMI ARC, optical, or a 3.5mm cable before adding the subwoofer.
- Power on the soundbar and subwoofer, then hold the subwoofer's pairing button until the soundbar recognizes it—this usually takes 30 seconds to two minutes.
- read the SmartThings app on your phone to adjust bass, treble, and sound modes without leaving your couch.
- Place the subwoofer on the floor to the side or behind your seating area, away from walls and corners.
- If the subwoofer does not connect, restart both devices and try pairing again from a distance of 10 feet or less.
Pair the subwoofer using the pairing button
Once the soundbar is on and connected to your TV, place the subwoofer in its final location—typically on the floor to the side or behind your seating area. Plug the subwoofer into power. Wait about 30 seconds for it to fully boot up; you will see a light on the back or bottom of the unit.
On the back of the subwoofer, locate the small pairing button (it may be recessed and require a paperclip or pen to press). Press and hold this button for about 10 seconds until the light on the subwoofer begins to blink or changes color. The soundbar should emit a tone or display a message indicating pairing is in progress. Within two minutes, the subwoofer light should stop blinking and stay solid, meaning the pair is complete.
If pairing fails, power off both the soundbar and subwoofer, wait 10 seconds, then power them back on and try again. Make sure they are within 10 feet of each other during pairing.
read SmartThings to fine-tune sound settings
The SmartThings app (available on iOS and Android) lets you adjust bass, treble, and sound modes without using a remote. Open the app on your phone, sign in with your Samsung account or create one, and select your soundbar from the device list. The app will show you all available sound modes—such as Standard, Surround, or Movie—and let you customize the bass and treble levels.
You can also use the SmartThings app to update the soundbar's firmware, which adds new features and fixes bugs. Check for updates in the app settings and install them while the soundbar is plugged in and connected to Wi-Fi. Firmware updates usually take five to ten minutes.
Position the subwoofer away from corners and walls
The location of your subwoofer affects how the bass sounds in your room. Avoid placing it in a corner or flush against a wall, because corners and walls amplify bass and can make it sound boomy or uneven. Instead, place the subwoofer on the floor to the side of your seating area or behind it, at least one foot away from any wall.
If you have a small room and corner placement is unavoidable, use the SmartThings app to lower the bass level slightly until the sound feels balanced. Some Samsung subwoofers also have a phase control dial on the back (usually marked 0 or 180 degrees); if bass sounds weak, try switching this dial to see which setting sounds better in your room.
Troubleshoot if the subwoofer will not connect
If the subwoofer light blinks but never turns solid, or if you hear no bass from the subwoofer, try these steps in order. First, power off the soundbar and subwoofer completely, wait 30 seconds, and power them back on. Move the subwoofer closer to the soundbar—within 10 feet—and try pairing again by holding the subwoofer's pairing button.
Second, check that both devices are on the same Wi-Fi network if your soundbar model requires it. Open SmartThings, go to settings, and confirm the soundbar is connected to your home Wi-Fi. Third, if the subwoofer was previously paired to a different soundbar, it may need to be factory reset. Consult your subwoofer manual for the reset procedure, which often involves holding a button for 10 to 15 seconds.
If none of these steps work, the subwoofer may have a hardware fault. Contact Samsung support with your model number and purchase date; they can advise whether repair or replacement is the next step.
Adjust sound modes for different content
Samsung soundbars come with preset sound modes designed for different types of content. Standard mode is balanced for everyday TV watching. Surround mode adds width and depth, making it feel like sound is coming from around you—good for movies and sports. Movie mode emphasizes dialogue and cinematic effects. Music mode is tuned for songs and concerts.
You can switch between modes using your soundbar remote, your TV remote (if connected via HDMI ARC), or the SmartThings app. Try each mode with content you know well—a favorite movie or show—and pick the one that sounds best to you. There is no single "correct" mode; it depends on your room and your ears.
Connect to Wi-Fi for app control and updates
To use SmartThings and receive firmware updates, your soundbar needs to connect to your home Wi-Fi. On the soundbar remote, press the Menu or Settings button, navigate to Network or Wi-Fi, and select your home network from the list. Enter your Wi-Fi password when prompted. The soundbar will display a confirmation message once connected.
If your soundbar does not find your Wi-Fi network, make sure you are within 30 feet of your router and that the router is powered on. If you have a 5 GHz and 2.4 GHz network with the same name, try connecting to the 2.4 GHz version first—some Samsung soundbars work better on 2.4 GHz. Once connected, open SmartThings and your soundbar should appear in the device list within a minute.
Frequently Asked Questions
Do I need a soundbar remote if I have SmartThings?
SmartThings works well for volume and sound mode changes, but the physical remote is faster for quick adjustments and does not require your phone to be nearby. Most Samsung soundbars come with a remote, and it is worth keeping even if you use the app most of the time.
Can I use a Samsung subwoofer with a different brand soundbar?
No. Samsung subwoofers are designed to pair only with Samsung soundbars. If you have a different brand soundbar, you will need a subwoofer made by that same brand or a universal subwoofer with a 3.5mm or RCA connection.
What if my TV does not have an HDMI ARC port?
Use an optical digital cable instead. Optical cables carry high-quality audio and are widely available. Plug one end into the optical audio output on your TV and the other into the optical input on the soundbar. You will lose the ability to control soundbar volume with your TV remote, but sound quality will be nearly identical.
How far can the subwoofer be from the soundbar?
During pairing, keep them within 10 feet. Once paired, the subwoofer can be up to 30 feet away and still maintain a wireless connection, though walls and metal objects can reduce this range. For best results, keep the subwoofer in the same room as the soundbar.
Why does the bass sound weak even though the subwoofer is on?
Check that the subwoofer volume dial on the back is not turned all the way down. Also try switching the phase control dial (if your model has one) from 0 to 180 degrees to see if bass sounds stronger. If bass is still weak, use SmartThings to increase the bass level in the sound settings.