The basic connection method depends on your soundbar model
Most Samsung soundbars connect to a subwoofer wirelessly through a pairing process that takes a few minutes. The subwoofer and soundbar communicate on a private frequency, so you do not need to open your router settings or enter a password. The exact steps vary slightly between models, but the core process is the same: power both devices, hold a button on the subwoofer until it searches for the soundbar, and wait for a light to confirm they have found each other.
Some older Samsung soundbars use a wired connection instead, with a cable that runs from the soundbar to the subwoofer. Check your soundbar's manual or the back panel to see which type yours is. If you see a subwoofer port on the back of the soundbar, you have a wired model. If there is no port, your soundbar pairs wirelessly.
The pairing process only needs to happen once. After that, the subwoofer will reconnect automatically whenever both devices power on, the same way your phone reconnects to a familiar Wi-Fi network.
Key Takeaways
- Most Samsung soundbars pair wirelessly with their subwoofer by holding the pairing button on the subwoofer until a light blinks, then waiting for the soundbar to find it.
- Older models may use a wired connection with a cable running from the soundbar to the subwoofer port on the back panel.
- The pairing process happens only once; after that, the subwoofer reconnects automatically when powered on.
- If pairing fails, power off both devices, wait 30 seconds, and try again, as interference or a stale connection is usually the cause.
- The subwoofer should be placed within 20 feet of the soundbar and away from metal objects or other wireless devices for the strongest connection.
Wireless pairing: the step-by-step process
Start by placing the subwoofer in the room where you want it to stay. It does not need to be directly next to the soundbar, but it should be within 20 feet and in the same room or an adjacent one. Keep it away from metal shelving, microwave ovens, and other wireless speakers, which can interfere with the signal.
Power on the soundbar first, then power on the subwoofer. Wait about 10 seconds for both to fully boot. On the subwoofer, locate the pairing button. On most Samsung models, this is a small button on the back or bottom of the unit, sometimes labeled "Pairing" or "ID Set." Press and hold this button for about 5 to 7 seconds until the LED light on the subwoofer begins to blink. A blinking light means the subwoofer is now searching for the soundbar.
The soundbar should detect the subwoofer within 30 seconds. When they connect, the LED on the subwoofer will stop blinking and stay solid, usually turning blue or white. Some soundbars also display a message on their front panel or send a notification to your phone app confirming the connection. If the light goes out or turns red, the pairing failed and you should try again.
Wired connection: for older Samsung soundbar models
If your soundbar has a subwoofer port on the back panel, use a standard subwoofer cable to connect the two devices. The cable has RCA connectors on both ends (round plugs, usually red and white or black). Plug one end into the subwoofer output port on the soundbar and the other end into the input port on the subwoofer.
Make sure both devices are powered off before connecting the cable. After the cable is seated firmly in both ports, power on the soundbar first, then the subwoofer. The subwoofer should power on and begin working when ready. There is no pairing button to press or light to wait for with a wired connection.
Wired subwoofers are less common in newer Samsung soundbar models, but they are still found in budget and mid-range bars from 2018 and earlier. If you are unsure whether your model is wired or wireless, check the product manual or search your soundbar model number on Samsung's support website.
Troubleshooting a failed pairing
If the subwoofer light does not blink when you press the pairing button, or if it blinks but never connects to the soundbar, start by powering off both devices completely. Unplug the subwoofer from the wall outlet and wait 30 seconds. Plug it back in and power it on, then repeat the pairing process. A stale connection or a temporary software glitch is often the cause, and a full power cycle usually fixes it.
If pairing still fails, move the subwoofer closer to the soundbar, at least within 10 feet, and try again. Walls, metal objects, and other wireless devices like cordless phones or baby monitors can weaken the signal. Once pairing succeeds, you can move the subwoofer back to its preferred location.
Check that your soundbar firmware is up to date. Some Samsung soundbars receive firmware updates through the SmartThings app or through a USB connection. An outdated soundbar may have trouble pairing with the subwoofer. Visit Samsung's support site, enter your soundbar model number, and look for any available updates.
Adjusting subwoofer volume and settings
After pairing, you can control the subwoofer volume through the soundbar's remote or the SmartThings app. On the remote, look for a button labeled "Subwoofer" or a menu option for sound settings. The app usually has a dedicated subwoofer volume slider under audio settings. Adjust this to your preference—higher values add more bass, while lower values reduce it.
Some Samsung soundbars also let you adjust the subwoofer's crossover frequency, which controls which sounds the subwoofer handles versus the soundbar's main speakers. The default setting works well for most rooms, but if you find the bass is too boomy or too quiet, experimenting with this setting can help. The SmartThings app is usually the easiest place to make these changes.
If you cannot find subwoofer controls in your soundbar's menu, your model may not support volume adjustment for the subwoofer separately. In that case, the subwoofer volume is fixed by the manufacturer, and you control overall bass only through the soundbar's bass or equalizer settings.
Placement and room setup for best performance
The subwoofer works best when it is not crammed into a corner or hidden behind furniture. Bass frequencies travel in all directions, so placing the subwoofer in an open area of the room, even off to the side, usually sounds better than tucking it away. Avoid placing it directly against a wall, as this can cause bass to build up and sound muddy.
The subwoofer does not have to be in the same line of sight as the soundbar, but it should be in the same room or a directly adjacent one. Wireless signals can pass through drywall and light furniture, but thick walls or multiple rooms between the soundbar and subwoofer may cause connection drops. If you are placing the subwoofer in a different room, test the connection after setup to make sure it stays stable.
Keep the subwoofer away from heat sources like radiators or vents, and avoid placing it on a surface that vibrates easily, such as a thin shelf. A solid floor or sturdy stand is ideal. This helps the subwoofer perform as designed and prevents vibrations from traveling through your furniture.
When to reset the pairing and start over
If you are moving the subwoofer to a different soundbar or replacing your soundbar, you may need to reset the pairing. On most Samsung subwoofers, holding the pairing button for 10 to 15 seconds (longer than the normal 5 to 7 seconds) will clear the old pairing and put the subwoofer back into search mode. Check your subwoofer manual for the exact reset time, as it varies by model.
After resetting, follow the standard pairing steps again. The subwoofer will search for a new soundbar and connect to the first one it finds. If you have multiple Samsung soundbars in your home, make sure only one is powered on during pairing to avoid confusion.
Frequently Asked Questions
Can I use a Samsung subwoofer with a non-Samsung soundbar?
Most Samsung subwoofers are designed to pair only with Samsung soundbars. They use a proprietary wireless protocol that other brands do not support. If you have a Samsung subwoofer and a different brand of soundbar, you will likely need to use a wired connection with an RCA cable instead, if the soundbar has a subwoofer output port.
Why does my subwoofer keep disconnecting from the soundbar?
Interference from other wireless devices, a weak battery in the remote, or a distance greater than 20 feet between the soundbar and subwoofer are common causes. Try moving the subwoofer closer, turning off nearby wireless devices, and powering both the soundbar and subwoofer off and back on. If disconnections continue, the subwoofer or soundbar may need a firmware update or service.
Do I need the SmartThings app to pair my subwoofer?
No. The SmartThings app is optional and is used only for adjusting settings after pairing is complete. Pairing itself happens through the physical pairing button on the subwoofer and requires no app or internet connection.
What if my soundbar and subwoofer are different ages or models?
Samsung subwoofers are generally backward and forward compatible within a few years of release. An older subwoofer can usually pair with a newer soundbar and vice versa. However, very old subwoofers (2015 or earlier) may not pair with newer soundbars. Check your manual or contact Samsung support if you are unsure whether your specific models are compatible.
Can I pair two subwoofers to one Samsung soundbar?
Most Samsung soundbars support only one subwoofer at a time. If you try to pair a second subwoofer, it will replace the first one. Some high-end Samsung soundbar systems sold as bundles include two subwoofers, but these are rare and require a specific soundbar model designed for dual subwoofers.