Power on your Bose soundbar using the physical power button on the unit itself

Most Bose soundbars have a power button built into the back or side of the unit. This button works independently of the remote, so you can turn the soundbar on and off without it. The button is usually small and recessed slightly into the casing to prevent accidental presses.

To find it, look along the back panel or the right side of your soundbar. On many models, the power button is near the input ports (HDMI, optical, or USB connections). Press it firmly—you should hear a startup tone or see a light indicator turn on. The soundbar will take a few seconds to boot up, just like any other electronic device.

If you cannot locate a physical button, check your soundbar's manual or the Bose website for your specific model number. The model number is usually printed on the back or bottom of the unit. Different Bose soundbar lines place the power button in different locations, so the manual will show you exactly where yours is.

Key Takeaways

  • Every Bose soundbar has a physical power button on the back or side that turns it on without a remote.
  • The button is often small and recessed, located near the input ports on the back of the unit.
  • If you cannot find the button, look up your model number on the back of the soundbar and check the Bose support website for the manual.
  • Once powered on, you can control volume and input selection using your TV remote if your soundbar supports HDMI-CEC, or by purchasing a replacement Bose remote.

Locate the power button on your specific Bose model

Bose makes several soundbar lines, and the power button location varies slightly between them. On the Bose Smart Soundbar 600 and 700, the power button is on the right side of the unit when you are facing it. On the Bose Solo and Solo 5, it is on the back panel near the center. The Bose Soundbar 500 has its power button on the back left side.

If you own an older Bose soundbar model, the button may be in a slightly different spot. The easiest way to confirm is to search "Bose [your model number] power button" online, or visit the Bose support page and read the user manual as a PDF. The manual includes a diagram showing the exact location and what each button does.

Use your TV remote to power on the soundbar if HDMI-CEC is enabled

If your Bose soundbar is connected to your TV via HDMI and HDMI-CEC is turned on, you may be able to power on the soundbar using your TV remote. HDMI-CEC is a feature that lets devices communicate with each other over the HDMI cable. When you turn on your TV, the soundbar may turn on automatically.

This does not work on all models or all TV brands, and it depends on whether both your TV and soundbar have HDMI-CEC enabled. To check if your soundbar supports this, look in the settings menu on your TV or in the Bose manual. If HDMI-CEC is available, you can usually turn it on in the soundbar's settings through your TV's menu system.

Keep in mind that HDMI-CEC is not a may provide way to power on the soundbar—it is a convenience feature that works when both devices are set up correctly. The physical power button is always the most reliable method.

Control volume and inputs after powering on without a remote

Once your soundbar is on, you have a few options for controlling it without the original remote. If your soundbar is connected to your TV via HDMI-CEC, your TV remote may control the volume and input selection. Test this by pressing the volume buttons on your TV remote while the soundbar is playing sound.

Some Bose soundbars also have touch controls on the top of the unit. You can tap or swipe the top panel to adjust volume or skip tracks if you are playing music from a connected device. Check your manual to see if your model has this feature.

If neither of these options works for your setup, you can purchase a replacement Bose remote from the Bose website or from retailers like Amazon or Best Buy. Bose remotes are model-specific, so make sure you order the correct one for your soundbar. The remote will pair automatically when you press any button on it.

Pair a replacement Bose remote if you have lost yours

If you need a new remote, order one from Bose directly or from an authorized retailer. Have your soundbar model number ready when you order. Once the remote arrives, turn on your soundbar using the physical power button, then press any button on the new remote. Most Bose remotes pair automatically without any additional setup steps.

If the remote does not pair on the first try, check the batteries in the remote and make sure they are installed correctly. Replace them if they are old or low. Then press a button on the remote again while pointing it at the soundbar from a distance of about 10 feet. The soundbar should respond within a few seconds.

Troubleshoot if the power button does not respond

If you press the physical power button and nothing happens, first check that the soundbar is plugged in and the outlet is working. Plug a lamp or phone charger into the same outlet to confirm the outlet has power. If the outlet works but the soundbar does not turn on, the power cable may be damaged or the soundbar may need a reset.

To reset your Bose soundbar, unplug it from the wall outlet and wait 30 seconds. Then plug it back in and press the power button. This clears the soundbar's memory and often fixes minor issues. If the soundbar still does not turn on after a reset, the unit may have a hardware problem and you should contact Bose support or take it to a service center.

Frequently Asked Questions

Where exactly is the power button on a Bose soundbar?

The power button is on the back or side of the soundbar, usually near the input ports. On newer models like the Smart Soundbar 600 and 700, it is on the right side. On older models like the Solo 5, it is on the back. Check your manual or the Bose website for your specific model to see a diagram.

Can I turn on my Bose soundbar with my TV remote?

Only if your soundbar is connected via HDMI and HDMI-CEC is enabled on both devices. This feature is not available on all models or all TV brands. The physical power button on the soundbar itself is the most reliable way to turn it on.

What if I cannot find the power button?

Look up your Bose soundbar model number on the back or bottom of the unit, then visit the Bose support website and read the user manual. The manual includes a labeled diagram showing exactly where the power button is located on your model.

Do I need a remote to use my Bose soundbar?

No. You can turn the soundbar on with the physical power button and control volume using your TV remote if HDMI-CEC is enabled, or through touch controls on the top of the unit if your model has them. A remote is convenient but not required.

How do I reset my Bose soundbar if it will not turn on?

Unplug the soundbar from the wall outlet, wait 30 seconds, and plug it back in. Then press the power button. If it still does not turn on, check that the outlet has power by plugging in another device. If the outlet works but the soundbar does not, contact Bose support.