The Basic Power-On Steps

Most Samsung soundbars power on using the remote control that came in the box. Point the remote at the soundbar and press the power button — usually marked with a circle or power symbol — and you should see a light turn on at the front of the unit. The soundbar will emit a startup sound, and the display (if it has one) will show the current input or volume level.

If you cannot find the remote, you can also press the power button directly on the soundbar itself. This button is typically located on the right side or back of the unit, though the exact location varies by model. Press and hold it for one to two seconds until the light comes on.

Once powered on, the soundbar enters standby mode if no audio signal is detected. This is normal — it will automatically set up sound output when your TV or connected device sends audio to it.

Key Takeaways

  • Use the remote control's power button to turn on your Samsung soundbar, or press the physical power button on the unit itself if the remote is unavailable.
  • A light on the front of the soundbar and a startup sound confirm that power-on was successful.
  • The soundbar may enter standby mode until it receives an audio signal from your TV or other connected device.
  • If the soundbar does not respond to the remote, check that the batteries are installed correctly and facing the right direction.
  • Some Samsung soundbars support voice commands through Bixby or other assistants if you have set up that feature in the SmartThings app.

Using the Remote Control

The Samsung soundbar remote has a dedicated power button at the top. This is the fastest way to turn the unit on and off. Make sure you are pointing the remote directly at the soundbar's front panel, where the infrared receiver is located, from a distance of no more than 20 feet.

If the remote does not work, open the battery compartment on the back and check that two AA batteries are installed with the positive and negative ends facing the correct direction — usually marked with a diagram inside the compartment. Replace the batteries if they are old or corroded.

Powering On Without a Remote

If your remote is lost or broken, locate the physical power button on your soundbar. On most Samsung models, this button is on the right side of the unit or recessed into the back panel. You may need to feel along the edges to find it, as some models have buttons that blend into the design.

Press and hold the button for one to two seconds. You will hear a beep or see a light indicator turn on. This method works the same way as the remote and does not require any setup or pairing.

Connecting Power and Checking the Cable

Before you can turn on your Samsung soundbar, it must be plugged into a working electrical outlet. Check that the power cable is fully inserted into both the soundbar and the wall outlet. If the soundbar still does not respond to the power button, try plugging it into a different outlet to rule out a problem with that specific socket.

Some Samsung soundbars have a power switch on the back panel in addition to the power button. If your model has one, make sure it is in the ON position before pressing the power button.

Setting Up Voice Control (Optional)

If you want to turn on your Samsung soundbar using voice commands, you can set this up through the SmartThings app on your phone. read the app, create a Samsung account, and add your soundbar to the app by following the on-screen prompts. Once connected, you can use Bixby voice commands on compatible Samsung devices to power the soundbar on and off without touching the remote.

Voice control requires that your soundbar is connected to your home Wi-Fi network. The setup process takes a few minutes and is optional — you can always use the remote or physical button instead.

Troubleshooting When the Soundbar Won't Turn On

If your soundbar does not respond to the power button or remote, first check that it is plugged in and that the outlet has power. Plug a lamp or phone charger into the same outlet to confirm the outlet works. If the outlet is fine but the soundbar still does not respond, the power cable may be damaged or the unit may have an internal fault.

If the remote does not work but the physical power button does, the remote batteries may be dead or the remote itself may be broken. Replace the batteries first, and if that does not help, you can order a replacement remote from Samsung or use the physical button going forward.

If neither the remote nor the physical button works, and the soundbar is plugged into a working outlet, the soundbar may need service. Contact Samsung support with your model number, which is usually printed on the back of the unit or in the user manual.

Understanding Standby Mode and Auto-Off

Samsung soundbars enter a low-power standby mode when they are on but not receiving audio. This is normal and does not mean the soundbar is off. The standby light will remain on, and the unit will wake up automatically when your TV sends audio to it.

Some models also have an auto-off feature that powers down the soundbar after 15 or 30 minutes of no audio input. Check your user manual to see if your model has this feature and how to adjust it if needed. You can usually disable auto-off in the soundbar's settings menu, accessed through the remote.

Frequently Asked Questions

Why does my Samsung soundbar have a light on but no sound?

The soundbar is powered on but may not be receiving an audio signal from your TV. Check that your TV is connected to the soundbar via HDMI, optical cable, or Bluetooth, and that the TV's audio output is set to send sound to the soundbar rather than the TV's built-in speakers. Consult your TV's manual for how to change the audio output setting.

Can I turn on my Samsung soundbar from my phone?

Yes, if you set up the soundbar in the SmartThings app and connect it to Wi-Fi. Once connected, you can use the app to power it on and off remotely, adjust volume, and change input sources. This requires a Samsung account and a home Wi-Fi network.

What does it mean if the soundbar light blinks instead of staying on?

A blinking light usually means the soundbar is in pairing mode or waiting for a connection. Check your user manual for what the specific light pattern means on your model. If the soundbar is blinking and you did not intend to pair it, press the power button again to return it to normal operation.

Do I need to turn on my soundbar every time I use it?

Yes, you will need to press the power button each time you want to use it, unless you set up voice control through the SmartThings app. The soundbar does not stay on permanently — it powers down when you turn it off or when the auto-off timer expires.

Is it safe to leave my Samsung soundbar on all the time?

It is safe to leave the soundbar powered on, but it will use electricity and may reduce the lifespan of internal components over time. Most people turn the soundbar off when not in use to save energy. If you prefer not to turn it on manually each time, use the SmartThings app to set up voice control or scheduling.