How to Add MyQ to HomeKit and Control Your Garage Door from Apple Devices

Adding MyQ to HomeKit requires a HomeKit hub and the Home app on an Apple device

MyQ doors and openers can be added to HomeKit through the Home app on your iPhone, iPad, or Mac. The process takes about five minutes and involves scanning a HomeKit code or entering an 8-digit setup code. Once added, you can control your garage door, gate, or door opener from any Apple device signed into the same iCloud account, and you can set automations like opening the door when you arrive home.

Before you start, make sure you have a HomeKit hub — an Apple TV 4K, HomePod mini, or iPad set to stay home — connected to your Wi-Fi network. Your MyQ device must also be connected to Wi-Fi and already set up in the MyQ app. HomeKit cannot control MyQ devices over Bluetooth alone; the hub relays commands over your home network.

Key Takeaways

You need a HomeKit hub (Apple TV 4K, HomePod mini, or iPad) on the same Wi-Fi network as your MyQ device before HomeKit can control it.
Open the Home app, tap the plus icon, select "Add Accessory," and scan the 8-digit HomeKit code on your MyQ device or its packaging.
MyQ devices appear in HomeKit as garage door openers or door locks depending on the model, and you can name them and assign them to rooms.
Once added, you can open or close the door from the Home app, Siri, or Control Center on any Apple device using the same iCloud account.
If HomeKit shows "No Response," restart your MyQ device and check that your HomeKit hub is powered on and connected to Wi-Fi.

Check your HomeKit hub status before adding MyQ

HomeKit requires a hub to communicate with accessories when you are away from home or to use automations. Open the Home app, tap the house icon in the top left, then scroll down to "Hubs and Bridges." You should see a hub listed with a green dot next to its name, meaning it is connected and ready. If you see a gray dot or no hub at all, HomeKit cannot control your MyQ device remotely.

If you do not have a hub, you have three options: buy an Apple TV 4K (the most reliable choice), a HomePod mini, or set up an iPad to stay plugged in at home. The iPad must be set to stay home by opening the Home app, tapping the house icon, going to "Home Settings," and selecting the iPad under "Hubs and Bridges." Once your hub is active, move forward with adding MyQ.

Locate the HomeKit code on your MyQ device

Every MyQ device has an 8-digit HomeKit setup code printed on a label. For most MyQ garage door openers, this code is on a sticker inside the device or on the back of the unit. For MyQ Smart Garage Door Openers, check the bottom of the device or the original packaging. Some newer MyQ devices also display a HomeKit code as a scannable square (QR code) on the label.

Write down the 8-digit code or take a photo of the label. If you cannot find the code on your device, check the original box or manual. If you have lost the packaging, you can contact MyQ support to request the code, though this may take a few days. Do not proceed to HomeKit until you have the code in front of you.

Add MyQ to HomeKit using the Home app

Open the Home app on your iPhone, iPad, or Mac. Tap the plus icon in the top right corner and select "Add Accessory." Hold your device's camera over the HomeKit code on your MyQ device or its label. The Home app will scan the code automatically and show your MyQ device name.

If the camera does not scan the code, tap "Don't Have a Code or Can't Scan?" and enter the 8-digit code manually. The app will then ask you to name the device (for example, "Garage Door" or "Front Gate"), choose a room (like "Garage"), and select which home it belongs to if you have multiple homes set up. Tap "Add" to finish. HomeKit will connect to your MyQ device over Wi-Fi and should show it as available within 30 seconds.

Control your MyQ device from HomeKit

Once added, your MyQ device appears in the Home app as a garage door opener or door lock, depending on the model. Tap the device tile to open or close the door. You can also add it to Control Center on your iPhone or iPad by opening Settings, tapping Control Center, and adding the Home app. Then swipe down from the top right of your screen to see a quick toggle for your MyQ device.

You can also control MyQ through Siri by saying "Hey Siri, open the garage door" or "Hey Siri, close the garage." For security, HomeKit requires you to confirm the action on your device the first time you use a voice command. After that, Siri will execute the command without asking. If you share your home with family members through HomeKit, they can control the door from their own Apple devices using the same iCloud family group.

Set up automations to open or close the door automatically

HomeKit automations let your MyQ door open or close based on time, location, or other triggers. Open the Home app, tap the Automation tab at the bottom, and tap the plus icon. Choose "Create New Automation," then select "When a person arrives" or "When a person leaves" to trigger the door based on location, or "Time of Day" to open or close at a set time each day.

Select your MyQ device and choose whether to open or close it. For example, you can set the door to open automatically when you arrive home after 6 p.m., or close it at 10 p.m. every night. HomeKit will ask if you want a notification when the automation runs. Automations require your HomeKit hub to be active, so double-check that your hub is connected before relying on them.

Troubleshoot MyQ devices showing "No Response" in HomeKit

If your MyQ device shows "No Response" in the Home app, it means HomeKit cannot reach it over Wi-Fi. First, restart your MyQ device by unplugging it for 30 seconds, then plugging it back in. Wait two minutes for it to reconnect to Wi-Fi. Then open the Home app and check if the status changes to "Connected."

If the device still shows "No Response," check that your HomeKit hub is powered on and connected to the same Wi-Fi network as your MyQ device. Open the Home app, tap the house icon, and look at "Hubs and Bridges" to confirm the hub has a green dot. If the hub is offline, restart it by unplugging it for 30 seconds. You can also restart your Wi-Fi router by unplugging it for one minute. If the problem persists after these steps, remove the device from HomeKit by tapping and holding its tile, selecting "Settings," and tapping "Remove Accessory," then add it again from scratch.

Frequently Asked Questions

Can I control MyQ from HomeKit if I am away from home?

Yes, but only if you have a HomeKit hub set up. The hub relays your commands to the MyQ device over your home Wi-Fi network. Without a hub, HomeKit can only control accessories when you are on the same Wi-Fi network as your home. A HomePod mini or Apple TV 4K is the easiest way to enable remote control.

What if my MyQ device does not have a HomeKit code?

Older MyQ devices may not support HomeKit. Check your device model on the MyQ website or contact MyQ support to confirm HomeKit compatibility. If your device is compatible but the code is missing, MyQ support can provide it, though you may need to verify ownership with a photo of your device or receipt.

Can multiple people control the same MyQ door through HomeKit?

Yes. Invite family members to your HomeKit home through the Home app by tapping the house icon, going to "Invite," and sending an invite. They can then control the MyQ device from their own Apple devices. You can set different permission levels so some people can only view the door status while others can open and close it.

Do I need the MyQ app if I add it to HomeKit?

No, but you can use both. HomeKit gives you control through Apple devices and Siri, while the MyQ app offers additional features like scheduling and notifications specific to MyQ. Most people use HomeKit for daily control and keep the MyQ app for backup or advanced settings.

Why does HomeKit ask me to confirm before closing the garage door?

HomeKit requires confirmation for actions that could affect security or safety, like closing a garage door. This prevents accidental commands from Siri or automations. You can disable this by opening the Home app, tapping and holding the MyQ device, selecting "Settings," and turning off "Require Authentication," though this is not recommended for security reasons.

This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.