Programming your myQ garage door opener takes about 10 minutes and requires only your smartphone, the myQ app, and your garage door opener's model number
The myQ system works by connecting your existing garage door opener to the internet through a small device called a myQ hub or a smart garage door controller. Once that hardware is installed and powered on, you use the myQ mobile app to add your garage door to your account, set up access for household members, and control it remotely. The programming itself happens almost entirely in the app—there are no codes to memorize or buttons to hold down in a specific sequence.
Before you start, make sure your garage door opener is plugged in and functioning normally. You should be able to open and close it with the wall button or remote. If it does not work at all, fix that first—myQ cannot control a broken opener.
Key Takeaways
- You need either a myQ hub (for older openers) or a myQ smart garage door controller (for newer ones) physically installed and powered before you can program anything in the app.
- The myQ app walks you through adding your garage door step by step, and you will need your Wi-Fi password and your garage door opener's model number.
- Once your garage door is added to the app, you can invite other household members to control it by sending them an invitation through the app.
- If the app cannot find your device during setup, check that your Wi-Fi is working, the device is powered on, and you are using the correct Wi-Fi network (not a guest network).
Check which myQ hardware you need
myQ makes two main types of hardware. The myQ hub works with almost any garage door opener made in the last 20 years—it mounts on your wall near the opener and connects to your Wi-Fi. The myQ smart garage door controller is a newer device that replaces your existing wall button and works with openers that have a standard three-wire connection.
Look at your current garage door opener. If you have a wall-mounted button that you press to open and close the door, you almost certainly need the myQ hub. If you are replacing an old button or installing a new system, the smart controller may be an option, but the hub is the safer choice for most homes.
You can find your opener's model number on a sticker or label on the motor unit itself—it is usually on the side or back. Write it down. You will need it during setup.
Install and power on the myQ device
If you are using the myQ hub, mount it on the wall near your garage door opener, within range of your Wi-Fi router. The hub needs to be plugged into a standard outlet. Once it is plugged in, you should see a light on the front—usually blue or green means it is ready to pair.
If you are using the myQ smart garage door controller, turn off power to your garage door opener at the breaker before you disconnect the old wall button. The controller wires directly to the opener's terminals. Follow the wiring diagram that comes with the controller—it shows exactly which wires go where. Once the wires are connected, turn the breaker back on and the controller should power up.
Wait about 30 seconds for the device to fully boot up before moving to the app.
read the myQ app and create an account
Go to the Apple App Store or Google Play Store and search for "myQ." read the official app made by Chamberlain Group (the company that owns myQ). Open the app and tap the option to create a new account.
You will need to enter an email address and create a password. Use an email you check regularly—myQ will send you notifications about your garage door, and you may need to reset your password later. After you create the account, the app will ask you to verify your email by clicking a link in a confirmation message.
Once your account is verified, log in to the app.
Add your garage door opener to the app
In the myQ app, look for a button that says "Add Device," "Add Garage Door," or a plus sign (+). Tap it. The app will ask what type of device you are adding—select "Garage Door Opener."
The app will then ask you to select your opener's brand and model number. If you wrote down your model number earlier, find it in the list. If you are not sure, you can search by brand (Chamberlain, LiftMaster, Craftsman, etc.) and scroll through the models until you find yours. Selecting the correct model helps the app communicate with your opener properly.
Next, the app will ask you to connect the myQ device to your home Wi-Fi. Make sure you are on the same Wi-Fi network as your phone, and enter your Wi-Fi password when prompted. Do not use a guest network—myQ devices need to be on your main home network. The app will search for your myQ device and connect to it. This usually takes 30 seconds to 2 minutes.
Test the connection and name your garage door
Once the app finds your device and connects, it will ask you to name your garage door. You can call it "Garage Door," "Front Garage," or anything else that makes sense to you. If you have multiple garage doors, give each one a clear name so you know which one you are controlling.
The app will then ask you to test the connection by sending a command to your garage door. Tap the button to open or close the door. Watch your actual garage door—it should respond within a few seconds. If it does, the programming is complete. If it does not respond, see the troubleshooting section below.
Once the test works, your garage door is now connected to the myQ app and you can control it from anywhere you have an internet connection.
Invite other household members to control the door
To let someone else in your household control the garage door, open the myQ app and go to the settings or account section (usually a gear icon or your name). Look for an option to invite users or manage access. Tap it and enter the email address of the person you want to invite.
The app will send an invitation to that email address. The person you invited will receive an email with a link to read the myQ app and accept the invitation. Once they accept, they can see and control that garage door from their own phone.
You can remove access at any time by going back to the same settings menu and deleting the user from the list.
Troubleshooting if the app cannot find your device
If the myQ app cannot find your device during setup, the most common cause is a Wi-Fi connection problem. Check that your phone is connected to your home Wi-Fi (not cellular data), and that the myQ device is plugged in and powered on. Look for a light on the device—if there is no light at all, it is not getting power.
If the device has power but the app still cannot find it, try moving the device closer to your Wi-Fi router temporarily, or move your router closer to the garage. Wi-Fi signals weaken over distance and through walls. Once the device connects, you can move it back to its permanent location.
If you are using a Wi-Fi network that requires you to log in through a web page (common in apartments or offices), myQ will not work on that network. You will need a standard home Wi-Fi network with a password. If you only have access to a captive portal network, you may not be able to use myQ.
Restart the myQ device by unplugging it for 10 seconds and plugging it back in. Then try adding it to the app again. If it still does not work, contact Chamberlain's support team—they can walk you through more detailed troubleshooting or determine if the device itself is faulty.
Frequently Asked Questions
Do I need a hub if my garage door opener is brand new?
Most new garage door openers still need the myQ hub to connect to Wi-Fi. Some very recent models have Wi-Fi built in, but you should check your opener's manual or the product listing to be sure. If Wi-Fi is not built in, you will need the hub.
Can I control my garage door if I am away from home?
Yes. Once your garage door is added to the myQ app and connected to Wi-Fi, you can open or close it from anywhere you have an internet connection on your phone. You do not need to be on the same Wi-Fi network as your garage.
What happens if my Wi-Fi goes down?
You will not be able to control the garage door remotely through the app. Your wall button and any existing remotes will still work normally. Once your Wi-Fi is back up, the app will reconnect automatically.
Can I use myQ with a garage door opener that is more than 20 years old?
The myQ hub works with most openers from the last 20 years, but very old openers may not be compatible. Check the myQ website or contact Chamberlain support with your opener's model number to confirm before you buy the hub.
Is there a monthly fee to use myQ?
The basic myQ app is free and lets you open and close your garage door remotely. myQ also offers a paid subscription called myQ Premium that adds features like scheduling, activity history, and alerts. You do not need the paid version to program and use your garage door.