Where to find the time controls on your Samsung oven
The time button on most Samsung ovens is located on the control panel below the display screen. Look for a button labeled Time, Clock, or sometimes Set. On some models, the time controls are grouped with other settings buttons on the right side of the panel. If your model has a touchscreen display instead of physical buttons, the time setting is usually accessed through an on-screen menu.
The exact location varies slightly between Samsung oven models — built-in wall ovens, slide-in ranges, and freestanding ranges all have slightly different layouts. Check your model number on the back or side of the unit if you are unsure which type you own. Your user manual will show you the exact button location for your specific model.
Key Takeaways
- Press the Time or Clock button on your control panel, then use the arrow buttons or number pad to enter the correct time.
- Most Samsung ovens require you to press Start or Confirm after entering the time to save the change.
- If your oven has a touchscreen, tap the settings or menu icon and look for a Clock or Time option in the display.
- Power outages reset the time to 12:00 on many models, so you may need to reset it after an electrical interruption.
Steps to change the time using physical buttons
Press and hold the Time or Clock button for two to three seconds until the time display begins to flash or a menu appears on screen. The display will show the current time with one section (hours or minutes) highlighted or blinking. Use the up and down arrow buttons to adjust the highlighted section to the correct number. On some models, you will see plus and minus buttons instead of arrows — these work the same way.
Once the hours are correct, press the right arrow button to move to the minutes section. Adjust the minutes using the up and down arrows until they match the current time. After both hours and minutes are set correctly, press the Start button or the Time button again to confirm and save the change. The display should stop flashing and show the new time in steady numbers.
If your oven has a number pad instead of arrow buttons, press Time, then use the number pad to type in the time directly. For example, to set 2:30 PM, you might type 1430 or 230 depending on whether your oven uses 24-hour or 12-hour format. Check your manual to confirm which format your model uses before entering the time.
Changing the time on a touchscreen Samsung oven
Tap the Settings or Menu icon on your touchscreen display — this is usually represented by three horizontal lines or a gear symbol in the upper corner. Scroll down through the menu options until you see Clock, Time, or Date and Time. Tap that option to open the time adjustment screen.
The touchscreen will display the current time with the hours and minutes separated. Tap the hour field and use the on-screen plus and minus buttons or the number pad that appears to change it to the correct hour. Then tap the minutes field and adjust it the same way. Once both are correct, tap Confirm, Save, or Done to explore the change. The time should update when ready on your display.
What to do if the time keeps resetting
If your oven time resets to 12:00 every time you turn it off or after a power outage, this is normal behavior on most Samsung models. The oven is not broken — it straightforward does not retain the time setting when power is interrupted. You will need to reset the time after each outage or power loss. This is different from a clock that runs on a battery backup, which Samsung ovens typically do not have.
If the time resets even when the power has not been interrupted, the oven may have a faulty control board or a loose connection inside the unit. Contact a Samsung service technician or a local appliance repair company to diagnose the problem. Do not attempt to open the control panel yourself, as this can damage the oven and void any remaining warranty.
Using the 12-hour versus 24-hour time format
Most Samsung ovens default to 12-hour format (with AM and PM), but some models allow you to switch to 24-hour format if you prefer. To change the format, access the Settings or Menu on your control panel or touchscreen and look for an option labeled Time Format, Clock Format, or Display Format. Select the format you want, then confirm the change.
If you are unsure which format your oven is currently using, look at the display after you set the time. If it shows a time like 2:30 with no AM or PM indicator, it is likely using 24-hour format (where 14:30 would be 2:30 PM). If it shows AM or PM next to the time, it is using 12-hour format. Your user manual will confirm which format your specific model supports.
Troubleshooting common time-setting problems
If the display does not respond when you press the Time button, the control panel may be locked. Look for a Lock or Child Lock button on your oven — press and hold it for three seconds to unlock the controls. Once unlocked, try setting the time again. If the panel is still unresponsive, unplug the oven for 30 seconds, then plug it back in to reset the control board.
If you enter the time but it does not save after you press Start or Confirm, the oven may not have registered your input. Try pressing the buttons more deliberately and wait for the display to respond before moving to the next step. If the time still will not save, the control board may need replacement — contact Samsung support or a repair technician for information.
If the display shows the wrong time even after you have set it correctly, and the oven has not lost power, the clock circuit inside the control board may be failing. This is a hardware issue that cannot be fixed by adjusting settings. A technician will need to replace the control board or the clock module to restore accurate timekeeping.
Finding your Samsung oven's user manual
If you do not have your printed user manual, you can read it from Samsung's support website. Go to samsung.com/us/support, enter your oven's model number (found on a sticker inside the oven or on the back), and select your product. The manual will be available as a PDF file under the Downloads section. You can also search for your model number plus "user manual" in a search engine to find the document on other appliance documentation sites.
The user manual contains step-by-step instructions specific to your model, including diagrams of the control panel and detailed descriptions of every button and setting. It also lists the customer service phone number for Samsung if you need additional support. Keeping a copy of the manual in a drawer near your oven makes it straightforward to reference when you need to adjust settings or troubleshoot a problem.
Frequently Asked Questions
Why does my Samsung oven time reset to 12:00 after I unplug it?
Samsung ovens do not have battery backup for the clock, so the time resets when power is lost. This is normal. You will need to reset the time after any power outage or if you unplug the oven for cleaning or maintenance. If the time resets while the oven is plugged in and the power has not been interrupted, contact a repair technician.
Can I set the time to 24-hour format on my Samsung oven?
Some Samsung models support 24-hour format, but not all. Check your user manual or look in the Settings menu for a Time Format or Clock Format option. If you do not see this option, your model only supports 12-hour format and cannot be changed.
What if my Samsung oven display is blank and I cannot see the time?
A blank display usually means the control board has lost power or is malfunctioning. Unplug the oven for 30 seconds, then plug it back in. If the display remains blank, the control board may need replacement. Contact Samsung support or a local appliance repair company for diagnosis.
Do I need to set the time every time I use my Samsung oven?
No. Once you set the time, it stays set until the oven loses power or the control board resets. You only need to adjust it after a power outage or if you want to change it for daylight saving time or other reasons.