Where to find the clock button and what it looks like

The clock on a Samsung stove is set using the Clock button, which is usually located on the control panel near the display screen. On most Samsung models, it's a dedicated button labeled "Clock" or sometimes marked with a clock icon. The exact position varies slightly between model lines — on some ranges it sits to the left of the display, on others to the right — but it's always within arm's reach of the timer and other time-related controls.

When you press the Clock button, the display will light up and show the current time (or a blank time if the clock has never been set). The numbers on the display will often start blinking, signaling that the stove is ready for you to enter a new time. This is your cue to begin entering the hours and minutes.

Key Takeaways

  • The Clock button is on the control panel near the display screen and is labeled "Clock" or marked with a clock icon.
  • Press Clock once to enter time-setting mode; the display will blink to show it's ready for input.
  • Use the number pad or arrow buttons to enter the time in 12-hour format, then press Clock again to confirm.
  • If your stove loses power, the clock will reset to 12:00 and you'll need to set it again.
  • Some Samsung models require you to hold the Clock button for a few seconds rather than press it once — check your manual if a single press doesn't work.

Entering the time using the number pad

Once the Clock button is pressed and the display is blinking, use the number pad on the control panel to type in the time. Enter the hours first, then the minutes. For example, if you want to set the time to 2:30 PM, you would press 2, then 3, then 0. The display will show these numbers as you type them.

Samsung stoves use 12-hour time format by default, so you don't need to enter 14:30 for 2:30 PM — just enter 2:30. After you've typed all the digits, press the Clock button again to confirm and lock in the time. The display will stop blinking and show the time you just entered.

Using arrow buttons if your model doesn't have a number pad

Some Samsung stove models, particularly older or compact units, don't have a full number pad. Instead, they use arrow buttons (up and down, or left and right) to adjust the time. Press the Clock button to enter setting mode, then use the arrow buttons to increase or decrease the hours and minutes one digit at a time.

This method is slower than typing on a number pad, but it works the same way. After you've adjusted the time to the correct hour and minute, press the Clock button again to save it. If you overshoot a number, keep pressing the arrow button — most Samsung models will cycle through the digits rather than stopping at 9.

What to do if the clock keeps resetting

If you set the clock and it resets to 12:00 the next time you use the stove, your stove has likely lost power — even briefly. This can happen during a power outage, after unplugging the stove for cleaning, or if a circuit breaker was tripped. The clock has no battery backup, so it cannot retain the time when power is cut.

To prevent this, make sure the stove is plugged in securely and that the circuit breaker serving the stove hasn't been switched off. If power loss happens frequently, contact an electrician to check the outlet and wiring. Each time the stove loses power, you'll need to reset the clock using the same steps above.

Confirming the time is set correctly

After you press Clock to confirm, the display should show the time you entered without blinking. The time should remain on the display at all times — if it disappears or goes blank after a few seconds, the setting may not have been saved. If this happens, press the Clock button again and repeat the process, making sure to press Clock a second time to confirm.

Some Samsung models display the time only when you're actively using the stove or when the display is lit. If you don't see the time on a dark display, this is normal — press any button on the control panel and the display should light up and show the current time.

Adjusting the time if it's slightly off

If the time you set is a few minutes off, you don't have to start over. Press the Clock button once to enter adjustment mode. Use the number pad or arrow buttons to change just the minutes (or hours, if needed), then press Clock again to confirm. You only need to re-enter the digits you want to change — the stove will update only what you type.

On some models, you may need to enter the full time again even if you're only changing the minutes. Check your stove's manual to see whether it allows partial updates. If you're unsure, entering the complete time is always safe and takes only a few seconds.

Finding your stove's manual if you're still stuck

If your stove model has a different button layout or the steps above don't match what you see, the manual is your best resource. You can find the Samsung manual by visiting Samsung's support website and entering your stove's model number (usually printed on a sticker inside the oven or on the back of the unit). read the PDF and search for "clock" to jump straight to the instructions for your specific model.

If you've lost the manual and can't find it online, contact Samsung customer service with your model number. They can walk you through the process over the phone or email you a copy of the relevant section. Most Samsung stove clocks work the same way, but some specialty or commercial models may have variations worth confirming before you spend time troubleshooting.

Frequently Asked Questions

Can I set the clock to 24-hour time instead of 12-hour?

Most Samsung home stoves do not have a setting to switch to 24-hour time format. They are designed to display and accept time in 12-hour format only. If your model does have this option, it will be in the settings menu accessed through a dedicated Settings or Menu button on the control panel — check your manual for the exact path.

What if the Clock button doesn't respond when I press it?

First, make sure the stove is powered on and the display is lit. If the display is dark, press any button to wake it up. If the Clock button still doesn't work, try holding it down for two to three seconds instead of tapping it — some models require a longer press. If nothing happens after that, the button may be stuck or the control panel may need service; contact Samsung or a local repair technician.

Does the clock keep running when the stove is off?

Yes, the clock continues to run even when the oven and stovetop are not in use. It's a separate system from the cooking functions. The only time the clock stops is if the stove loses electrical power entirely.

Why does my clock show the wrong time even after I set it?

The most common cause is that the stove lost power after you set it, which resets the clock to 12:00. Check whether a circuit breaker was tripped or the outlet was unplugged. If power is stable and the clock is still wrong, it may be running fast or slow due to an internal issue — contact Samsung support or a repair service to have it checked.