Sony turntables with Bluetooth connect wirelessly to your computer, but the method depends on which Sony model you own

Not all Sony turntables have Bluetooth built in. If your model has a Bluetooth button or a Bluetooth indicator light, it likely supports wireless connection. If you do not see either, your turntable may only work with a wired USB or RCA cable connection. Check your turntable's manual or the back panel to confirm Bluetooth capability before starting.

The basic process is the same across Sony models that support Bluetooth: put the turntable in pairing mode, make your computer discoverable, and complete the pairing in your computer's Bluetooth settings. The whole process usually takes under five minutes.

Key Takeaways

  • Only Sony turntables with a Bluetooth button or light can connect wirelessly; check your manual or the back panel to confirm your model supports it.
  • Put your turntable in pairing mode by holding the Bluetooth button for three to five seconds until the light blinks, then search for it in your computer's Bluetooth settings.
  • Once paired, your computer will remember the turntable and reconnect automatically when both devices are powered on and in range.
  • If pairing fails, restart both devices, clear any previous pairing attempts from your computer's Bluetooth list, and try again.

Check whether your Sony turntable has Bluetooth

Look for a button labeled "Bluetooth" or "BT" on the front or back of your turntable. Some Sony models have a small Bluetooth symbol (usually a stylized "B" with dots) printed near the button. If you see this button or symbol, your turntable supports Bluetooth connection.

If you cannot find a Bluetooth button, check the back panel for a Bluetooth indicator light — a small LED that lights up or blinks when the turntable is in pairing mode. Turntables without either of these features do not have Bluetooth and will require a wired connection using a USB cable or RCA cables instead.

Your turntable's manual will list Bluetooth as a feature if it is available. You can usually find the manual as a PDF on Sony's support website by searching for your model number.

Put your turntable into Bluetooth pairing mode

Press and hold the Bluetooth button on your turntable for three to five seconds. The Bluetooth indicator light should begin blinking — usually in blue or white. This blinking means the turntable is now discoverable and waiting for a connection from your computer.

If the light does not blink after holding the button, try holding it for a full ten seconds. Some Sony models require a longer press. If the light still does not respond, your turntable may not have Bluetooth, or the battery (if wireless) may be low.

Leave the turntable in pairing mode while you move to your computer. The pairing mode usually stays active for about two to three minutes, so you have time to complete the next steps.

Open Bluetooth settings on your computer and search for the turntable

On Windows, open Settings, select Devices, then choose Bluetooth and other devices. Make sure Bluetooth is turned on. Your computer will begin searching for nearby Bluetooth devices. On Mac, open System Preferences, select Bluetooth, and make sure Bluetooth is on.

Wait for your Sony turntable to appear in the list of available devices. It will usually show up with a name like "Sony Turntable" or a model number such as "PS-LX310BT". Once you see it, click or select it to begin pairing.

If your turntable does not appear after 30 seconds, make sure it is still in pairing mode (the light should still be blinking). If the light has stopped blinking, press and hold the Bluetooth button again for three to five seconds.

Complete the pairing and test the connection

When you select your turntable from the Bluetooth list, your computer will ask you to confirm the pairing. Click "Pair" or "Connect" to complete the process. Some computers may ask for a PIN code — if so, try entering "0000" or "1234", which are the default codes for most Sony turntables.

Once pairing is complete, the Bluetooth indicator light on your turntable should stop blinking and stay solid (usually blue or white). Your computer's Bluetooth settings should now show the turntable as "Connected" or "Paired".

To test the connection, open your computer's audio settings and set the turntable as the input device. Play a record and listen through your computer's speakers or headphones. If you hear sound, the connection is working.

Reconnect automatically after the first pairing

After the first successful pairing, your computer will remember your Sony turntable. The next time you turn on both devices and they are within Bluetooth range (usually 30 feet), they will reconnect automatically without you having to repeat the pairing steps.

If your turntable does not reconnect automatically, check that Bluetooth is enabled on both devices. On your computer, open Bluetooth settings and confirm the turntable is still listed as a paired device. If it is not, the pairing may have been lost and you will need to repeat the pairing process from the beginning.

Troubleshoot if pairing fails or the connection drops

If your turntable does not appear in the Bluetooth search, restart both devices completely. Turn off your turntable, wait ten seconds, and turn it back on. Do the same with your computer. Then put the turntable back into pairing mode and search again.

If the turntable was previously paired with another device (a phone or tablet, for example), it may still be trying to connect to that device instead of your computer. Go into your turntable's Bluetooth settings (if it has a menu) and clear all previous pairings, or hold the Bluetooth button for ten seconds to reset the Bluetooth module. Then try pairing with your computer again.

If the connection keeps dropping after pairing, move your turntable closer to your computer. Walls, metal objects, and other wireless devices (like microwaves or Wi-Fi routers) can interfere with Bluetooth signals. Also check that your computer's Bluetooth driver is up to date — on Windows, go to Device Manager and look for Bluetooth devices, then right-click and select "Update driver".

Frequently Asked Questions

Can I use a Sony turntable with Bluetooth on a Mac and Windows computer?

Yes. Sony turntables with Bluetooth work with both Mac and Windows computers. The pairing process is slightly different (Mac uses System Preferences instead of Windows Settings), but the steps are the same: put the turntable in pairing mode, search for it in your computer's Bluetooth settings, and select it to pair.

What if my Sony turntable has Bluetooth but my computer does not?

You can buy a USB Bluetooth adapter that plugs into your computer's USB port. These adapters cost between $10 and $30 and will add Bluetooth capability to any computer. Once plugged in, your computer will recognize the turntable the same way it would with built-in Bluetooth.

Do I need to keep the turntable plugged in to use Bluetooth?

Yes. Sony turntables with Bluetooth still require power from an electrical outlet to operate. Bluetooth only handles the wireless audio signal — it does not power the turntable itself. If your turntable has a battery, check your manual, as some models may have limited wireless range when running on battery power.

Can I connect multiple computers to the same Sony turntable?

Your turntable can be paired with multiple computers, but it can only connect to one at a time. If you want to switch from one computer to another, disconnect the turntable from the first computer (in Bluetooth settings, select "Forget" or "Unpair"), then reconnect it to the second computer. Since pairing information is saved, reconnecting usually happens automatically once you turn on both devices.

Why does my turntable keep disconnecting from Bluetooth?

Bluetooth disconnection usually happens because of interference from other wireless devices, distance between the turntable and computer, or outdated drivers. Move the turntable closer to your computer, turn off other wireless devices nearby, and update your computer's Bluetooth drivers. If disconnection continues, try clearing the pairing and pairing again from scratch.