Ring cameras use rechargeable lithium batteries that typically last three to six months between charges, depending on how often motion triggers recording

The battery sits inside the camera body and connects to a small metal contact strip. To replace it, you power off the camera, remove the faceplate, disconnect the old battery, and slide in a new one. The whole process takes about five minutes and requires no tools beyond what comes in the box.

Ring sells official replacement batteries, but third-party batteries marked as compatible with your specific model also work. The battery type depends on which Ring camera you own — Ring Doorbell (2nd Gen) uses a different battery than Ring Doorbell Pro, for example. Check your camera's model number before ordering.

Key Takeaways

  • Ring camera batteries are rechargeable and last three to six months per charge, so you will need to replace them periodically rather than permanently.
  • The battery slides out from inside the camera body after you remove the faceplate, and you do not need any tools to do this.
  • Your camera model number determines which battery fits — Ring Doorbell (2nd Gen), Ring Doorbell Pro, and Ring Doorbell Pro 2 all use different batteries.
  • Official Ring batteries cost between $20 and $30, and compatible third-party batteries are usually cheaper but carry a smaller warranty.

Locate your camera model and battery type

The model number appears on a sticker inside the camera body or on the original packaging. Common models include Ring Doorbell (2nd Gen), Ring Doorbell Pro, Ring Doorbell Pro 2, Ring Stick Up Cam, and Ring Indoor Cam. Each uses a different battery, so ordering the wrong one will not fit.

Once you know your model, search for the battery online using the exact model name. Ring's official website lists compatible batteries for each camera. If you bought the camera from Amazon, your order history will also show the model.

Power off the camera and remove the faceplate

Open the Ring app on your phone and navigate to your camera's settings. Look for a power or device settings option and select "Power Off" or "Shut Down." Wait 30 seconds for the camera to fully power down.

Once the camera is off, gently pry the faceplate away from the body using your fingernail or a plastic spoon. The faceplate is held on by magnets, not screws, so it will pop off with light pressure. Set it aside in a safe place.

Disconnect the old battery and install the new one

Inside the camera body, you will see the battery connected to a small metal contact strip by a thin wire or clip. Gently pull the battery away from the contact strip — it should slide out without resistance. If it feels stuck, do not force it; instead, wiggle it gently side to side.

Slide the new battery into the same slot, making sure the metal contacts align with the strip inside the camera. You will hear or feel a small click when the battery seats properly. Do not push hard; the battery should slide in smoothly.

Reattach the faceplate and power on the camera

Line up the faceplate with the camera body and press it firmly until it clicks into place. The magnets will hold it securely. Open the Ring app and power the camera back on through the settings menu.

The camera will take 30 to 60 seconds to boot up. Once it connects to your Wi-Fi, the app will show a full battery indicator. If the battery shows as low or the camera does not power on, remove the faceplate and check that the battery is fully seated in its slot.

Charging versus replacing — when to do each

Ring cameras are designed to be recharged, not replaced. If your battery drains quickly, the first step is to plug the camera into a power outlet using the included USB cable. Most Ring cameras can run on either battery power or wired power.

If your camera is already wired to power, the battery acts as a backup and should not drain. If it is draining while plugged in, the charging port may be dirty or damaged. Wipe the port gently with a dry cloth and try again. If the battery still will not charge after 24 hours, it may have reached the end of its lifespan and needs replacement.

Where to buy replacement batteries

Official Ring batteries are sold on Amazon, the Ring website, and some electronics retailers. Prices range from $20 to $30 depending on the model. These come with a one-year warranty and are may provide to work with your camera.

Third-party batteries marked as compatible are usually $10 to $15 cheaper. They work just as well in most cases, but the warranty is often shorter or nonexistent. Read the product reviews before ordering a third-party battery — look for comments from people with your exact camera model.

Troubleshooting after battery replacement

If the camera does not power on after you install the new battery, remove the faceplate and check that the battery is fully seated. The metal contacts should touch the strip inside the camera with no gaps. Slide the battery out and back in once more to may support a firm connection.

If the camera powers on but shows a low battery warning when ready, the new battery may be defective. Contact the seller for a replacement. If you bought an official Ring battery, Ring's customer service will send a replacement at no cost.

If the camera powers on but loses connection to Wi-Fi, restart it by powering off and on again through the app. This usually takes one to two minutes. If the connection still does not work, the battery replacement itself is not the cause — the issue is likely with your Wi-Fi network or the camera's settings.

Frequently Asked Questions

Can I use any rechargeable battery in my Ring camera?

No. Ring cameras use specific battery models that fit the internal slot and match the voltage requirements. Using the wrong battery can damage the camera or cause it to malfunction. Always check your camera model before ordering.

How long does a new battery last before I have to replace it again?

A new battery typically lasts three to six months per charge, depending on how often your camera records. Cameras in high-traffic areas with frequent motion triggers drain faster than cameras in quiet locations. If your camera is wired to power, the battery may last a year or longer because it charges continuously.

What should I do with the old battery?

Lithium batteries should not go in the trash. Most electronics retailers and battery shops accept old batteries for recycling. Some municipalities also have battery drop-off days. Check your local waste management website for the nearest recycling location.

Will replacing the battery erase my camera footage or settings?

No. The battery replacement does not affect your footage, recordings, or camera settings. Everything stored in the cloud remains intact, and your camera will reconnect to the same Wi-Fi network and app account after you power it back on.

Do I need to reset my camera after installing a new battery?

No reset is necessary. straightforward power the camera back on through the app, and it will reconnect automatically. If it does not reconnect within two minutes, restart it once more by powering off and on again.