The quickest way to reset your Drew Barrymore coffee maker

Most Drew Barrymore coffee makers reset by unplugging the machine for 30 seconds, then plugging it back in. This clears the internal memory and stops error codes or stuck brew cycles. If your model has a dedicated reset button—usually a small recessed button on the back or bottom—hold it for three to five seconds while the machine is plugged in.

Before you reset, check whether the problem is actually something simpler: a full water reservoir, a clogged filter basket, or a carafe that isn't seated properly will all prevent the machine from starting or completing a brew. If those are fine and the machine still won't respond, a reset is the next step.

Key Takeaways

  • Unplug the machine for 30 seconds to perform a soft reset that clears error codes and restarts the brewing cycle.
  • Some Drew Barrymore models have a recessed reset button on the back or bottom that you hold for three to five seconds while plugged in.
  • Check that the water reservoir is full, the filter basket is clean, and the carafe is seated correctly before resetting.
  • If the machine still will not turn on or brew after a reset, the heating element or power cord may need professional inspection.

Locating the reset button on your specific model

Drew Barrymore makes several coffee maker models, and not all of them have a physical reset button. The button, when present, is usually a small recessed circle on the back panel or the bottom of the machine—you may need a pen or paperclip to press it. Check your user manual first by searching the model number (printed on a sticker under the machine or on the original box) plus "manual" online.

If you cannot find a manual and there is no visible button, the unplugging method is your reset option. Unplug the machine completely, wait 30 seconds, and plug it back in. This works for nearly all electric coffee makers because it forces the internal circuit board to restart.

What causes Drew Barrymore coffee makers to need a reset

Error codes, frozen brew cycles, and unresponsive buttons usually mean the machine's internal processor has gotten stuck. This happens most often after a power outage, if the machine was unplugged mid-brew, or if water splashed into the control panel. A reset tells the processor to start fresh.

If your machine keeps showing the same error code after multiple resets, or if it resets but then when ready shows an error again, the problem is likely a faulty sensor or heating element rather than a software glitch. At that point, a reset will not fix it, and you should contact Drew Barrymore customer service or consider repair options.

Step-by-step reset process

For machines without a reset button: Unplug the coffee maker from the wall outlet. Wait 30 seconds—this gives the internal capacitors time to fully discharge. Plug it back in. The display should light up or the machine should respond to button presses. If it does not, wait another minute before trying to brew.

For machines with a reset button: Keep the machine plugged in. Use a pen or paperclip to press and hold the reset button for three to five seconds. You may hear a beep or see the display flash. Release the button and wait 10 seconds. The machine should now be ready to use.

After resetting, fill the water reservoir with fresh water, insert a clean filter and ground coffee, and run a test brew. If the machine works normally, the reset solved the problem. If it displays an error again or will not start, move on to troubleshooting the power cord and outlet.

When a reset will not solve the problem

A reset cannot fix a broken heating element, a cracked water reservoir, or a damaged power cord. If your Drew Barrymore coffee maker will not turn on even after resetting and you have confirmed the outlet works (test it with another appliance like a lamp), the power cord itself may be faulty.

If the machine turns on but will not heat water, or if water leaks from the bottom during brewing, these are mechanical failures that require repair or replacement. A reset will not restore function in these cases. Contact Drew Barrymore's customer service line—the number is usually on the back of the machine or in the original documentation—to discuss repair options or warranty coverage.

Preventing the need for frequent resets

Keep your Drew Barrymore coffee maker away from water splashes and steam. Wipe down the exterior and control panel weekly with a dry cloth. Never pour water directly over the buttons or display. If you live in an area with frequent power outages, consider using a surge protector to prevent electrical spikes from damaging the internal circuit board.

Clean the water reservoir and filter basket after every use, and descale the machine once a month by running a brew cycle with equal parts white vinegar and water, then running two cycles with plain water. A clean machine is less likely to develop sensor errors that trigger the need for a reset.

Frequently Asked Questions

Will resetting my Drew Barrymore coffee maker erase my settings?

Most Drew Barrymore models do not have programmable settings to save, so a reset will not erase anything. If your model has a delay-brew timer or a strength setting, those may return to factory defaults after a reset. Check your manual to see what settings your specific model stores.

How long should I wait after unplugging before plugging back in?

Wait at least 30 seconds. This gives the internal capacitors time to fully discharge. Waiting longer—up to a minute—does not hurt and may help if the machine had a severe freeze. After plugging back in, wait another 10 to 15 seconds before pressing any buttons.

Can I reset my coffee maker while it is in the middle of brewing?

Yes, unplugging it mid-brew is actually one of the most common reasons a reset becomes necessary. Unplug it, wait 30 seconds, plug it back in, and the machine should restart normally. Empty the carafe and filter basket first, then run a fresh brew cycle.

What does it mean if my coffee maker resets itself randomly?

Random resets usually mean the power cord is loose, the outlet is faulty, or there is an electrical surge in your home. Try plugging the machine into a different outlet in another room. If it still resets randomly, the power cord or internal circuit board may be failing and should be inspected by a professional.