How to Remove the Stand from Your Samsung Monitor

Removing the Stand: The Basic Steps

To remove the stand from your Samsung monitor, you will need to access the release clips or screws on the underside of the base, then slide or unscrew the stand away from the monitor arm. The exact method depends on your model — some use quick-release clips that require no tools, while others use screws that need a Phillips-head screwdriver. Most Samsung monitors can be stand-free in under two minutes once you know where to look.

Before you start, place your monitor face-down on a soft, clean surface like a towel or blanket to protect the screen. Make sure the power cable and any other connections are unplugged first. Have a Phillips-head screwdriver nearby in case your model uses screws rather than clips.

Key Takeaways

Place your monitor face-down on a padded surface and unplug all cables before attempting to remove the stand.
Look for either quick-release clips or Phillips-head screws on the underside of the base where the stand connects to the monitor arm.
If your model has clips, press or slide them inward to release the stand; if it has screws, remove all of them before pulling the stand away.
Once the stand is off, you can attach a VESA-compatible monitor arm or wall mount if your monitor supports VESA mounting.

Finding the Release Mechanism on Your Model

Samsung monitors use one of two main attachment systems. The first is a quick-release clip system, where small plastic tabs or levers sit on either side of the base connection point. These clips are usually labeled with arrows or small icons showing which direction to push or slide. Look directly underneath where the stand meets the monitor arm — the clips will be visible from below.

The second system uses Phillips-head screws, typically three to four of them arranged in a circle or line around the base connection. If you see screw heads instead of clips, you will need your screwdriver. Write down or photograph the screw positions before you remove them so you know where they go if you need to reattach the stand later.

If you cannot find either system, check the monitor's manual or the underside of the base more carefully — sometimes clips are recessed slightly and require you to look at an angle. You can also search your monitor's model number (usually printed on the back) plus "remove stand" on Samsung's support website to find the exact instructions for your unit.

Releasing Clip-Based Stands

If your monitor has quick-release clips, press or slide each clip inward toward the center of the base connection. You should feel or hear a small click as the clip releases. Some Samsung models require you to press both clips simultaneously, while others let you release them one at a time — try both approaches if the stand does not move after pressing one clip.

Once the clips are released, gently pull the stand straight away from the monitor arm. Do not twist or angle it — pull directly outward. The stand should slide off smoothly without resistance. If it feels stuck, double-check that both clips are fully released and try again. Forcing it can crack the plastic connection points.

Removing Screw-Based Stands

Using your Phillips-head screwdriver, remove all visible screws from the base connection point. Keep the screws in a small container or bag so you do not lose them — you may need them later if you want to reattach the stand. Turn each screw counterclockwise until it comes free, and set them aside in order.

Once all screws are removed, the stand should pull straight away from the monitor arm without any resistance. If it still feels tight, check that you have removed every screw — sometimes one is hidden under a label or sticker. Once it comes free, inspect the connection point for any plastic tabs or clips you may have missed, though screw-based models rarely have both systems.

What to Do After the Stand Is Off

After removing the stand, you will see the VESA mounting holes on the back of the monitor — a square pattern of four threaded holes. Check your monitor's manual or the back panel to confirm the VESA size (usually 75×75 mm or 100×100 mm). This tells you which monitor arms, wall mounts, or desk clamps will fit your monitor.

If you plan to use a monitor arm or wall mount, purchase one that matches your monitor's VESA size and weight capacity. The weight is usually printed on the back of the monitor or in the manual. Do not attempt to mount the monitor without confirming both the VESA size and that the mount can safely support your monitor's weight.

If you want to store the stand for later use, keep the screws or clips with it in a labeled bag. Store it in a dry place where it will not get bent or cracked. If you ever need to reattach it, the process is straightforward the reverse — align the stand with the VESA holes and either insert screws or snap the clips back into place.

Common Mistakes to Avoid

The most common mistake is placing the monitor face-up instead of face-down while removing the stand. This puts pressure on the screen and risks cracking it if you accidentally press down. Always work with the monitor facing down on a padded surface.

Another frequent error is forgetting to unplug the monitor before flipping it. Even though you are not working with the power button, unplugging removes any electrical charge and is a basic safety step. It also prevents accidental button presses that could turn the monitor on while it is face-down.

Do not force the stand if it feels stuck. If clips do not release smoothly or screws do not turn easily, stop and re-examine the connection point. Forcing it can strip screw threads or crack the plastic housing, making the stand unusable and potentially damaging the monitor's VESA mounting area.

Frequently Asked Questions

Can I remove the stand without unplugging the monitor?

Technically yes, but you should not. Unplugging takes 10 seconds and removes any risk of electrical shock or accidental power-on. It is the safest approach and takes no extra time.

What if the screws are stuck or will not turn?

Try explore a small amount of penetrating oil like WD-40 around the screw head and wait a few minutes. Use a screwdriver that fits the screw head snugly — a loose fit will strip the screw. If it still will not budge, stop and contact Samsung support rather than risk damaging the threads.

Do all Samsung monitors have VESA mounting holes?

Most modern Samsung monitors do, but some budget models or curved displays may not. Check your manual or the back of the monitor for the four-hole pattern. If your monitor lacks VESA holes, you cannot use a standard monitor arm or wall mount.

Can I reattach the stand after removing it?

Yes, as long as you keep the screws or clips and they are not damaged. straightforward align the stand with the VESA holes and either insert the screws or snap the clips back into place. The process is the reverse of removal.

What size VESA mount do I need?

Check your monitor's manual or the back panel for the VESA size — usually 75×75 mm or 100×100 mm. The manual will also list the monitor's weight, which you need to confirm your new mount can support it safely.

This guide is for general information only and is not medical, financial, legal, or other professional advice. For decisions specific to your situation, consult a qualified professional. See our Editorial Policy.