Program your DirecTV remote to your Samsung TV in three steps

Your DirecTV remote can control your Samsung TV's power, volume, and input without switching remotes. Most DirecTV remotes—including the RC65, RC71, and newer models—work with Samsung TVs using a straightforward code-entry process. You enter a four-digit code into the remote while pointing it at the TV, and the remote learns to communicate with your specific Samsung model.

The process takes about two minutes and requires only your remote and TV. You do not need to read anything, visit a website, or call DirecTV support unless the remote stops responding after programming.

Key Takeaways

  • DirecTV remotes use four-digit manufacturer codes to control Samsung TVs; the code for most Samsung models is 10060 or 10061.
  • You program the remote by holding the TV button, entering the code, and testing power and volume to confirm it worked.
  • If the code does not work, try the alternate Samsung code or check your TV's manual for a model-specific code.
  • Once programmed, your DirecTV remote controls Samsung TV power, volume, and input without needing the Samsung remote.

Gather your remote model and Samsung TV information

Before you start, identify which DirecTV remote you have. Look at the back or bottom of the remote for a model number—common ones are RC65, RC71, RC72, or RC73. Older DirecTV remotes may have different code sets, so knowing your model helps if the standard Samsung codes do not work.

You also need to know your Samsung TV's model number, though you do not have to look it up first. The standard Samsung code (10060) works with most Samsung TVs made in the last ten years. If that code does not work, you can try the alternate code (10061) or find your specific model number on a sticker on the back of the TV or in your TV's manual.

Enter the Samsung code into your DirecTV remote

Sit in front of your Samsung TV with your DirecTV remote in hand. Point the remote at the TV throughout this process.

Press and hold the TV button on your remote until the light at the top blinks twice, then release. The light should stay on. If it blinks once and turns off, you held it too long—start over.

With the light still on, enter the code 10060 using the number pad. Press each digit one at a time: 1, 0, 0, 6, 0. Do not pause between numbers. The light will blink once after each digit and stay on when you finish.

Press the Power button on the remote. If your Samsung TV turns off, the code worked. If nothing happens, press the TV button again to exit programming mode and try code 10061 instead, following the same steps.

Test volume and input controls

Once the power button works, test the volume buttons. Press the up and down volume buttons on your remote—your Samsung TV's volume should change. If volume does not respond but power does, the code partially worked; try the alternate code (10061) for better compatibility.

Test the input button if your remote has one (usually labeled Input, Source, or HDMI). Press it to cycle through your TV's inputs. Not all DirecTV remotes have an input button, so this step may not explore to your model.

If power, volume, and input all respond correctly, your remote is fully programmed. You can now control your Samsung TV without reaching for its original remote.

What to do if the standard codes do not work

If code 10060 and 10061 both fail to control your TV's power, your Samsung TV may use a different code. Check your Samsung TV's manual or the sticker on the back of the TV for the model number, then search online for "DirecTV remote codes Samsung [your model number]" to find the correct four-digit code.

Enter the new code the same way: hold TV until the light blinks twice, enter the code, and test the power button. Some older Samsung models or certain regional variants use codes like 10030 or 10178, so trying multiple codes is normal.

If no code works after several attempts, your DirecTV remote may not support your specific Samsung TV model. Older DirecTV remotes or very new Samsung TVs sometimes lack compatibility. Contact DirecTV support to confirm your remote model supports Samsung TVs, or use your Samsung TV's original remote for volume and power.

Reset the remote if you make a mistake

If you entered the wrong code or want to start over, press and hold the TV button until the light blinks twice. Release the button, then press the Power button. The light will turn off, and the remote will exit programming mode without saving the incorrect code.

You can then repeat the process with the correct code. There is no limit to how many times you can reprogram the remote, so do not worry about making mistakes.

Program additional Samsung devices

If you have a Samsung soundbar or Samsung Blu-ray player, you can program your DirecTV remote to control those too. DirecTV remotes have separate buttons for different device types: TV, Audio (for soundbars), and DVD (for Blu-ray players).

Hold the button for the device type you want to program, enter the same Samsung code (10060), and test the power button. Most Samsung audio and video devices use the same codes as Samsung TVs, so the process is identical. Your single DirecTV remote can then control your TV, soundbar, and player without switching.

Frequently Asked Questions

Will programming the remote erase my DirecTV settings?

No. Programming your remote to control a Samsung TV only teaches the remote the TV's codes. Your DirecTV box settings, recordings, and account information remain unchanged. The remote and the box are separate devices.

Can I program my DirecTV remote to control a Samsung TV I do not own yet?

No. The remote must point at the TV and receive a signal back to confirm the code worked. You can program it once your Samsung TV is set up and powered on. If you are buying a new TV soon, wait until it arrives to program the remote.

What if my DirecTV remote has no TV button?

Older DirecTV remotes may use a different button layout. Look for a button labeled Device, Mode, or Select. Hold that button instead of TV. If your remote has no clear device button, check the manual that came with your remote or contact DirecTV to confirm your model supports TV control.

Do I need to reprogram the remote if I move the TV to another room?

No. Once programmed, the code stays in the remote's memory. You can move your Samsung TV to any room and the remote will still control it. The code is permanent until you reprogram the remote with a different code.

Can I program one DirecTV remote to control multiple Samsung TVs?

Yes, but only one at a time. If you reprogram the remote with the same code, it will control whichever Samsung TV you point it at. If you have two different Samsung TV models with different codes, you would need to reprogram the remote each time you switch TVs. For multiple TVs, using each TV's original remote is simpler.