Program your DirecTV remote to Samsung in three steps
Your DirecTV remote can control your Samsung TV's power, volume, and input without switching remotes. Most DirecTV remotes work with Samsung TVs using a straightforward three-step pairing process: put the remote in learning mode, enter a Samsung code, and test the buttons. The whole process takes about five minutes and requires only your remote and TV.
The exact steps depend on which DirecTV remote model you have — the older silver RC65 remote works differently from the newer black Genie remotes — but both use the same basic code-entry method. You do not need to read anything or contact DirecTV support; the pairing happens entirely on your remote.
Key Takeaways
- DirecTV remotes pair with Samsung TVs by entering a four-digit code after pressing specific buttons; the code tells the remote how to communicate with your TV model.
- The RC65 silver remote and the newer Genie black remote use different button sequences to enter pairing mode, so you need to know which one you have.
- Samsung TV codes for DirecTV remotes include 0060, 0061, 0062, and 0178, and you may need to try more than one if your TV model is not recognized by the first code.
- After entering the code, test the power and volume buttons to confirm the pairing worked before you put the remote away.
Identify your DirecTV remote model
The pairing steps are different for each remote type, so check which one you have before you start. The RC65 remote is silver or gray, has a rectangular shape, and was common with older DirecTV boxes. The Genie remote is black, has a more rounded design, and comes with newer DirecTV equipment. If you have a very old remote with a green DirecTV logo at the top, those steps are different and less reliable; consider upgrading to a Genie remote if pairing fails.
You can also check your DirecTV box itself — the model number is usually printed on the front or back. Genie boxes are labeled HR54, HR44, or similar; older boxes are labeled HR24 or lower. If you are unsure, the Genie remote method works with most Samsung TVs made in the last ten years, so start there.
Program an RC65 remote to your Samsung TV
Hold down the Mute and Select buttons together for about three seconds until the green light at the top of the remote blinks twice. This puts the remote into learning mode. Release the buttons and wait for the light to stop blinking.
Press the TV button at the top of the remote to tell it you are programming TV controls. Then enter one of the Samsung codes: 0060, 0061, 0062, or 0178. Start with 0060. The green light will blink once after each digit you press. After you enter all four digits, the light should blink twice to confirm the code was accepted.
Point the remote at your Samsung TV and press the Power button. If the TV turns off, the pairing worked. If nothing happens, press the TV button again and try the next code (0061, then 0062, then 0178). Most Samsung TVs respond to one of these four codes.
Program a Genie remote to your Samsung TV
Press and hold the Mute and Select buttons together for about three seconds until the light at the top of the remote blinks twice. Release the buttons. This puts the Genie remote into pairing mode, just like the RC65.
Press the TV button to select TV controls. Then enter one of the Samsung codes: 0060, 0061, 0062, or 0178. The light will blink once after each digit. After the fourth digit, the light should blink twice to show the code was accepted. If the light blinks three times or does not blink at all, the code did not work; try the next one.
Test the pairing by pointing the remote at your TV and pressing Power. The TV should turn off. If it does not, press TV again and enter the next code. Once the power button works, test the volume buttons to make sure those are paired too.
What to do if none of the codes work
If you have tried all four Samsung codes and the remote still does not control your TV, your TV model may use a code that is not in the standard list. This is rare but happens with some older or regional Samsung models. Try the pairing process one more time with code 0060, because that is the most common Samsung code and sometimes works on the second attempt.
If the remote still does not respond, check that your TV is powered on and that you are pointing the remote directly at the TV's infrared sensor (usually a small dark circle on the front). If the sensor is blocked by a soundbar or cabinet, move the TV or reposition the remote. You can also try standing closer to the TV — weak batteries in the remote can make pairing seem to fail when the signal is just too weak to reach the TV from far away.
If pairing still does not work after these steps, contact DirecTV support. They can confirm whether your specific TV model is compatible with your remote or suggest an alternative control method. Some newer Samsung TVs can also be controlled through the DirecTV app on your phone, which is a workaround if remote pairing fails.
Test all the buttons you use most
Once the power button works, test the volume up and down buttons, the input or source button, and any other buttons you use regularly. Most DirecTV remotes pair all TV controls at once when you enter the code, so if power works, volume should work too. But it is worth checking before you put the remote away.
If the power button works but volume does not, the pairing may be incomplete. Try the pairing process again with a different Samsung code. If volume works but the input button does not, that button may not be supported on your TV model — this is normal and does not mean the pairing failed.
Unpair the remote if you need to start over
If you want to clear the pairing and start fresh, press and hold Mute and Select for three seconds until the light blinks twice, then press and hold the TV button for three seconds. The light will blink three times to show the pairing has been erased. You can then start the pairing process again with a different code.
You may need to do this if you switch to a different Samsung TV or if the pairing stops working after a power outage. Power outages can sometimes reset the remote's memory, so re-pairing after an outage is normal.
Frequently Asked Questions
Can I use the same remote to control both my DirecTV box and my Samsung TV?
Yes, that is the whole point of pairing. Once you enter the Samsung code, the same remote controls both the DirecTV box and the TV. You do not need two remotes. The TV button at the top of the remote switches between controlling the box and controlling the TV.
Will pairing erase any of my DirecTV remote settings?
No. Pairing only adds Samsung TV control to your remote; it does not change any DirecTV settings or delete any stored information. Your remote will work exactly as it did before, with the addition of TV control.
What if my Samsung TV is very old — will it still pair?
Most Samsung TVs made in the last fifteen years will pair with DirecTV remotes using the codes listed here. Very old TVs (pre-2008) may not have infrared receivers that work with DirecTV codes. If your TV is older than that, check the TV manual or contact Samsung support to see if it supports universal remote codes.
Do I need to pair the remote every time I turn on the TV?
No. Once you pair the remote using the code-entry method, the pairing stays in the remote's memory permanently. You only pair once. The remote will control your TV every time you use it until you unpair it or replace the remote.
Can I pair my DirecTV remote to multiple Samsung TVs?
No. The remote can only be paired to one TV at a time. If you have multiple Samsung TVs and want to control both, you would need a separate remote for each TV, or you can unpair and re-pair the same remote each time you move it to a different room.