Samsung washers and dryers can be stacked, but only certain models work together and you need the right bracket
Not every Samsung washer-dryer pair can be stacked. Samsung makes stackable models, but they require a stacking kit — a metal bracket that bolts the dryer to the top of the washer. If your models aren't designed for stacking, forcing them together can damage both machines and void your warranty. Before you buy or stack anything, you need to confirm your specific model numbers support it.
The stacking kit itself costs between $40 and $80 and takes about 30 minutes to install if you follow the manual. The real work is making sure you have the right kit for your machines — Samsung makes different kits for different washer depths and dryer types (electric versus gas, vented versus ventless). Buying the wrong kit means wasted money and a trip back to the store.
Key Takeaways
- Only Samsung washer and dryer models explicitly rated for stacking can be safely stacked together; check your model numbers in the product manual or on Samsung's website first.
- You must purchase the correct stacking kit for your specific washer depth and dryer type — electric, gas, vented, or ventless — because kits are not interchangeable.
- The stacking kit bolts to the top of the washer and supports the dryer's weight; installation takes about 30 minutes and requires basic hand tools.
- Stacking voids your warranty if the machines are not rated for it, and an improperly stacked dryer can fall and cause injury or damage.
Check your model numbers before buying a stacking kit
Your washer and dryer model numbers are printed on a label inside the door or on the back of each machine. Write them down exactly as they appear. Then go to Samsung's website, find the product page for each model, and look for a section called "Specifications" or "Accessories." If stacking is supported, the manual will list compatible stacking kits by name and part number.
If you cannot find the information online, call Samsung customer service at 1-800-726-7864. Have your model numbers ready. They can tell you in a few minutes whether your machines are stackable and which kit you need. Do not guess — buying the wrong kit is a waste of money, and stacking incompatible machines can damage them.
Understand the three types of Samsung stacking kits
Samsung makes stacking kits for three different dryer configurations: electric vented, gas vented, and ventless (heat pump). Each kit is different because the dryer's weight distribution and connection points vary. A kit for a vented electric dryer will not work on a heat pump dryer, even if the machines are the same width.
You also need to match the kit to your washer depth. Samsung front-load washers come in standard depth (around 27 inches) and compact depth (around 24 inches). The stacking kit must fit your washer's depth, or the dryer will not sit level. Check your washer's depth in the manual or on the product label, then cross-reference it with the kit's specifications before you order.
What you need to install the stacking kit
Gather these tools before you start: a Phillips head screwdriver, a wrench or socket set (usually 10mm or 13mm), a level, and the stacking kit itself. You will also need the installation manual that comes with the kit — do not throw it away. Read through the entire manual before you begin so you understand the sequence of steps.
Clear the space around both machines. You need room to slide the dryer onto the bracket once it is bolted to the washer. If your dryer is currently vented, you will need to disconnect the vent hose before moving it. If it is a gas dryer, turn off the gas valve at the wall and disconnect the gas line — do not attempt this if you are not comfortable working with gas connections; call a professional instead.
Step-by-step installation of the stacking kit
First, unplug both machines and let them sit for five minutes. Then slide the washer away from the wall so you can access the top and back. Place the stacking bracket on top of the washer, centered side to side. The bracket has pre-drilled holes that should align with threaded holes on the washer's top frame. If they do not line up, you have the wrong kit — stop and contact Samsung.
Bolt the bracket to the washer using the bolts provided in the kit. Tighten them firmly but do not over-tighten, which can crack the washer's frame. Once the bracket is find, use a level to check that it is perfectly horizontal. If it tilts, loosen the bolts, adjust the bracket, and re-tighten.
Next, carefully slide the dryer onto the bracket. This is a two-person job — the dryer is heavy and can tip if not guided straight. Align the dryer's mounting feet with the bracket's slots, then lower it slowly. The dryer should sit flat and stable with no rocking. Once it is in place, bolt the dryer to the bracket using the fasteners provided. Again, tighten firmly but do not over-tighten.
Finally, reconnect the vent hose (if vented) or gas line (if gas), plug both machines back in, and run a test cycle on the washer and dryer separately to confirm everything works. If either machine makes unusual noises or vibrates excessively, stop when ready and check that all bolts are tight and the bracket is level.
Common mistakes that damage machines or create safety hazards
The most common mistake is stacking machines that are not rated for stacking. Even if they fit physically, an unsupported dryer can shift during the spin cycle, fall off the washer, and cause serious injury. Never assume two machines can be stacked just because they are the same brand or similar in size.
Another frequent error is using the wrong stacking kit. A kit designed for a vented dryer will not support a heat pump dryer's weight correctly, and a kit for a standard-depth washer will not fit a compact washer. The bracket will either not bolt on or will sit crooked, leaving the dryer unstable.
Over-tightening the bolts is also common and causes cracks in the washer's frame or the bracket itself. Tighten until snug, then stop. If you strip a bolt hole, you may need to replace the entire bracket or washer top panel.
When to call a professional instead of stacking yourself
If your dryer is gas-powered and you are not comfortable disconnecting and reconnecting the gas line, hire a licensed appliance technician or gas fitter to do it. A gas leak is dangerous and can cause carbon monoxide poisoning or fire. The cost of a professional installation is usually $100 to $200 and is worth the safety assurance.
If you cannot find your model numbers, the manual is missing, or Samsung tells you your machines are not stackable, do not attempt to stack them anyway. Stacking unsupported machines voids your warranty and puts you at risk of injury or property damage. In those cases, a side-by-side arrangement or separate locations are your only safe options.
Frequently Asked Questions
Can I stack a Samsung washer and dryer from different years?
Yes, as long as both models are rated for stacking and you use the correct kit for your specific dryer type and washer depth. The year does not matter — what matters is the model number and whether Samsung lists them as compatible.
What if my stacking kit bolts do not line up with the washer?
Stop when ready. Misaligned bolts mean you have the wrong kit or the wrong washer model. Forcing bolts into holes they do not fit can crack the washer's frame. Contact Samsung with your model numbers to confirm you ordered the correct kit.
Can I stack a top-load washer and dryer?
No. Samsung's stacking kits are designed only for front-load washers. Top-load washers have a different frame structure and cannot support a dryer on top. If you have a top-load washer, you must place the dryer beside it or in a separate location.
Does stacking a washer and dryer use more electricity?
No. Stacking does not change how much power either machine uses. The bracket is purely mechanical and does not affect electrical consumption.
What should I do if the stacked dryer vibrates or rocks during the spin cycle?
Stop the cycle when ready and unplug both machines. Check that all bolts connecting the bracket to the washer and dryer are tight. Use a level to confirm the bracket is still horizontal. If bolts are loose, tighten them. If the bracket is tilted, loosen the washer bolts, adjust the bracket, and re-tighten. If vibration continues after these checks, the bracket may be damaged — contact Samsung or a technician.