Pairing a new or replacement Fire Stick remote takes two to three minutes and requires only your Fire Stick and the remote itself

The Fire Stick remote pairs to your device through Bluetooth, not Wi-Fi. When you first unbox a remote or replace one that stopped working, the pairing process is straightforward: hold the remote close to the Fire Stick (within 6 inches), press and hold the Home button for about 10 seconds, and wait for the pairing confirmation on your TV screen. The remote will then work with your Fire Stick when ready.

If you are replacing a remote that stopped responding, you may need to re-pair it even if it is the same model you used before. The pairing is specific to that Fire Stick device, so a remote that worked with one Fire Stick will not automatically work with another without going through the pairing steps again.

Key Takeaways

  • Hold the remote within 6 inches of the Fire Stick and press Home for 10 seconds to start pairing.
  • You will see a pairing confirmation message on your TV screen when the remote connects successfully.
  • A single remote can be paired to only one Fire Stick at a time, though you can re-pair it to a different device later.
  • If pairing fails, replace the remote batteries and try again, as low battery power prevents the Bluetooth connection from establishing.

Step-by-step pairing for a new or replacement remote

Start with fresh batteries in your remote. Open the battery compartment on the back of the remote, remove any old batteries, and insert two new AA batteries, making sure the positive and negative ends are aligned correctly. Low or dead batteries are the most common reason pairing fails, so this step matters even if the remote is brand new.

Turn on your Fire Stick and TV. Make sure your Fire Stick is powered on and displaying the home screen on your TV. If you are setting up a Fire Stick for the first time, complete the initial setup steps first — you cannot pair a remote to a Fire Stick that is still in setup mode.

Hold the remote close to the Fire Stick device itself, not the TV. The Fire Stick is the small box connected to your TV's HDMI port. Position the remote within 6 inches of the Fire Stick's front panel. Press and hold the Home button (the button with a house icon at the top of the remote) for approximately 10 seconds without releasing.

Watch your TV screen for the pairing message. Within a few seconds of holding Home, you should see a notification on your TV that says "Pairing remote" or "Remote connected." Once you see this message, release the Home button. The remote is now paired and ready to use.

What to do if pairing does not work

Check the battery contacts inside the remote. Open the battery compartment again and look at the metal contacts where the batteries sit. If they appear corroded, dirty, or bent, wipe them gently with a dry cloth or cotton swab. Corrosion prevents the batteries from making proper contact, which stops the remote from powering on at all.

Restart your Fire Stick. Unplug the Fire Stick from power, wait 30 seconds, and plug it back in. Let it boot up completely before attempting to pair the remote again. A restart clears temporary connection issues that may prevent pairing from completing.

Try pairing from a different location. If you are near other wireless devices, move closer to the Fire Stick and away from other electronics. Bluetooth interference from routers, microwaves, or other devices can occasionally disrupt the pairing signal, though this is uncommon.

If the remote still does not pair after these steps, the remote itself may be faulty. Contact Amazon support with your Fire Stick model number and remote model number, both of which appear on the device packaging or in your account order history.

Pairing a second remote to the same Fire Stick

You can pair multiple remotes to a single Fire Stick, which is useful if you have one in the bedroom and one in the living room. Follow the same pairing steps for each remote: hold it within 6 inches of the Fire Stick, press Home for 10 seconds, and wait for the confirmation message. Each remote will work independently with that Fire Stick.

If you want to use a remote with a different Fire Stick, you will need to pair it to the new device using the same process. The remote will unpair from the old Fire Stick automatically once it pairs with the new one.

Pairing a Fire Stick remote to a Fire TV device

Fire TV devices (like Fire TV Cube or Fire TV Stick 4K) use the same pairing process as standard Fire Sticks. Hold the remote within 6 inches of the device, press Home for 10 seconds, and wait for the pairing confirmation on your screen. The steps are identical regardless of which Fire device you own.

If you have both a Fire Stick and a Fire TV device in your home, you will need separate remotes for each, or you will need to re-pair a single remote each time you switch between devices. Amazon does not support simultaneous pairing of one remote to multiple Fire devices.

Frequently Asked Questions

Can I pair a Fire Stick remote to my phone or tablet?

No. Fire Stick remotes use Bluetooth but are designed only for Fire Stick and Fire TV devices. If you want to control your Fire Stick from a phone, read the Amazon Fire TV app from the Google Play Store or Apple App Store, which works as a remote replacement on Android and iOS devices.

What if I lost my remote and do not have a replacement yet?

You can navigate your Fire Stick using the Fire TV app on your phone until a replacement remote arrives. The app provides all the same controls as a physical remote. You can also use voice commands through an Alexa device if you have one in your home.

Will a Fire Stick remote from an older model work with a newer Fire Stick?

Older Fire Stick remotes may work with newer models, but compatibility varies. The safest approach is to pair the older remote using the standard pairing steps. If it does not pair after multiple attempts, it may not be compatible with your newer Fire Stick model.

Do I need Wi-Fi to pair a Fire Stick remote?

No. Pairing uses Bluetooth and does not require an internet connection. Your Fire Stick must be powered on, but it does not need to be connected to Wi-Fi for the remote pairing process to work.

How do I unpair a remote from my Fire Stick?

Fire Stick does not have an unpair option in the settings menu. To stop using a remote with a Fire Stick, straightforward do not pair it to any device. If you want to use that remote with a different Fire Stick, pair it to the new device and it will automatically disconnect from the old one.