Your Fire Stick remote can control your TV's volume if you set it up to recognize your TV model

The Fire Stick remote comes with infrared (IR) capability built in, which means it can send signals to your TV just like your TV's original remote does. Out of the box, it controls Fire Stick functions only. To make it also adjust your TV's volume, you need to tell the remote what TV brand and model you own. Once you do, the remote learns the IR codes for your specific TV and can change the volume without you switching remotes.

This setup takes about five minutes and works with most TV brands made in the last 15 years. If your TV is very old or uses only Bluetooth (not infrared), this method will not work — but most standard TVs respond to IR signals.

Key Takeaways

  • The Fire Stick remote has infrared capability and can control TV volume once you pair it with your TV model through the Fire Stick settings menu.
  • You need to know your TV's brand and model number, which you can find on the TV itself or in your TV's manual.
  • The pairing process happens in Settings > Remotes and Devices > Amazon Fire TV Remote > Program Remote, and takes under five minutes.
  • If your TV does not respond after pairing, try unplugging the TV for 30 seconds and repeating the pairing process, or check whether your TV uses Bluetooth instead of infrared.

Find your TV brand and model number before you start

The Fire Stick remote needs to know what TV you own so it can send the right infrared signals. You can find this information on the TV itself or in your manual. Look on the back of the TV, the bottom bezel, or the side panel for a label with the brand name and model number. If you cannot find it on the TV, check your TV's original documentation or look up the manual online using the brand name and any numbers visible on the set.

Write down the brand (Samsung, LG, Sony, Vizio, TCL, and others) and the model number. You will enter these into the Fire Stick settings in the next step. If you are not sure whether you have the right number, take a photo of the label so you can reference it while setting up the remote.

Pair the remote to your TV through Fire Stick settings

Open the Fire Stick home screen and navigate to Settings at the top of the menu. Scroll down and select Remotes and Devices. Choose Amazon Fire TV Remote from the list of remotes. Select Program Remote.

The Fire Stick will ask you to choose your TV brand from a list. Scroll through and tap your brand name. Next, it will show you a list of model numbers for that brand. Find and select your model. The Fire Stick will then test the pairing by sending a signal to your TV — you may see a brief flash or hear a click from the TV's IR receiver.

Once the pairing completes, press the volume up button on your Fire Stick remote while pointing it at the TV. If the TV volume increases, the pairing worked. If nothing happens, try the pairing process again or move to the troubleshooting section below.

What to do if your TV brand is not on the list

If you cannot find your TV brand in the Fire Stick's list, it may be a regional brand, a very old model, or sold under a different name than you expect. Some TV manufacturers use multiple brand names in different countries. Try searching for your TV model online with the phrase "IR codes" to see whether it uses standard infrared signals at all.

If your TV is from a major brand but still does not appear, try selecting a similar or older model from the same brand — sometimes the IR codes are shared across model generations. If that does not work, you may need to use your TV's original remote for volume control, or explore whether your TV has a mobile app that can control volume from your phone.

Troubleshooting when the remote will not control volume

If you completed the pairing but the volume buttons do not work, start by unplugging your TV from the wall outlet for 30 seconds, then plug it back in. This resets the TV's IR receiver. Once the TV restarts, repeat the pairing process in Fire Stick settings.

Check that you are pointing the remote directly at the TV's front panel, not at the screen. The infrared sensor is usually on the bottom bezel or near the power button. If the remote is too far away (more than 20 feet), the signal may not reach. Move closer and try again.

If the remote still does not work, your TV may use Bluetooth instead of infrared, or the IR receiver may be damaged. Some newer smart TVs can be controlled through WiFi or Bluetooth rather than IR. Check your TV's manual to see what control method it supports. If your TV uses Bluetooth, you will need to pair the remote through your TV's Bluetooth settings instead of through the Fire Stick menu.

Using the remote for both Fire Stick and TV volume

Once pairing is complete, the volume buttons on your Fire Stick remote will control your TV's volume by default. If you want to adjust the Fire Stick's internal speaker volume (the volume of menu sounds and notifications), you will still need your TV's original remote or the Fire Stick app on your phone.

The Fire Stick remote remembers the TV pairing even if you unplug the Fire Stick or restart it. You do not need to pair again unless you get a new remote or change TV models. If you replace your Fire Stick with a newer model, you will need to pair the new remote to your TV using the same steps.

Alternative: use the Fire Stick mobile app to control volume

If your TV will not pair with the Fire Stick remote, you can read the Amazon Fire TV app on your phone (available for iOS and Android). The app includes a remote control that can adjust Fire Stick functions. However, the mobile app does not control TV volume — it only controls the Fire Stick itself. For TV volume, you will still need either your TV's original remote or a remote that has been paired to your TV through the method above.

The mobile app is useful as a backup if you lose the Fire Stick remote, but it does not replace the physical remote for controlling your TV.

Frequently Asked Questions

Can I pair the Fire Stick remote to multiple TVs?

No. The Fire Stick remote can be paired to one TV at a time. If you move the Fire Stick to a different room with a different TV, you will need to repeat the pairing process with the new TV's brand and model. The old pairing will be replaced.

Will the remote control my TV's power button?

The Fire Stick remote can turn your TV on and off if your TV brand supports it and the pairing includes that function. Not all TV brands allow power control through IR. After pairing, try pressing the power button on the Fire Stick remote. If your TV does not respond, your TV model may not support remote power control.

What if I do not know my TV model number?

Check the back, bottom, or side of your TV for a label with the model number. If you cannot find it, search online for your TV brand plus any visible numbers or text on the TV. You can also contact the TV manufacturer's support line with the serial number (also on the label) and they can tell you the model.

Does the Fire Stick remote work with soundbars or external speakers?

The Fire Stick remote is designed to control your TV's volume, not external speakers or soundbars. If your soundbar is connected to your TV via HDMI or optical cable, adjusting the TV volume may also adjust the soundbar volume depending on your setup. For direct soundbar control, you will need the soundbar's original remote or a universal remote programmed for that model.

Can I use a third-party remote instead?

Yes. Universal remotes and some third-party Fire Stick remotes can control both the Fire Stick and your TV. If you prefer a different remote, make sure it is compatible with Fire Stick devices before purchasing. The pairing process may differ from the Fire Stick remote, so check the third-party remote's instructions.