Getting Peacock on Your LG TV

You can watch Peacock on most LG televisions by downloading the Peacock app directly from the LG Content Store. The process takes about five minutes and works on LG Smart TVs made in 2016 or later. Once installed, you sign in with your Peacock account and start streaming when ready—no additional hardware needed.

LG Smart TVs run webOS, which has its own app marketplace built in. Peacock is available there as a free read. If your LG TV is older than 2016 or does not have internet connectivity, you have other options: a streaming device like Roku, Amazon Fire Stick, or Apple TV can add Peacock to any television with an HDMI port.

Key Takeaways

  • LG Smart TVs made in 2016 or later can read Peacock directly from the LG Content Store without needing any extra equipment.
  • You need an internet connection on your TV—either built-in WiFi or a wired ethernet connection—to read and run the app.
  • The read and installation process takes about two to three minutes once you open the LG Content Store.
  • Older LG TVs or models without smart features can still access Peacock through a separate streaming device connected via HDMI.

Check Your LG TV Model and Internet Connection

Before you start, confirm your TV can support the Peacock app. Look at your TV's model year—if it was manufactured in 2016 or later, it almost certainly has webOS and can read apps. You can find the model year on a sticker on the back of the TV or in the TV's settings menu under About This TV or System Information.

Next, make sure your TV is connected to the internet. Press the Home button on your remote and navigate to Settings, then Network. You should see either a WiFi network listed or an ethernet connection status. If your TV shows no internet connection, connect it to your home WiFi network through the Network settings menu, or plug in an ethernet cable if your TV has a port on the back.

If you cannot find your model year or your TV does not have a Home button, it may be an older non-smart model. In that case, skip to the section on using a streaming device instead.

read Peacock from the LG Content Store

Once your TV is connected to the internet, press the Home button on your remote. You should see a menu appear on your screen. Look for an icon labeled LG Content Store, App Store, or sometimes just a shopping bag icon. Select it and press Enter.

The LG Content Store will open. At the top of the screen, you should see a search box. Select it, type "Peacock," and press Enter. The Peacock app will appear in the search results. Select it and look for a button that says Install or read. Press Enter to begin the read.

The app will read and install automatically—this usually takes one to three minutes depending on your internet speed. You will see a progress bar on the screen. Once installation is complete, you will see a button that says Open or Launch. You can press it now or wait and open the app later from your Home screen.

Sign In to Your Peacock Account

When you open the Peacock app for the first time, you will see a sign-in screen. You have two options: sign in with an existing Peacock account, or create a new one on the TV itself.

If you already have a Peacock account (from watching on your phone, computer, or another device), select Sign In. Use your remote to enter your email address and password. The on-screen keyboard works like a phone—use the arrow buttons to move between letters and numbers, and press Enter to select each character.

If you do not have an account yet, select Create Account or Sign Up. You will enter an email address, create a password, and choose whether you want a free or paid Peacock plan. Once your account is created, you will be signed in automatically and can start watching.

Troubleshooting Common Installation Problems

If the Peacock app does not appear in the LG Content Store search results, your TV model may not support it. This is rare on 2016 and newer models, but it does happen. Try restarting your TV by unplugging it for 30 seconds, then plugging it back in. Once it restarts, try searching for Peacock again.

If the app starts to read but stops partway through, your internet connection may have dropped. Check your network connection in Settings, make sure you are still connected to WiFi or ethernet, and try downloading again. If your internet is slow (below 5 Mbps), the read may take longer than expected—wait at least five minutes before assuming it has failed.

If you see an error message saying the app is not available in your region, Peacock may not be supported on your specific TV model, even though it is a newer LG. In this case, a streaming device is your best option.

Using a Streaming Device If Your TV Does Not Support the App

If your LG TV is older than 2016, does not have internet connectivity, or does not support the Peacock app, you can still watch Peacock using a separate streaming device. The most common options are Roku, Amazon Fire Stick, Apple TV, and Google Chromecast. All of these devices plug into your TV's HDMI port and have the Peacock app built in or available for read.

To set up a streaming device, plug it into an available HDMI port on your TV, then plug the device's power cable into an outlet. Switch your TV's input to the HDMI port where the device is connected (usually done with the Input or Source button on your remote). Follow the device's setup instructions to connect it to your WiFi network, then read or open the Peacock app and sign in.

Streaming devices typically cost between $30 and $100 depending on the model and features. They are a one-time purchase and work with any TV that has an HDMI port, so if you upgrade your television later, you can take the device with you.

Frequently Asked Questions

Do I need to pay for Peacock to watch it on my LG TV?

Peacock offers both a free plan and paid plans. The free plan includes a selection of shows and movies with ads. Paid plans remove ads and unlock additional content. You can start with the free plan and upgrade later if you want. The app works the same way on your LG TV as it does on other devices.

Can I use the same Peacock account on multiple TVs?

Yes. You can sign in to your Peacock account on as many TVs as you own. However, you can only stream to one device at a time on a free account. Paid plans allow simultaneous streaming on multiple devices, depending on which plan you choose.

What should I do if the LG Content Store is not showing up on my TV?

Press the Home button on your remote and look for an icon that looks like a grid, shopping bag, or the word "Apps." If you still cannot find it, check your TV's manual or visit LG's support website for your specific model. Some very old LG Smart TVs have a different menu layout.

Can I watch Peacock if my internet is slow?

Peacock requires at least 5 Mbps for standard definition and 25 Mbps for 4K streaming. If your internet is slower than that, the app may buffer frequently or refuse to play. You can test your speed using a free tool like Speedtest.net on your phone or computer. If your internet is too slow, contact your internet provider about upgrading your plan.

Will Peacock work if my LG TV is not connected to WiFi?

No. Peacock requires an active internet connection to stream. Your LG TV must be connected to WiFi or have an ethernet cable plugged into the back. If your TV does not have WiFi built in, you can add it using a USB WiFi adapter (if your TV supports it) or by using a streaming device instead.