Check the LED lights on your camera and charger

The fastest way to know if your GoPro is charging is to look at the LED indicator light on the camera itself. When you plug in a GoPro Hero 11, Hero 10, or Hero 9, a red light should appear on the front or side of the camera within a few seconds. A solid red light means the battery is actively charging. If the light blinks red, the camera is still charging but the battery is low or the charger is working harder than normal.

On older models like the Hero 8 or Hero 7, the LED behavior is slightly different — you may see a white or blue light instead of red, depending on your specific model. Check your camera's manual if you are unsure which color to expect, since the LED location and color vary by generation.

Your charging cable or dock may also have its own indicator light. Most official GoPro chargers show a light when power is flowing through them. If the charger light is on but the camera light is not, the cable may be loose or the charging port may have debris inside.

Key Takeaways

  • A solid red LED light on your GoPro means the battery is charging normally; a blinking red light means it is charging but the battery was very low.
  • Different GoPro models use different LED colors — check your manual to know whether to expect red, white, or blue.
  • If the charger has power but the camera LED does not light up, the charging port may be dirty or the cable connection may be loose.
  • Charging time varies by model and battery size, but most GoPro batteries take two to three hours to charge fully from empty.
  • The camera will continue to work while charging, though the battery will charge more slowly if you are using the camera at the same time.

What the LED light means at each stage

When you first plug in your GoPro, the LED light tells you exactly what is happening inside the battery. A solid red light is the normal charging state — the battery is receiving power and filling up. You can leave the camera plugged in safely; it will not overcharge. A blinking or flashing red light usually means the battery was nearly empty when you started, and the charger is working at full power to refill it. This is normal and not a sign of a problem.

Once the battery is fully charged, the LED light will turn off completely or change color — on some models it turns white or blue. At that point, you can unplug the camera. Leaving a fully charged GoPro plugged in for hours or days will not damage the battery, but it is not necessary.

If the LED light does not turn on at all when you plug in the camera, the problem is usually one of three things: the charging port is blocked by dirt or lint, the cable is not fully inserted, or the cable itself is damaged. Try unplugging, waiting ten seconds, and plugging back in. If the light still does not appear, move to the troubleshooting section below.

Clean the charging port if the light will not turn on

The charging port on a GoPro is small and sits on the bottom or side of the camera, depending on your model. Over time, dust, sand, or lint can collect inside and prevent the charger from making a solid connection. If you plug in your camera and no LED light appears, the port may be blocked.

To clean it safely, use a dry cotton swab or soft brush — the kind you would use to clean electronics. Gently insert the swab into the port and twist it slowly to loosen any debris. Do not use water, compressed air, or metal objects. Once you have cleaned the port, dry it completely and try plugging in the charger again. The LED light should appear within a few seconds.

If the light still does not turn on after cleaning, try a different USB cable or charging dock if you have one available. Sometimes the cable fails before the camera does, and testing with a different one will tell you which part is the problem.

Charging time varies by model and battery type

How long your GoPro takes to charge depends on which model you own and which charger you are using. A Hero 11 with the official dual-battery charger typically takes two to three hours to charge one battery fully from empty. If you are using a basic USB charger or a third-party cable, charging may take longer — sometimes four to five hours.

Charging speed also depends on how much power your charger supplies. Official GoPro chargers are designed for the camera's battery and deliver the right amount of power. A generic phone charger may work, but it often charges more slowly because it supplies less power. Check the wattage on your charger if you have it — higher wattage usually means faster charging.

While your GoPro is charging, you can still use the camera. However, if you turn it on and start recording or taking photos, the battery will charge more slowly because the camera is drawing power at the same time the charger is filling it. For the fastest charge, leave the camera off or in standby mode.

Use the battery percentage on your screen to track progress

Once you know the LED light is on and charging is happening, you can watch the battery percentage on your camera's screen to see how full it is. Turn on your GoPro and look at the battery icon in the top corner — it will show a percentage or a visual bar. As the battery charges, this number will climb.

The battery percentage updates every few seconds, so you can see real-time progress. This is useful if you are in a hurry and need to know whether you have enough charge to film a short clip before you leave. A GoPro battery that reaches 50 percent usually has enough power for 30 to 45 minutes of recording, depending on your settings and which model you own.

If the percentage does not move after five or ten minutes of charging, the LED light may have turned on but the connection is still not solid. Unplug the camera, clean the port again, and try a different cable if you have one.

Test your charger with a different cable or device

If your camera LED light will not turn on even after cleaning the port, the problem may be the cable or charger itself, not the camera. The easiest way to test this is to try a different USB cable if you have one available. Many households have spare phone chargers or cables — try plugging your GoPro into one to see if the LED light appears.

If a different cable works, your original cable is damaged and needs to be replaced. If no cable works, the charging port on the camera may have a deeper problem, or the charger dock itself may be faulty. At that point, contact GoPro support or visit an authorized retailer to have the camera inspected.

You can also test your charger by plugging it into a phone or tablet to see if it delivers power at all. If the charger works with other devices but not your GoPro, the port on the camera is likely the issue. If the charger does not work with anything, it needs to be replaced.

Frequently Asked Questions

Can I use any USB charger with my GoPro?

Most GoPro models will charge with any standard USB charger, but official GoPro chargers deliver power faster and are designed specifically for the battery. Third-party chargers work but may charge more slowly. Avoid very old or low-power chargers, as they may not deliver enough current to charge the battery at all.

What does a blinking red light mean?

A blinking or flashing red light means the battery was very low when you plugged it in, and the charger is working at full power to refill it. This is normal and not a sign of damage. The light will become solid once the battery has some charge, and will turn off when fully charged.

How long does a GoPro battery take to charge?

Most GoPro batteries take two to three hours to charge fully with an official charger, starting from completely empty. Charging time increases if you use a slower charger or if the camera is turned on while charging. The exact time depends on your model and charger type.

Is it bad to leave my GoPro plugged in overnight?

No, it is safe to leave your GoPro plugged in after it is fully charged. Modern GoPro batteries have built-in protection that stops them from overcharging. However, it is not necessary to leave it plugged in for extended periods — unplugging it once the LED light turns off will preserve the charger and cable.

Why is my GoPro not charging even though the LED is on?

If the LED light is on but the battery percentage on your screen is not moving, the connection may be loose. Try unplugging and replugging the cable firmly. If the percentage still does not change after ten minutes, clean the charging port with a dry cotton swab and try again with a different cable if you have one available.