Check the LED light on the camera body
The simplest way to know your GoPro is charging is to look at the LED indicator light on the back or side of the camera (the exact location depends on your model). When you plug the camera into power using the USB cable, a red or amber light should appear within a few seconds. This light stays on while the battery is charging and turns off when the battery is fully charged.
Different GoPro models use slightly different colors. On Hero 11, Hero 10, and Hero 9 cameras, the light is red during charging. On older models like the Hero 8 or Hero 7, you may see an amber or orange light instead. The important thing is that the light appears at all — if you plug in the camera and see no light, the charging connection may not be working.
Keep the camera powered off while charging so you can see the indicator clearly. If the camera is on, the screen may be too bright to notice the small LED, or the light may be harder to spot.
Key Takeaways
- A red or amber LED light on the camera body indicates charging is happening; this light turns off when the battery reaches full charge.
- The exact color of the charging light varies by GoPro model, but any light appearing after you plug in the cable means power is flowing to the battery.
- Keep the camera off while charging so you can see the LED indicator without the screen washing it out.
- If no light appears after plugging in, check that the USB cable is fully inserted into both the camera and the power source, and try a different cable if one is available.
- Charging time ranges from about 1.5 to 3 hours depending on the model and whether the camera is on or off during charging.
Look at the battery icon on the screen
If you turn the camera on while it is plugged in, the screen will show a battery icon in the top corner that fills up as the battery charges. The icon usually looks like a small rectangle with a plus sign or lightning bolt next to it, depending on your model. As the battery charges, you will see the bar inside the icon grow from empty to full.
This method is less reliable than watching the LED light because the screen uses power while it is on, which slows down charging. However, it does let you see exactly how much charge the battery has at any moment. If you need to know the percentage, you can swipe down from the top of the screen to see the full battery percentage on most models.
Verify the USB cable and power source are working
If you plug in your GoPro and see no LED light, the problem is usually a loose connection or a cable that is not working. First, unplug the cable and look at both ends — the connector that goes into the camera and the end that goes into the wall or computer. Make sure there is no dirt, lint, or damage on either connector.
Push the cable firmly into the camera port until you feel it seat completely. The connection should be snug. Then plug the other end into a power source you know is working — a wall outlet with another device, or a computer USB port. Wait 5 to 10 seconds and check for the LED light again.
If the light still does not appear, try a different USB cable if you have one. The original cable that came with your GoPro is usually the most reliable, but any USB-C or micro-USB cable (depending on your model) that is in good condition should work. If a different cable makes the light appear, your original cable may be damaged.
Know how long a full charge takes
Knowing how long charging should take helps you spot problems early. A full charge on most current GoPro models takes between 1.5 and 3 hours, depending on the model and whether the camera is on or off. If you plug in your camera and the LED light is on, but the light does not turn off after 4 or 5 hours, something may be wrong with the battery or the charging circuit.
Charging is faster when the camera is off. If you leave the camera on while charging, it may take closer to 3 hours because the screen and processor are using power at the same time the battery is being charged. For the quickest charge, power off the camera before you plug it in.
Understand what happens when the battery is fully charged
Once the battery reaches 100 percent, the LED light will turn off completely. At this point, you can unplug the camera. Leaving the camera plugged in after it is fully charged does not damage the battery on modern GoPro models — the charging circuit stops delivering power once the battery is full — but there is no reason to leave it connected.
If you are charging overnight or for an extended period, it is fine to leave the camera plugged in. However, if the LED light never turns off after several hours, unplug the camera and try again with a different cable or power source. A light that stays on indefinitely suggests a charging problem that needs troubleshooting.
Troubleshoot when the camera will not charge
If you have checked the cable connection and tried a different cable but the LED light still does not appear, try these steps in order. First, clean the charging port on the camera with a dry cotton swab or soft brush. Dust and salt water (if you use your GoPro near the ocean) can block the connection. Gently insert the swab into the port and rotate it a few times, then blow out any loose debris.
Next, try charging from a different power source. If you were using a computer USB port, try a wall outlet with a USB adapter. If you were using a wall outlet, try a computer. This tells you whether the problem is the power source or the camera itself. A wall outlet with a 2-amp or higher USB adapter charges faster and more reliably than most computer ports.
If the camera still will not charge after cleaning the port and trying multiple power sources and cables, the battery or charging circuit inside the camera may be faulty. At this point, contact GoPro support or visit an authorized retailer for service.
Frequently Asked Questions
What color should the charging light be on my GoPro?
Most current GoPro models show a red light while charging. Older models like the Hero 8 or Hero 7 may show amber or orange instead. The exact color depends on your model, but any light appearing after you plug in the cable means charging is active. The light turns off when the battery is fully charged.
Can I use my GoPro while it is charging?
Yes, you can turn on the camera and use it while it is plugged in. However, charging will be slower because the screen and processor are drawing power at the same time. For the fastest charge, power off the camera before plugging it in.
How do I know if my charging cable is broken?
If you plug in the camera and no LED light appears after 10 seconds, try a different cable. If the light appears with the new cable, your original cable is likely damaged. You can also test the cable by plugging it into another device that uses the same connector type to see if it charges that device.
Is it bad to leave my GoPro plugged in overnight?
No, it is safe to leave your GoPro plugged in after it is fully charged. The charging circuit stops delivering power once the battery reaches 100 percent, so overcharging is not a risk. However, if the LED light is still on after 4 or 5 hours, unplug the camera and troubleshoot the connection.
Why is my GoPro charging light on but the battery percentage is not going up?
This usually means the connection is loose or the cable is partially damaged. Unplug the camera, wait 10 seconds, and plug it back in firmly. Make sure the cable is fully seated in the port. If the battery percentage still does not increase after a few minutes, try a different cable or power source.