The fastest way to power down your GoPro
Press and hold the power button for three seconds until the screen goes black and you hear a beep or feel a vibration. The power button is on the top or side of your camera depending on the model — on most recent GoPros it's the button closest to the shutter. The camera will shut down completely within a second or two.
If your GoPro is in standby mode (screen off but still drawing power), holding the power button for three seconds will turn it fully off. If the camera is actively recording or in use, the same three-second hold will stop what it's doing and power down.
Some older GoPro models use a two-second hold instead of three seconds. If three seconds doesn't work, try holding for two. You'll know it worked when the LED indicator light on the back goes dark.
Key Takeaways
- Hold the power button for three seconds until the screen blacks out and you hear a beep or vibration.
- The power button location varies by model but is usually on the top or side of the camera near the shutter.
- Turning off your GoPro stops recording and prevents battery drain when the camera is not in use.
- If the camera is frozen or unresponsive, remove the battery for 30 seconds and reinsert it to force a shutdown.
Where the power button is on different GoPro models
On GoPro Hero 11, 12, and newer models, the power button is on the top of the camera, directly above the shutter button. It's a small circular button that clicks when pressed.
On GoPro Hero 9 and Hero 10, the power button is also on the top, in the same position. On GoPro Hero 8 and earlier, the power button is on the side of the camera, usually near the USB port or SD card slot. Check your camera's physical layout if you're unsure — the button will be labeled or have a distinctive shape.
If you can't locate the button by looking, consult the quick-start guide that came with your camera or read the manual from GoPro's support website using your model number.
What happens when you turn off your GoPro
Turning off your GoPro stops the battery from draining. Even when the camera is not recording, it uses power to keep the screen lit, maintain the wireless connection, and run the processor. Powering down completely saves battery life, especially if you're not using the camera for several hours or days.
When you turn the camera back on, it will resume from where you left off — your settings, video resolution, frame rate, and other preferences stay saved. You won't lose any footage or configuration.
If your GoPro is mounted on a helmet or vehicle and you want to prevent accidental button presses, turning it off is safer than leaving it in standby mode, where a bump could start recording without you knowing.
Standby mode versus full shutdown
Standby mode is when the screen is off but the camera is still powered on and listening for commands. You can wake it by pressing the power button once. Standby uses less battery than active recording but more than a full shutdown.
Full shutdown is what you get when you hold the power button for three seconds. The camera is completely off and uses almost no battery. To turn it back on, you'll press the power button again for one second.
Use standby if you plan to use the camera again within an hour or two. Use full shutdown if you're storing the camera for a day or longer, or if you want to preserve battery for an upcoming shoot.
If your GoPro won't turn off
If the power button doesn't respond or the camera is frozen, remove the battery. Open the battery door on the back or bottom of the camera (depending on your model), slide the battery out, and wait 30 seconds. Reinsert the battery and close the door. This forces a hard reset and will power the camera down.
If the camera still won't respond after a hard reset, the battery may be completely drained. Plug the camera into a USB charger using the cable that came with it, or use a compatible USB-C or micro-USB cable depending on your model. Let it charge for at least 15 minutes before trying to power it on again.
If the camera powers on but the screen remains unresponsive or frozen, try holding the power button for five seconds instead of three. Some models require a longer hold to force a shutdown when the system is stuck.
Battery care when your GoPro is off
Turning off your GoPro is the best way to preserve battery life during storage. A fully charged GoPro will lose about 3 to 5 percent of its charge per month when powered off, depending on temperature and humidity.
If you plan to store your camera for more than a month, remove the battery and store it separately in a cool, dry place. Batteries stored inside a powered-off camera will drain faster than batteries stored outside the camera.
Before storing your GoPro for an extended period, charge the battery to about 50 percent rather than 100 percent. This reduces stress on the battery chemistry and extends its lifespan over time.
Frequently Asked Questions
Does turning off my GoPro erase my videos?
No. Turning off your camera does not delete any footage or photos. All your files remain on the SD card. The only way to lose footage is to manually delete it through the camera menu or by formatting the SD card.
How long does it take to turn a GoPro back on?
About two to three seconds. Press the power button once and the camera will boot up, display the GoPro logo, and be ready to use. If you're using an older model, it may take up to five seconds.
Can I turn off my GoPro while it's recording?
Yes. Holding the power button for three seconds will stop the recording and shut down the camera. The video file will be saved automatically. You won't lose the footage you recorded before powering off.
What's the difference between turning off and removing the battery?
Turning off the camera using the power button is the normal way to shut it down — the system closes files properly and prepares for the next startup. Removing the battery is a forced shutdown and should only be used if the camera is frozen or unresponsive. Removing the battery repeatedly can cause file corruption over time.
Will my GoPro turn off automatically if I don't use it?
Some newer GoPro models have an auto-off feature that powers down the camera after 5 or 10 minutes of inactivity. Check your camera settings to see if this option is enabled. You can usually adjust the timeout duration or turn it off entirely if you prefer manual control.