The power button is on the side of your camera and works differently depending on your model

Most GoPro cameras power off by pressing and holding the power button for about three seconds until the screen goes dark or you see a power-down animation. On newer models like the Hero 11 and Hero 12, the power button is a small circular button on the side of the camera — usually the left side when you're looking at the screen. On older models like the Hero 9 and Hero 10, it's in the same location but the timing and feedback may vary slightly.

The camera will beep or vibrate to confirm it's shutting down. If you're using a GoPro with a removable battery, you can also power it off by removing the battery entirely, though this isn't the recommended method for regular shutdown.

Key Takeaways

  • Press and hold the power button on the side of your GoPro for about three seconds until the screen goes dark.
  • You'll hear a beep or feel a vibration confirming the camera has powered down.
  • Different GoPro models may have slightly different button locations, so check your manual if you can't find the power button.
  • Removing the battery also turns off the camera, but holding the power button is the proper shutdown method.
  • If your camera won't turn off, try removing the battery for 30 seconds and reinserting it to reset the system.

Where the power button is located on different GoPro models

On Hero 11, Hero 12, and Hero 13 models, the power button is a small circular button on the left side of the camera body when the screen faces you. It's typically located near the bottom-left corner. Press it once to turn the camera on, and hold it for three seconds to turn it off.

On Hero 9 and Hero 10 models, the power button is also on the left side but positioned slightly higher up on the camera body. The same three-second hold rule applies. If you're using an older model like the Hero 8 or earlier, the power button may be on the top of the camera instead — consult your user manual if you're unsure.

GoPro Max cameras have the power button on the side as well, but the exact position differs from the standard Hero line. If you can't locate it when ready, look for a small circular or oval button on the camera's exterior.

What happens when you hold the power button

When you press and hold the power button, the camera begins a shutdown sequence. You'll typically see the GoPro logo appear on the screen, followed by the display going black. At the same time, the camera will emit a short beep or series of beeps, and if your camera has a vibration motor, you may feel a brief vibration.

This shutdown process usually takes two to five seconds total. Once the screen is completely dark and the beeping stops, the camera is off. The LED indicator light on the back or side of the camera will also turn off, confirming the shutdown is complete.

If your GoPro won't turn off using the power button

If holding the power button doesn't work, the camera may be frozen or unresponsive. The first step is to remove the battery for 30 seconds, then reinsert it. This performs a hard reset and often clears whatever is causing the camera to be unresponsive.

If you're using a GoPro with a built-in battery that can't be removed, try connecting it to a computer or charger and let it sit for a few minutes. Sometimes a low battery can cause the camera to behave unexpectedly. After charging for 10 to 15 minutes, try the power button again.

If the camera still won't respond, you may need to perform a factory reset through the camera's settings menu if you can access it, or contact GoPro support for further troubleshooting. Holding the power button longer — up to 10 seconds — sometimes works on stubborn devices.

Putting your GoPro into standby mode instead of full shutdown

Some GoPro models have a standby or sleep mode that uses less battery than being fully powered on but keeps the camera ready to record faster than a complete shutdown. To enter standby, press the power button once (not held) on most models. The screen will dim or turn off, but the camera remains partially active.

Standby mode is useful if you're taking a break between recording sessions and want to preserve battery without fully powering down. To wake the camera from standby, press the power button again. This is faster than powering the camera on from a complete shutdown.

Check your specific model's manual to confirm whether standby mode is available, as not all GoPro cameras have this feature.

Battery considerations when powering off your GoPro

Turning off your GoPro properly extends battery life, especially if you won't be using it for several hours or days. A powered-off camera draws almost no battery, whereas a camera in standby mode or accidentally left on will drain the battery slowly.

If you're storing your GoPro for an extended period — more than a few weeks — it's a good idea to power it off completely and remove the battery if possible. Store the battery separately in a cool, dry place. This prevents the battery from draining completely, which can damage it permanently.

Before your next use, reinsert the battery and charge it fully before powering on the camera. This ensures the battery is in good condition and ready for recording.

Frequently Asked Questions

How long does it take for a GoPro to turn off after I press the power button?

The shutdown process usually takes two to five seconds from the moment you start holding the power button. You'll see the screen go dark and hear a beep confirming the camera is off. If it takes longer than 10 seconds, the camera may be frozen and you should try removing the battery.

Can I turn off my GoPro by removing the battery?

Yes, removing the battery will power off the camera when ready. However, using the power button is the recommended method because it allows the camera to shut down cleanly. Removing the battery suddenly can occasionally cause issues with saved files or settings, though this is rare.

What's the difference between turning off my GoPro and putting it in standby mode?

Standby mode keeps the camera partially active and ready to record quickly, but uses some battery power. Full shutdown turns the camera completely off and uses almost no battery. Use standby if you're taking a short break, and full shutdown if you won't use the camera for several hours or longer.

Why is my GoPro power button not working?

The power button may be stuck, dirty, or the camera may be frozen. Try cleaning around the button gently with a dry cloth. If that doesn't work, remove the battery for 30 seconds and reinsert it to reset the system. If the button still doesn't respond, the camera may need service.

Does turning off my GoPro erase any footage?

No, powering off your camera does not erase any footage or settings. All recorded videos and photos remain on the memory card, and your camera settings stay the same. Turning off the camera is completely safe and won't affect your files.