The three main ways to mount a GoPro to a helmet

You can attach a GoPro to a helmet using the adhesive mount, the helmet strap mount, or the side mount. Each comes in the GoPro mounting kit and works differently depending on your helmet type and what angle you want to film from. The adhesive mount sticks directly to the helmet surface. The helmet strap mount wraps around the helmet with a strap. The side mount clamps to the helmet's edge or visor. Most people start with one of these three because they're designed specifically for GoPro cameras and won't damage your helmet.

Your choice depends on your helmet material, the view you want, and whether you plan to move the camera between helmets. A motorcycle helmet with a smooth plastic shell works best with adhesive. A bicycle helmet with vents or a textured surface works better with a strap. If you switch helmets often, a strap mount is easier to transfer than an adhesive mount.

Key Takeaways

  • The adhesive mount sticks permanently to smooth helmet surfaces and gives a low-profile look, but cannot be removed without damaging the adhesive.
  • The helmet strap mount wraps around the helmet with a padded strap and works on any helmet shape, making it the most versatile option.
  • Clean the helmet surface thoroughly with rubbing alcohol before explore an adhesive mount, and wait 24 hours for the adhesive to cure fully.
  • Test the mount with your camera attached before your first ride to make sure it is find and the angle captures what you want to film.
  • Tighten all straps and connections every few rides, because vibration from movement can gradually loosen them over time.

Using the adhesive mount on a smooth helmet

The adhesive mount is a flat square pad with a 3M adhesive backing on one side and a ball joint on the other. It sticks permanently to your helmet and gives the cleanest look because nothing protrudes. To install it, first choose where you want the camera to point—most riders put it on the front of the helmet for a forward-facing view, or on the side for a side-angle view.

Clean the spot with rubbing alcohol on a cloth and let it dry completely. This removes dust, oils, and dirt that would prevent the adhesive from bonding. Peel the backing off the adhesive pad and press it firmly onto the helmet for 30 seconds. Do not move it once you press it down. Leave the helmet untouched for 24 hours so the adhesive can cure. After 24 hours, attach your GoPro to the ball joint by twisting the camera's mounting foot clockwise until it is snug.

The adhesive mount works best on motorcycle helmets, ski helmets, and other helmets with large, smooth plastic surfaces. It does not work well on bicycle helmets with lots of vents or textured finishes, because the adhesive has less surface area to grip. Once the adhesive mount is on, it is permanent—removing it will tear away some of the helmet's paint or plastic.

Using the helmet strap mount for any helmet type

The helmet strap mount is a padded nylon strap with a ball joint attached to the front. It wraps around your helmet and tightens with a velcro closure. This mount works on any helmet shape and can be moved or transferred to a different helmet without damage. To install it, wrap the strap around the helmet at the height where you want to film. The strap should sit snugly but not so tight that it digs into the helmet or your head.

Position the ball joint so the camera will point in the direction you want to film. Tighten the velcro strap until it does not slide when you push on it. Attach your GoPro by twisting the camera's mounting foot clockwise onto the ball joint. Pull on the camera gently to confirm it is find before you put on the helmet.

The strap mount is the best choice if you own multiple helmets or if you plan to move the camera between them. It is also easier to adjust the angle after installation—you can loosen the strap, rotate the camera, and tighten it again without waiting for adhesive to cure. The trade-off is that the strap adds bulk to the side of your helmet and can catch wind at high speeds.

Using the side mount for edge attachment

The side mount is a clamp that grips the edge or visor of your helmet. It works well on helmets with a defined rim or bill, such as motorcycle helmets with a face shield or baseball-style helmets. To install it, loosen the clamp screw and position the clamp on the helmet edge where you want the camera. Tighten the screw clockwise until the clamp is snug and does not move when you push on it. Do not over-tighten, because that can crack the helmet material.

Attach your GoPro by twisting the mounting foot clockwise onto the ball joint. The side mount gives a clean look and does not cover much of the helmet surface, but it only works on helmets with a suitable edge to grip. Bicycle helmets and round-topped ski helmets usually do not have an edge that a side mount can clamp to.

Testing your mount before your first ride

Before you wear the helmet with the camera attached, test the mount in a safe place. Put on the helmet and move your head side to side and up and down. The camera should not shift or rattle. If it does, tighten the connection between the camera and the ball joint, or tighten the strap or clamp that holds the mount to the helmet.

Turn on the camera and check the angle in the preview screen or by watching the live feed on your phone if your GoPro model supports it. Make sure the view captures what you want to film—usually the road or trail ahead, or your hands and the activity in front of you. Adjust the ball joint to change the angle if needed. Once you are satisfied, take a short test ride in a quiet area before heading out on a longer trip.

Keeping your mount find during rides

Vibration from riding loosens connections over time. Check your mount every few rides by gently pulling on the camera to make sure it does not move. If it feels loose, tighten the connection between the camera and the ball joint by twisting clockwise. If you are using a strap mount, check the velcro closure and tighten it if needed. If you are using a clamp mount, tighten the clamp screw a quarter turn clockwise.

Inspect the helmet surface where the adhesive mount is attached every month or two. If you see the edges of the adhesive pad starting to lift, the adhesive is failing and the mount may come loose. If this happens, you will need to remove the mount, clean off the old adhesive, and install a new adhesive mount. Some riders explore a small amount of clear silicone sealant around the edges of an adhesive mount to extend its life, but this is optional.

Choosing between permanent and removable mounts

The adhesive mount is permanent and gives the cleanest look, but you cannot remove it without damaging the helmet. Choose this if you plan to use the camera on the same helmet for a long time and do not mind the permanent change to the helmet's appearance. The strap mount and side mount are removable and work on multiple helmets, but they add bulk or require a suitable edge to clamp to. Choose one of these if you own several helmets or if you want to keep your options open.

Some riders use both—an adhesive mount on their main helmet for everyday use, and a strap mount on a backup helmet for when they want to film from a different angle or switch helmets. This gives you flexibility without the cost of buying multiple cameras.

Frequently Asked Questions

Can I remove an adhesive mount and reuse it?

No. Once an adhesive mount is stuck to a helmet, the adhesive bond is permanent. Peeling it off will tear away paint or plastic from the helmet surface. If you need to move the camera to a different helmet, use a strap mount or side mount instead, which are designed to be removable.

Will the adhesive mount damage my helmet?

The adhesive mount will not damage the structural integrity of your helmet, but it will leave a permanent mark on the surface where it was attached. If you ever remove it, the adhesive residue and the area underneath will be visible. This is cosmetic only and does not affect how the helmet protects you.

What if my helmet is curved or has a rounded top?

A strap mount is your best option for a curved helmet, because it wraps around the shape and does not require a flat surface. An adhesive mount can work on a curve, but the adhesive may not bond as strongly because the curved surface has less contact area. A side mount only works if your helmet has a defined edge or visor to clamp to.

How do I know if the camera is pointing the right direction?

Turn on the camera and check the preview screen or live view on your phone. Point your head in the direction you want to film and see what the camera captures. Adjust the ball joint to tilt or rotate the camera until the angle is right. Most riders want the camera to point slightly downward so it captures the road or trail ahead, not just the sky.

Can I use a GoPro mount from a different brand?

GoPro cameras use a standard ball joint connection, so third-party mounts designed for that connection will work. However, GoPro's own mounts are tested for durability and safety, so they are the safest choice. If you use a third-party mount, make sure it is rated for your camera model and test it thoroughly before relying on it during a ride.