The GoPro Hero 4 charges through a USB cable connected to a wall adapter or computer
The GoPro Hero 4 uses a standard micro-USB port on the side of the camera to charge. You connect a micro-USB cable to this port, then plug the other end into a wall adapter (5V, 1A minimum) or a computer USB port. The camera does not have a separate charging dock — all charging happens through this single cable connection. A full charge from empty takes roughly two to three hours depending on whether you use the camera while charging.
The battery itself stays inside the camera during charging. You do not remove it and place it in a separate charger. This design keeps the setup straightforward but means you cannot charge a spare battery at the same time you are using the camera.
Key Takeaways
- The Hero 4 charges via micro-USB cable plugged into the port on the camera's side, not through a removable battery or dock.
- Use a wall adapter rated for at least 5V and 1A, or plug the cable into any computer USB port.
- A full charge takes two to three hours, or longer if you are recording or viewing footage while the camera charges.
- The camera will power off automatically once the battery reaches full capacity, so you can leave it plugged in without risk of overcharging.
- If you own a second battery, you will need a separate micro-USB charger or computer to charge it while the first battery is in the camera.
What cable and power adapter you need
Any standard micro-USB cable works with the Hero 4. You do not need a GoPro-branded cable — a cable from a phone charger, tablet, or other device will function the same way. The key is that the connector on one end fits the micro-USB port on the camera's side.
For the power source, a wall adapter should output at least 5V and 1A (5 watts). Most phone chargers meet this standard. If you use a lower-power adapter (such as 0.5A), charging will be slower. A computer USB port also works, though older computers with USB 2.0 ports may charge more slowly than USB 3.0 ports.
The Hero 4 does not come with a wall adapter in the box — only a USB cable. If you do not already own a compatible wall adapter, you will need to purchase one separately or use a computer to charge.
Charging times and battery behavior
From a completely empty battery, expect a full charge in two to three hours using a standard 5V/1A wall adapter. If you charge through a computer USB port, especially an older one, the process may take longer — sometimes four hours or more.
The camera will display a charging indicator on the screen or through an LED light while plugged in. Once the battery reaches 100 percent, the Hero 4 powers itself off automatically. This prevents overcharging and protects the battery. You can leave the camera plugged in after it shuts off without damaging the battery.
If you use the camera while it charges — recording video or reviewing footage — the charging process slows significantly because the battery is discharging at the same time it is receiving power. For the fastest charge, power off the camera or let it sit idle while plugged in.
Charging a second battery
The Hero 4 battery is removable, so you can own a spare. However, the camera itself is the only charger included with the device. To charge a second battery while the first one is in the camera, you have two options: use a second micro-USB cable and power source to charge the camera while the spare battery waits, or purchase a standalone micro-USB battery charger designed for GoPro batteries.
A standalone charger is a small device with one or more battery slots and its own micro-USB port. These are sold separately and allow you to charge multiple batteries at once without using the camera. They are useful if you shoot for long periods and need several fully charged batteries on hand.
Troubleshooting slow or failed charging
If the camera charges very slowly or does not charge at all, first check that the micro-USB cable is fully inserted into the port on the camera's side. The connection should be snug. Try a different cable if one is available — a damaged cable is a common cause of charging problems.
Next, test the power source. Plug the cable into a different wall adapter or a different computer USB port. If the camera charges normally with the new power source, the original adapter or port was the problem. Some wall adapters output less than the rated 5V, especially older or damaged ones.
If the camera still does not charge with multiple cables and power sources, the micro-USB port on the camera itself may be damaged. Inspect it for bent pins, debris, or corrosion. A small amount of lint or dust inside the port can block the connection. Gently clean the port with a dry cotton swab if you see debris, but do not force anything into it.
Protecting the battery during storage
If you plan to store the Hero 4 for weeks or months without use, charge the battery to about 50 percent rather than leaving it fully charged or completely empty. A battery stored at full charge degrades faster over time. Partial charge is the middle ground that preserves battery health.
Store the camera in a cool, dry place away from direct sunlight and heat. Extreme temperatures damage lithium batteries. If you remove the battery for storage, keep it in a separate container in the same cool environment.
Frequently Asked Questions
Can I charge the Hero 4 while I am recording?
Yes, you can record while the camera is plugged in. However, charging will be slower because the battery is discharging as you use the camera. For the fastest charge, power off the camera or stop recording and let it sit idle while plugged in.
What happens if I leave the Hero 4 plugged in after it is fully charged?
The camera automatically powers off once the battery reaches 100 percent. It will not overcharge. You can safely leave it plugged in without damaging the battery, though unplugging it after charging is complete is a normal practice.
Do I need a GoPro charger or can I use any micro-USB cable?
Any standard micro-USB cable works. You do not need a GoPro-branded cable. The power adapter should output at least 5V and 1A, but most phone chargers meet this standard.
Why is my Hero 4 charging very slowly?
Slow charging usually means the power adapter is underpowered (less than 1A), the cable is damaged, or the camera is in use while charging. Try a different cable and a higher-power adapter. If you are recording or viewing footage, power off the camera for faster charging.
Can I charge two batteries at the same time?
Not with the camera alone. The Hero 4 only has one micro-USB port. You can purchase a standalone micro-USB battery charger designed for GoPro batteries to charge multiple batteries at once, or use a second cable and power source to charge the camera while a spare battery waits.