Look for the charging indicator light on your GoPro

When you plug your GoPro into power, a small light on the camera body will turn on to show charging status. The exact location and color depend on your model — on newer GoPros like the Hero 11 and Hero 12, this light is usually on the front or side of the camera near the USB port. On older models, it may be on the back or bottom.

A solid red or orange light means the battery is actively charging. A solid green light means the battery is fully charged and the camera is still plugged in. If you see no light at all, the camera either is not receiving power or there is a connection problem with the cable or port.

The light will stay on as long as the camera is plugged in, even after the battery reaches 100 percent. You can unplug the camera at any time once the light turns green — leaving it plugged in longer will not damage the battery.

Key Takeaways

  • A red or orange light means your GoPro is actively charging; a green light means the battery is full.
  • The charging light is located on the front, side, or back of the camera depending on the model.
  • If you see no light, check that the USB cable is fully inserted and the power adapter is plugged into a working outlet.
  • You can safely unplug your GoPro as soon as the light turns green — the battery will not overcharge.
  • Charging time is typically two to three hours for a full battery, depending on the model and power source.

Check the battery percentage on the camera screen

If the charging light is hard to see or you want to confirm the exact battery level, turn on your GoPro and look at the screen or viewfinder. The battery percentage will display in the top corner or bottom corner of the screen, depending on your model and menu settings.

Watch this percentage increase over time while the camera is plugged in. If the number stays the same for several minutes, the camera is not charging — even if the light is on. This usually means the cable is loose, the port is dirty, or the power adapter is not delivering enough current.

Verify the USB cable and power source are working

A common reason a GoPro will not charge is a loose or damaged cable. Unplug the USB cable from both the camera and the power adapter, then plug it back in firmly. You should feel a small click or resistance when the connector seats properly in the port.

Try a different USB cable if you have one available — many charging problems are caused by frayed or broken cables rather than a faulty camera. If you are using a wall outlet, plug in a different device (like a phone) to confirm the outlet itself is working. If you are charging from a computer USB port, try a different port or a powered USB hub instead, because some computer ports do not supply enough power to charge a GoPro quickly.

GoPro cameras charge fastest when plugged into a wall adapter rated for at least 2 amps of current. Charging from a low-power source like an older computer port or a weak phone charger will be much slower and may not charge at all if the camera is in use.

Clean the charging port if the light does not appear

Dirt, sand, or salt water inside the USB port can block the connection and prevent charging. If you have plugged in the cable but see no light and the battery percentage is not rising, the port may be dirty.

Turn off the camera and use a dry cotton swab or a small flashlight to look inside the port. If you see debris, gently wipe the inside of the port with a dry swab — do not use water or liquids. You can also try blowing compressed air into the port from a distance, but avoid touching the metal contacts inside.

After cleaning, plug in the cable again and check for the charging light. If the light still does not appear after cleaning, the port may be damaged and the camera may need service.

Understand charging time and when to expect a full battery

A GoPro battery typically takes two to three hours to charge completely from empty, depending on the model and the power source. Newer models with larger batteries may take closer to three hours, while older models with smaller batteries may charge in two hours or less.

Charging is slower if you are using the camera while it is plugged in — the power goes partly to running the camera and partly to the battery. If you want the fastest charge, turn off the camera before plugging it in. The light will turn green when the battery reaches 100 percent, and you can unplug it at that point.

If you are in a hurry, you can unplug the camera and use it before the battery is completely full. A battery at 80 or 90 percent will still give you plenty of recording time for most situations.

Troubleshoot if your GoPro charges very slowly

If the light is on and the battery is rising, but the charge is moving much slower than usual, the power source is likely too weak. Wall adapters rated for 1 amp or less will charge a GoPro very slowly — sometimes so slowly that the battery level barely moves.

Switch to a higher-power adapter (2 amps or more) or a different outlet to speed up charging. Avoid charging through a computer USB port unless you have no other option, because most computer ports supply only 0.5 amps. If you are charging from a power bank, make sure it is fully charged itself and rated for at least 2 amps output.

Extreme temperatures can also slow charging. If your camera is very cold, let it warm up to room temperature before plugging it in. If it is very hot, let it cool down slightly. Charging in extreme heat or cold can damage the battery over time.

Know the difference between charging and connected mode

When you plug a GoPro into a computer with a USB cable, the camera may enter connected mode instead of charging mode. In this mode, the light may not behave the same way, and the battery may charge very slowly or not at all while the camera is transferring files or being controlled by the computer.

If you want to charge your GoPro, use a wall power adapter instead of a computer. If you must use a computer, disconnect any software that is controlling the camera and let the camera sit idle while plugged in. The charging light should appear once the camera is no longer in active communication with the computer.

Frequently Asked Questions

What color should the charging light be?

A red or orange light means the battery is charging. A green light means the battery is fully charged. If you see no light at all, check that the cable is fully inserted and the power outlet is working.

Can I use my GoPro while it is charging?

Yes, but charging will be much slower because the power is split between running the camera and charging the battery. For the fastest charge, turn off the camera before plugging it in.

How long does a GoPro battery take to charge?

Most GoPro batteries take two to three hours to charge completely from empty, depending on the model and the power adapter. Using a higher-power adapter (2 amps or more) will charge faster than a low-power source.

Why is my GoPro not showing a charging light?

Check that the USB cable is fully inserted into both the camera and the power adapter. Try a different cable or outlet to rule out a faulty cable. If the port looks dirty, gently clean it with a dry cotton swab. If the light still does not appear, the charging port may be damaged.

Is it bad to leave my GoPro plugged in after it is fully charged?

No, it is safe to leave your GoPro plugged in after the light turns green. Modern GoPro batteries have built-in protection against overcharging, so the battery will not be damaged by staying plugged in longer.