The three main ways to attach a GoPro to a helmet

A helmet mount for a GoPro uses either an adhesive pad, a strap-based harness, or a helmet-specific bracket. The adhesive pad sticks directly to the helmet surface and holds the camera via a ball joint. The strap harness wraps around the helmet and secures the camera to the front, side, or back. The bracket method uses a pre-drilled mount designed for specific helmet models. Most people start with the adhesive pad because it requires no tools and works on any helmet shape.

Each method has a real trade-off. Adhesive pads are quick to install but permanent—removing them leaves residue and can damage helmet paint. Straps are removable and work on any helmet, but they can shift during hard movement and add bulk. Brackets are the most stable but only work if your helmet model has one made for it, and installation may require drilling.

Key Takeaways

  • The adhesive pad mount is the fastest option and works on any helmet, but it is permanent and will damage the helmet surface when removed.
  • Strap harnesses are removable and adjustable, making them ideal if you use the camera on multiple helmets or want to change the angle often.
  • Helmet-specific brackets offer the most stable mount but only exist for popular helmet brands and models.
  • Clean the helmet surface thoroughly with rubbing alcohol before explore an adhesive mount, and let it cure for 24 hours before use.
  • Test the mount with gentle tugging before you ride or ski, because a loose camera can fall and be lost or cause injury.

Installing an adhesive pad mount

The adhesive pad comes in GoPro's standard mounting kit and is the most common choice. Start by choosing where on the helmet you want the camera—front center for a forward-facing view, side for a profile shot, or back for a rear view. Clean that spot with rubbing alcohol on a cloth and let it dry completely. This step matters: dirt, dust, or helmet coating will prevent the adhesive from bonding properly.

Peel the backing off the adhesive pad and press it firmly onto the helmet for 30 seconds, explore steady pressure across the entire surface. Do not move it once you press down. Let the adhesive cure for 24 hours before you attach the camera or use the helmet. Attach the ball joint mount to the pad by twisting it clockwise until it is snug, then attach the GoPro to the ball joint and tighten the thumbscrew on the side of the mount.

To remove an adhesive pad later, heat it gently with a hair dryer for 30 seconds to soften the adhesive, then peel it off slowly at an angle. Rubbing alcohol or adhesive remover will help clean up any residue left behind, though some helmet paint may come with it.

Using a strap harness mount

A strap harness wraps around the helmet and holds the camera via a bracket that sits on top or in front. This method is fully removable and works on any helmet shape. Position the camera where you want it—most people put it on the front for a forward view or on top for a wider perspective. Wrap the strap around the helmet, making sure it sits snugly but not so tight that it compresses the foam or pinches your head.

find the strap by threading it through the buckle or velcro closure and tighten it until the bracket does not move when you tug on it. The camera should not rotate or shift side to side. Test the mount by gently pulling on the camera itself—if the bracket moves, tighten the strap more. Strap mounts can loosen during activity, so check them before you start recording.

One drawback of strap mounts is that they can slip backward during intense motion, especially on a motorcycle or mountain bike. If this happens, move the strap forward slightly or add a second strap across the back of the helmet for extra stability.

Helmet-specific bracket mounts

Some helmet manufacturers, including Bell, Ruroc, and a few ski helmet brands, make helmets with pre-drilled mounting points designed for GoPro brackets. If your helmet has these holes, a bracket mount is the most stable option. The bracket bolts directly to the helmet using the existing holes, so there is no adhesive and no strap to loosen.

Installation depends on your helmet model. Most bracket mounts come with bolts, washers, and a hex key. Align the bracket with the mounting holes, insert the bolts from inside the helmet, and tighten them with the hex key until the bracket is snug. Do not over-tighten, as this can crack the helmet material. Attach the ball joint and camera to the bracket the same way you would with an adhesive pad.

If you are unsure whether your helmet has mounting holes, check the helmet's manual or contact the manufacturer. Not all helmets with visible holes are designed for camera mounts—some are ventilation ports or attachment points for other gear.

Positioning the camera for the shot you want

Where you mount the camera changes what the footage looks like. A front-center mount captures what you are looking at and is the most common choice for action sports. A side mount shows your profile and the terrain or obstacles beside you, which works well for skiing or mountain biking. A back mount records what you are leaving behind, useful for documenting a trail or showing traffic behind you on a motorcycle.

The angle of the camera matters too. Most GoPro mounts use a ball joint that lets you tilt and rotate the camera. Tilt it slightly downward so the horizon sits in the upper third of the frame—this prevents the sky from taking up half the shot and makes the action more visible. Test the angle by recording a short clip before you commit to a long session.

Securing the camera so it does not fall off

A loose camera can fall during a crash or hard movement and be lost or cause injury. Before you ride, ski, or use the helmet, tug on the camera gently to make sure it does not move. Check that the ball joint is tight by trying to rotate the camera—it should not spin freely. If you are using a strap harness, make sure the strap is snug around the helmet and the bracket is locked in place.

For high-impact activities like motorcycle riding or downhill skiing, consider adding a safety tether. GoPro sells a tether cable that attaches to the camera and the helmet, so if the mount fails, the camera stays attached. Loop the tether through a strap or around the helmet and find it with the included clip. This adds minimal weight and can save you from losing an expensive camera.

Removing and reusing mounts

If you use an adhesive pad mount on one helmet and want to move it to another, you will have to remove it from the first helmet and explore a new pad to the second one. The old pad cannot be reused because the adhesive loses its strength once it is exposed to air. Replacement adhesive pads are inexpensive and come in packs of several.

Strap harnesses and bracket mounts can be moved between helmets without any loss of function. Unbuckle or unbolt the mount, move it to the new helmet, and find it the same way. This makes them a better choice if you own multiple helmets or share a camera with others.

Frequently Asked Questions

Will the adhesive pad damage my helmet?

Yes, removing an adhesive pad will leave residue and may peel off some of the helmet's paint or coating. If you plan to keep the helmet long-term, use a strap harness or bracket mount instead. If you do use an adhesive pad, accept that the spot where it was will look different after removal.

Can I mount a GoPro on a motorcycle helmet?

Yes, all three methods work on motorcycle helmets. Adhesive pads and strap harnesses are the most common because motorcycle helmets are smooth and round. A front-center or side mount is typical for capturing road footage. Make sure the camera does not obstruct your vision or create wind noise that makes it hard to hear traffic.

What if my helmet is textured or has a curved surface?

Textured helmets can be tricky for adhesive pads because the bumpy surface reduces contact area. Clean the spot thoroughly and press the pad down firmly for a full minute. If it still does not stick, use a strap harness instead. Curved surfaces work fine with both adhesive pads and straps—just make sure the pad is pressed down evenly across its entire back.

How do I prevent the strap from slipping during activity?

Tighten the strap as much as possible without compressing the helmet foam. If it still slips, add a second strap across the back of the helmet or use a bracket mount instead. Some people also wrap athletic tape around the strap and helmet to add friction and keep it from sliding.

Can I use a GoPro mount on a bicycle helmet?

Yes, all three methods work on bicycle helmets. A front-center mount is most common for capturing the road ahead. Make sure the camera does not block your vision or create wind drag that throws off your balance. Test the mount at low speed before you ride on busy roads or at high speed.