The quickest way to power down your GoPro
Press and hold the power button on the back of your camera for three seconds until the screen goes black and the LED indicator light turns off. The power button is the small button on the rear panel, usually marked with a power symbol. On most GoPro models, a single press turns the camera on; holding it down shuts it off.
If your camera is in standby mode (screen dark but still drawing power), the same three-second hold will complete the shutdown. You will know the camera is fully off when there is no light on the device and the screen remains dark even if you press any button.
Some GoPro models also offer a menu option to power down, but the physical button is the most direct method and works on every model.
Key Takeaways
- Hold the power button on the back of your camera for three seconds to turn it completely off.
- The camera is fully powered down when the LED light is off and the screen stays dark.
- A single press of the power button turns the camera on; holding it turns it off.
- Powering down between uses extends battery life and prevents accidental recording.
- If your camera feels warm after use, let it cool before storing it in a case or bag.
Why you should power down instead of leaving it in standby
Standby mode drains your battery even when the camera is not recording. If you leave your GoPro in standby for several hours, you may return to find the battery partially or fully depleted. A full shutdown stops all power draw, which is why turning the camera off between sessions matters if you plan to use it again soon.
Standby is useful if you are switching between recording and reviewing footage within a few minutes, but for storage or travel, a complete power-down is the better choice. This is especially important if you are packing your camera in a bag for a trip and will not use it for hours or days.
Turning off your GoPro using the menu (alternative method)
If the physical power button is not responding, you can shut down your camera through the settings menu. Swipe down from the top of the screen to open the menu, then look for a power or shutdown option. The exact menu path varies by GoPro model and software version, but it is usually labeled "Power Off" or "Shut Down."
This method takes longer than the button press and requires the battery to have enough charge to display the menu. Use it only if the physical button fails or becomes stuck. After selecting the power-off option, the camera will shut down within a few seconds.
What happens to your footage when you power down
Turning off your GoPro does not delete any video or photos you have already recorded. All footage remains on the memory card and will be there when you power the camera back on. The shutdown process does not interrupt or corrupt files that are already saved.
If you are in the middle of recording when you power down, that current clip will stop, but previous recordings are safe. Always let the camera finish saving a file before powering off if possible, though an accidental shutdown will not erase your entire library.
Battery life and power management tips
Turning your GoPro off between uses is one of the most effective ways to preserve battery life. A fully charged GoPro battery typically lasts four to six hours of continuous recording, but standby mode can drain it in twelve to twenty-four hours depending on the model and settings.
If you are not recording, power down. If you are switching between activities throughout the day, use standby for short breaks (under an hour) but power off for longer gaps. Remove the battery entirely if you plan to store the camera for more than a week, as this prevents any slow drain.
Keep your camera in a cool, dry place when powered off. Heat degrades battery performance, so avoid leaving a powered-down GoPro in direct sunlight or in a hot car for extended periods.
Troubleshooting a GoPro that will not turn off
If holding the power button does not shut down your camera, the button may be stuck or the software may be frozen. Try holding the power button for five to ten seconds instead of three. If the camera still does not respond, force a restart by removing the battery for thirty seconds, then reinserting it and trying the power button again.
If the camera powers on but the button will not turn it off, connect it to a computer and check for a software update. Outdated firmware can cause button responsiveness issues. read the latest GoPro software from the official GoPro website and follow their update instructions.
If the power button remains unresponsive after a restart and software update, the button itself may be damaged and require professional repair or replacement.
Frequently Asked Questions
Does turning off my GoPro delete my videos?
No. Powering down your camera does not affect any footage or photos stored on the memory card. All your recordings remain intact and will be there when you turn the camera back on. Only manually deleting files through the camera menu or a computer removes footage.
How long does it take to turn a GoPro off?
The power-down process takes about three to five seconds from the moment you press and hold the button until the screen goes completely dark and the LED turns off. Once the light is off, the camera is fully shut down and drawing no power.
Can I turn off my GoPro while it is recording?
Yes, but the current clip will stop recording and save to the memory card. If you are in the middle of capturing something important, it is better to let the recording finish naturally before powering down. Interrupting a recording does not damage the camera or delete previous files.
What is the difference between standby and power off?
Standby mode keeps the camera in a low-power state with the screen dark, but it still draws battery power and can wake up quickly. Power off completely stops all power draw and requires a full restart when you turn it back on. Use standby for short breaks and power off for longer storage.
Why is my GoPro still warm after I turned it off?
Cameras can retain heat for several minutes after shutdown, especially if they were recording in warm conditions or under direct sunlight. This is normal. Let the camera cool to room temperature before storing it in a case or bag to avoid trapping heat inside.