The simplest way to power down your GoPro

To turn off your GoPro, press and hold the power button (the circular button on the top of the camera) for about three seconds until the screen goes black and you hear a beep or feel a vibration. The camera will shut down completely. On most GoPro models, the power button is the only button you need to use for this task.

If your GoPro is in sleep mode instead of fully powered off, a single short press of the power button will wake it up. Sleep mode uses less battery than recording but more than a complete shutdown, so if you are storing the camera for a while, a full power-down is better for battery life.

Some newer GoPro models have a side-mounted power button instead of a top-mounted one, but the hold-for-three-seconds method works the same way. Check your camera's physical layout if you are unsure which button is the power button.

Key Takeaways

  • Press and hold the power button for three seconds to shut down your GoPro completely.
  • A single short press of the power button wakes the camera from sleep mode.
  • Fully powering off uses less battery than sleep mode over long storage periods.
  • The power button location varies by model, but the shutdown method is the same across GoPro cameras.
  • You will see a black screen and hear a beep or vibration when the camera powers down successfully.

What happens when you hold the power button

When you press and hold the power button, the camera begins a shutdown sequence. During this time, the screen may flash or show a shutdown icon before going dark. This sequence typically takes two to four seconds, depending on your model and whether the camera is actively recording or in standby.

If you release the button too early—before the three-second mark—the camera may not shut down. Instead, it might enter sleep mode or stay powered on. If this happens, straightforward press and hold again until you see the screen go completely black.

Once the camera is off, the LED indicator light on the front or back of the camera will stop blinking. This visual confirmation tells you the shutdown was successful.

Differences between power-off and sleep mode

Sleep mode is a low-power state where the camera is still technically on but not recording or displaying anything on screen. It activates automatically after a period of inactivity (usually 5 to 10 minutes, depending on your settings). A single press of the power button wakes the camera from sleep in about one second.

Full power-off completely shuts down the camera. The startup time is longer—usually 2 to 3 seconds—but battery drain is minimal. If you are not using the camera for several hours or days, a full shutdown preserves battery much better than sleep mode.

You can also adjust sleep mode timing in your camera's settings menu. Some users disable sleep mode entirely and prefer to manually power off when they are done recording.

Powering off while the camera is recording

If you press the power button while the camera is actively recording video, the recording will stop first, and then the camera will power down. The footage you recorded is automatically saved to the memory card before shutdown occurs, so you will not lose any video.

This is different from straightforward removing the battery or memory card, which can corrupt files. Always use the power button to shut down properly, even if you are in the middle of recording.

Battery considerations when powering off

Turning off your GoPro is the best way to preserve battery life during storage. A fully powered-off camera loses almost no charge over weeks of sitting unused, while a camera in sleep mode will slowly drain its battery over time.

If you plan to store your GoPro for more than a few days, power it off completely and remove the battery if possible. Store the battery separately in a cool, dry place. This prevents both the camera and battery from losing charge during storage.

When you are ready to use the camera again, insert the battery and press the power button once to turn it on. The startup sequence takes a few seconds, and then the camera is ready to record.

Troubleshooting when the power button does not work

If the power button does not respond after several presses, the battery may be completely drained. Connect the camera to a charger using the USB cable that came with it, and wait at least 15 minutes before trying the power button again. A completely dead battery sometimes needs time to accept a charge before the camera will respond.

If the camera still does not power on after charging, try a hard reset by holding the power button for 10 seconds instead of three. Some GoPro models respond to an extended hold when they are frozen or unresponsive. If this does not work, the camera may have a hardware issue that requires professional service.

Dust or debris around the power button can also prevent it from working properly. Use a dry cloth or soft brush to gently clean around the button, and try again.

Frequently Asked Questions

Can I turn off my GoPro while it is charging?

Yes. You can press the power button to shut down the camera even while it is plugged into a charger. The camera will power off, and the charger will continue to charge the battery. When you unplug the camera, it will remain off until you press the power button again.

Does turning off my GoPro delete any footage?

No. Powering off your camera does not delete any video or photos. All footage is saved to the memory card and remains there after shutdown. You can only delete files by using the camera's menu or by connecting the camera to a computer.

How long does it take to turn off a GoPro?

The shutdown process takes about three seconds from the moment you start holding the power button. You will know it is complete when the screen goes black and you hear a beep or vibration.

What is the difference between turning off and removing the battery?

Turning off using the power button allows the camera to save any pending data and shut down safely. Removing the battery without powering off first can corrupt files or damage the camera's memory card. Always use the power button to shut down properly.

Will my GoPro turn off automatically if I do not use it?

Your GoPro will enter sleep mode automatically after a period of inactivity, but it will not power off completely on its own. You must press and hold the power button to fully shut it down. Sleep mode still uses some battery, so manual shutdown is better for long-term storage.