The quickest way to power down your GoPro Hero
Press and hold the power button on the back of the camera for three seconds. The screen will go dark, and the status light on the front will turn off. That is the standard shutdown for every GoPro Hero model.
The power button sits on the back panel, usually near the bottom. On newer models like the Hero 11 and Hero 12, it is the button closest to the battery door. Hold it down until you see the camera respond — do not tap it once and walk away, because a single tap only puts the camera to sleep, not off.
If your camera is mounted on a helmet or pole and you cannot easily reach the back, you can also power down through the touchscreen menu. Swipe down from the top of the screen, then select the power icon and confirm the shutdown. This takes longer but works just as well.
Key Takeaways
- Hold the power button on the back of the camera for three seconds to turn it completely off.
- A single tap puts the camera to sleep mode, which still drains the battery slowly — you need a full three-second hold to shut it down.
- You can also power down through the touchscreen menu by swiping down and selecting the power icon if the button is hard to reach.
- The status light on the front of the camera will turn off when shutdown is complete, confirming the camera is no longer running.
The difference between sleep mode and full shutdown
A quick tap of the power button puts your GoPro into sleep mode, not off. In sleep mode, the camera stops recording and the screen goes dark, but the processor is still running and the battery is still draining. If you leave it in sleep mode for a few hours, you will come back to a dead battery.
Full shutdown, triggered by the three-second hold, cuts power to almost everything. The battery drains much more slowly — a GoPro Hero left powered off can hold a charge for weeks. If you are not using the camera for more than a day or two, always do the full shutdown.
You can tell the difference by the status light. In sleep mode, the light may blink or glow faintly. When the camera is fully off, the light is completely dark and does not respond to movement or button presses.
What happens if you just remove the battery
Pulling the battery out works as a shutdown method, but it is not the best practice. GoPro cameras write data to the memory card when they power down normally, and yanking the battery can interrupt that process. You risk corrupting video files or losing the last few seconds of footage.
Remove the battery only if the camera is frozen and will not respond to the power button. In that case, take the battery out, wait 10 seconds, and put it back in. Then use the normal three-second power button hold to shut down properly.
Turning off the camera when it is recording
If your GoPro is actively recording, pressing the power button will not shut it down when ready. The camera will stop the recording first, save the file, and then power off. This usually takes two to five seconds depending on the video resolution and frame rate.
Do not interrupt this process by removing the battery or pulling the memory card. Let the camera finish saving. If you force a shutdown during a save, you will lose that video file entirely.
Powering down before long storage
Before storing your GoPro for weeks or months, do a full shutdown and remove the battery if you plan to leave it unplugged. A battery left inside a powered-off camera will still lose charge over time, though much slower than in sleep mode. Removing it prevents the battery from draining completely, which can damage the cell.
Store the battery separately in a cool, dry place. If you leave the battery in the camera, the camera should be fully powered off, not in sleep mode. Check the status light one more time to confirm it is completely dark before you put the camera away.
Restarting after a full shutdown
To turn the camera back on, press the power button once and release it. The status light will flash, the screen will light up, and the camera will boot in about three seconds. If the camera does not respond, the battery may be dead — plug it into a USB charger and wait 15 minutes before trying again.
If you powered down the camera while it was recording, it will resume in standby mode, ready to record again. You do not need to reset any settings or menus.
Frequently Asked Questions
Will my GoPro turn off automatically if I do not use it?
Most GoPro Hero models have an auto-off feature that powers down the camera after 5 to 30 minutes of inactivity, depending on your settings. You can adjust this in the camera menu under Power settings. However, relying on auto-off is not ideal for long storage — do a manual shutdown instead.
Can I turn off the camera while it is connected to my phone?
Yes. Powering off the camera does not affect the Bluetooth connection to your phone until the camera is fully shut down. Once the camera is off, the app will show it as disconnected. You can turn the camera back on anytime and reconnect.
What if the power button is stuck or not working?
Try the touchscreen menu shutdown instead. Swipe down from the top and select the power icon. If the screen is also unresponsive, remove the battery for 10 seconds and reinsert it. If the button still does not work after that, the camera may need service.
Does turning off the camera erase any footage?
No. Powering off the camera does not delete videos or photos. All footage stays on the memory card until you manually delete it or format the card. Shutdown only stops the camera from running.