The simplest way to power down your GoPro
To turn off your GoPro, press and hold the power button (the circular button on the top of the camera) for about three seconds until the screen goes black and the LED indicator light turns off. The power button is the most direct way to shut down the camera, and it works the same way across all current GoPro models—Hero 11, Hero 10, Hero 9, and earlier versions.
If your GoPro is in standby mode (screen off but still drawing power), a short press of the power button will wake it. A long press from standby will power it down completely. This distinction matters because standby still drains the battery, though much more slowly than when the camera is recording or actively in use.
Some GoPro models also have a side power switch that lets you toggle between on and off without using the button. If your camera has this physical switch, you can slide it to the off position instead of holding the button. Check your camera's manual to see which design yours has.
Key Takeaways
- Press and hold the power button on top of the camera for three seconds to turn it off completely.
- A short press wakes the camera from standby; a long press powers it down from any state.
- Some GoPro models have a physical side switch instead of or in addition to the power button.
- Standby mode keeps the camera powered but uses much less battery than recording or live view.
- Always power down your GoPro before storing it for extended periods to preserve battery health.
Why your GoPro might not turn off
If you hold the power button and nothing happens, the battery may be completely drained. Plug the camera into a USB charger using the included cable and wait a few minutes—the LED light should blink to show it is charging. Once it has some power, the button should respond again.
If the camera is frozen or unresponsive even after charging, try a force restart. With the camera powered on, hold the power button for ten to fifteen seconds (longer than the normal shutdown). This forces the system to reboot rather than straightforward turning off. After the restart, you can power down normally.
Occasionally, a software glitch can lock the camera in a state where the button does not work. If force restart does not help, connect the camera to a computer via USB and check the GoPro app or website for a firmware update. Updating the firmware sometimes clears stuck states.
Standby mode versus full shutdown
Your GoPro has two low-power states, and understanding the difference helps you manage battery life. Standby mode turns off the screen and stops recording, but the camera stays powered and ready to wake when ready with a button press. This uses about 5 to 10 percent of the battery per hour, depending on the model.
Full shutdown powers down the entire camera—the screen stays dark, the LED is off, and no power is drawn except a tiny trickle to keep the clock running. A fully powered-off camera can sit for weeks without losing significant charge.
If you are taking a break between shots and plan to record again within an hour or two, standby is convenient. If you are packing the camera away for a trip or storage, full shutdown is the right choice. For storage longer than a few weeks, some users recommend charging the battery to about 50 percent before powering down, as this is gentler on lithium-ion battery chemistry over time.
Turning off the camera while it is recording
If your GoPro is actively recording and you press the power button, the camera will stop recording first, save the file, and then power down. This takes a few seconds. Do not unplug the camera or remove the battery while this is happening, as it can corrupt the video file.
If you want to stop recording without powering down the camera, press the shutter button (the larger button on the front or side, depending on your model) instead. This stops the recording and returns the camera to standby, ready for the next shot.
Powering down before removing the battery or memory card
Always turn off your GoPro fully before removing the battery or memory card. Removing either component while the camera is powered on or in standby can cause file corruption or damage to the card's file system. Power down, wait for all lights to go dark, and then open the side panel to access the battery or card slot.
If you are swapping batteries in the field, power down the first camera, swap the battery, and then power on the fresh one. This takes only a minute and protects your footage. The same rule applies to memory cards—always shut down before ejecting.
Auto-off settings to save battery automatically
Most GoPro models have an auto-off timer in the settings menu that powers down the camera automatically if it sits idle for a set period. Common options are 5 minutes, 15 minutes, 30 minutes, or never. This feature is useful if you tend to forget to power down manually, as it prevents the battery from draining overnight.
To find this setting, open the camera's menu (usually by pressing the mode or settings button), navigate to Preferences or System Settings, and look for an option called "Auto Off" or "Auto Power Off." Set it to a time that matches your shooting style. If you are doing long sessions with breaks, 15 or 30 minutes is a good middle ground.
Keep in mind that auto-off only works if the camera is not actively recording or connected to the GoPro app. If the app is open on your phone, the camera will stay powered to maintain the connection.
Frequently Asked Questions
Does holding the power button longer damage the camera?
No. Holding the power button for longer than three seconds straightforward keeps the shutdown command active. Once the camera powers down, holding the button longer has no additional effect. You can safely hold it for five or ten seconds without harm.
Can I turn off the camera using the GoPro app on my phone?
No, the GoPro app does not have a remote power-off function. You must use the physical power button on the camera itself. The app can control recording and settings, but powering down requires the button.
What happens if I remove the battery without powering down first?
Removing the battery while the camera is powered on or in standby can corrupt video files or damage the memory card's file system. Always power down fully, wait for the lights to go dark, and then remove the battery.
Is it bad to leave my GoPro in standby mode overnight?
Standby mode draws power continuously, so the battery will drain significantly overnight. For storage longer than a few hours, full shutdown is better. If you plan to use the camera again soon, standby is fine, but overnight storage should be a powered-off state.
Why does my GoPro turn back on by itself after I power it down?
This usually happens if the power button is stuck or if something is pressing it in the camera bag or case. Check that the button moves freely and is not jammed. If it keeps happening, the button mechanism may need service from GoPro support.