The simplest way to power down your GoPro Hero 5
Press and hold the power button on the back of the camera for three seconds. The screen will go dark, and the camera will shut down completely. The power button is the small rectangular button on the rear panel, just above the battery door. You do not need to hold it longer than three seconds — the camera will power off after that time.
If you are using the camera with the LCD screen open, the button is easier to reach. If the screen is closed, you may need to angle your hand slightly to press it. Either way, the action is the same: hold for three seconds and release.
Key Takeaways
- Hold the power button on the back of the camera for three seconds to turn it off completely.
- The power button sits just above the battery door on the rear panel.
- You can power off the camera whether the LCD screen is open or closed.
- If the camera does not respond to the power button, remove the battery for 30 seconds and reinsert it to reset the device.
- Turning off the camera instead of letting the battery drain extends battery life over time.
What happens when you hold the power button
When you press and hold the power button, the Hero 5 stops recording when ready if a video is active. The camera then saves any footage that was being recorded and closes all open processes. After three seconds, the display goes black and the camera enters a powered-down state.
During shutdown, the camera does not delete any files or settings. Your videos, photos, and preferences remain stored on the memory card and in the camera's internal memory. The next time you power on, the camera will start up with all your previous settings intact.
Difference between power off and sleep mode
The Hero 5 does not have a dedicated sleep mode like some cameras do. When you turn off the camera using the power button, it shuts down completely rather than entering a low-power standby state. This means the battery will not drain while the camera is off, but it also means you cannot wake the camera with a quick button press — you must hold the power button again to turn it back on.
Some users prefer this design because it prevents accidental battery drain during storage or transport. If you plan to use the camera again within a few minutes, you may want to leave it powered on instead of shutting it down completely.
When the power button does not work
If you hold the power button for three seconds and nothing happens, the camera may be frozen or the battery may be completely drained. Try removing the battery from the camera and waiting 30 seconds before reinserting it. This action resets the camera's internal systems and often restores normal function.
If the camera still does not respond after a reset, plug it into a USB charger and let it charge for at least 30 minutes. A completely dead battery may not show any signs of life until it has received some charge. Once the battery has power, try the power button again.
Powering off during video or photo capture
If you press the power button while the camera is actively recording video, the Hero 5 will stop recording and save the file before shutting down. You do not lose the footage you have already captured. The camera prioritizes saving your content before powering off.
The same applies if you are in photo mode or any other shooting mode. Pressing the power button always saves your work first, then powers down the device. This design prevents accidental loss of media.
Battery life and power management
Turning off your Hero 5 when you are not using it extends the overall lifespan of the battery. Even when powered off, the battery will lose charge very slowly over weeks or months, but this drain is minimal compared to leaving the camera on. If you plan to store the camera for more than a few days, powering it off is the best practice.
The Hero 5 battery typically holds a charge for several weeks when the camera is completely powered down. If you store the camera for several months, you may want to charge it every few months to keep the battery healthy, even if you are not using the camera.
Frequently Asked Questions
How long does it take for the Hero 5 to power off after I press the button?
The camera powers off within three seconds of holding the button. The screen goes dark almost when ready, and the camera is fully shut down by the time you release the button. There is no additional waiting period after the screen goes dark.
Will my videos be saved if I turn off the camera while recording?
Yes. The Hero 5 automatically saves any video that was being recorded before it powers off. You will not lose footage. The camera completes the save process before the shutdown is complete.
Can I turn off the camera using the remote or the GoPro app?
No. The Hero 5 can only be powered off using the physical power button on the back of the camera. The remote and the app do not have a power-off function. You must use the button directly.
What should I do if the camera is frozen and the power button does not work?
Remove the battery from the camera, wait 30 seconds, and reinsert it. This resets the camera's systems. If the camera still does not respond, charge it for at least 30 minutes using a USB cable, then try the power button again.
Does turning off the camera save battery compared to letting it run until the battery dies?
Yes. Powering off the camera when you are done using it prevents unnecessary battery drain. A powered-off camera loses charge very slowly over weeks, while a powered-on camera will drain the battery in hours even if you are not recording.