Press and hold the power button on the back of the camera
The power button on a GoPro Hero 5 is a small circular button on the back of the camera, near the bottom. Press and hold it for about three seconds until you see the GoPro logo appear on the screen and hear a startup sound. The camera will then boot up and show you the main menu.
If the camera does not respond, the battery may be empty. Plug the camera into a USB charger using the included cable and wait at least 30 minutes before trying again. A completely drained battery sometimes needs time to accept a charge before the camera will power on.
Key Takeaways
- The power button is a small circular button on the back of the camera near the bottom; hold it for three seconds to turn on the Hero 5.
- You will see the GoPro logo and hear a startup sound when the camera is powering on correctly.
- If the camera does not turn on, charge the battery for at least 30 minutes using the included USB cable.
- Once powered on, the camera enters standby mode and is ready to record or adjust settings through the touchscreen menu.
What happens after the camera powers on
After the startup sound plays, the Hero 5 will display the main menu on its touchscreen. The camera is now in standby mode and ready to use. You can navigate the menu by tapping the screen to access recording modes, settings, and playback of recorded footage.
The camera will automatically turn off after about five minutes of inactivity if you do not press any buttons or touch the screen. This is a battery-saving feature. If you want to keep the camera on longer without using it, you can disable this auto-off timer in the settings menu under Preferences.
Charging the battery before first use
If you are using the Hero 5 for the first time, charge the battery fully before turning it on. Connect the camera to a USB power source using the included USB-C cable. The charging port is on the side of the camera. A full charge typically takes about two hours.
While charging, you may see a charging indicator on the screen or a light on the camera body, depending on whether the camera is powered on. Once the battery reaches 100 percent, you can unplug the camera and power it on using the back button.
Troubleshooting when the camera won't turn on
If you press and hold the power button and nothing happens, try these steps in order. First, make sure the battery is not completely dead by charging for at least 30 minutes. Second, try a hard reset by holding the power button for 10 seconds instead of three. Third, check that you are pressing the correct button — the power button is circular and located on the back, not the mode button on the side.
If the camera still does not respond after charging and a hard reset, the battery itself may be faulty. Try removing the battery (if your model allows it) and reinserting it firmly to may support a good connection. If you have access to another GoPro Hero 5 battery, test with that battery to confirm whether the problem is the battery or the camera body. If neither works, contact GoPro support for warranty service.
Using the camera once it is powered on
Once the Hero 5 is on and showing the main menu, you can begin recording when ready by pressing the red record button on the front of the camera, or you can tap the screen to enter different modes. The camera defaults to video recording mode, but you can switch to photo, burst, or time-lapse modes from the menu.
The touchscreen is responsive and intuitive. Swipe left or right to move between menu sections, and tap any option to select it. The battery percentage and recording time remaining appear at the top of the screen so you always know how much power and storage space you have left.
Turning the camera off to save battery
To turn off the Hero 5, press and hold the power button on the back for three seconds again. The screen will go dark and the camera will shut down. This stops the battery from draining when you are not using the camera.
If you plan to store the camera for more than a few weeks, power it off completely and remove the battery if possible. Store the battery in a cool, dry place. Lithium batteries drain slowly even when the camera is off, so removing the battery extends its lifespan during long storage periods.
Frequently Asked Questions
Why does my GoPro Hero 5 turn off by itself?
The camera has an automatic shutdown feature that powers it off after five minutes of no activity. This is normal and saves battery life. You can disable this in the settings menu under Preferences if you want the camera to stay on longer without touching it.
Can I turn on the camera while it is charging?
Yes, you can power on the Hero 5 while it is plugged in and charging. The camera will operate normally and the battery will continue to charge at the same time. This is useful if you want to review footage or adjust settings while the battery replenishes.
What should I do if the power button is stuck or not responding?
Try pressing the button firmly several times to see if it unsticks. If the button feels physically stuck, do not force it. Instead, charge the camera and try again after a few hours. If the button remains unresponsive, the camera may need repair and you should contact GoPro support.
How long does the battery last after I turn on the camera?
Battery life depends on what you are doing. In standby mode with the screen on, the battery lasts about one to two hours. During active video recording, expect 60 to 90 minutes of recording time on a full charge, depending on resolution and frame rate settings.