Update Your GoPro Through the Official App
The easiest way to update your GoPro is through the GoPro Quik app on your phone. Connect your camera to the app via Bluetooth, and the app will notify you if a new firmware version is available. Tap the notification or go to Settings > Camera > Firmware Update, then follow the on-screen prompts. The app downloads and installs the update directly to your camera—you don't need a computer.
Make sure your camera battery is at least 50% charged before starting. The update process takes 5 to 15 minutes depending on your internet speed and the size of the update. Do not turn off your camera or disconnect it from your phone until the update finishes. You'll see a progress bar on both your phone and camera screen.
After the update completes, your camera will restart automatically. Once it powers back on, the new firmware is active. You can verify the version by opening the app again and checking Settings > Camera > About.
Key Takeaways
- The GoPro Quik app on your phone is the fastest way to update your camera without needing a computer.
- Your camera battery must be at least 50% charged, and you should not disconnect during the update process.
- Updates typically take 5 to 15 minutes and your camera will restart automatically when finished.
- You can also update through the GoPro website by downloading firmware to a memory card if the app method doesn't work.
- Check your camera's current firmware version in Settings > Camera > About to confirm the update was successful.
Update via USB Cable and Computer
If the app method doesn't work or you prefer using a computer, you can update through the GoPro website. Go to gopro.com/update, select your camera model, and read the latest firmware file. The file is usually a .zip folder—extract it to your computer's desktop.
Insert your GoPro's memory card into a card reader connected to your computer. Create a new folder on the memory card called UPDATE (all capital letters). Copy the extracted firmware files into this UPDATE folder. Eject the card safely, insert it back into your camera, and power on the camera. It will detect the firmware files and begin the update automatically. Do not turn off the camera during this process.
This method works if your phone doesn't have Bluetooth, your app won't connect, or you're updating an older GoPro model. The process takes the same 5 to 15 minutes, and your camera will restart when finished.
Prepare Your Camera Before Updating
Before you start any update, charge your camera to at least 50% battery. A dead battery during an update can corrupt the firmware and leave your camera unable to start. If you're updating through the app, make sure Bluetooth is enabled on both your phone and camera, and that they're within 10 feet of each other.
Remove the memory card if you're updating via USB and computer—this prevents the card from interfering with the firmware installation. Close any other apps on your phone if you're using the app method, as background apps can interrupt the connection.
What to Do If the Update Fails
If the update stops halfway through or your camera freezes, do not panic. First, try a hard reset: hold the power button for 10 seconds until the camera shuts down completely. Wait 30 seconds, then power it back on. If the camera starts normally, try the update again from the beginning.
If the camera won't turn on after a failed update, plug it into a USB charger and let it sit for 15 minutes. This sometimes allows the camera to recover enough to restart. Then try the update one more time using the same method.
If neither of these steps works, the camera may need a factory reset through the GoPro support website, or you may need to contact GoPro support directly. Keep your camera plugged in while troubleshooting—never let the battery drain completely during recovery.
Check Your Current Firmware Version
Before updating, you should know what version your camera is currently running. On your camera, go to Settings > Camera > About. The firmware version appears as a number like "H23.01.02.00"—the first two digits indicate the major version.
You can also check the version through the GoPro Quik app: open Settings > Camera > About. The app will show your current version and tell you whether an update is available. If no update is shown, your camera is already running the latest firmware.
Why You Should Update Your GoPro
Firmware updates fix bugs, improve video quality, add new recording modes, and enhance battery life. For example, recent updates have added better stabilization, faster autofocus, and improved low-light performance on newer models. Updates also patch security issues that could affect how your camera connects to your phone.
You don't need to update when ready after a new version is released, but checking for updates every few months keeps your camera running smoothly. If you notice your camera is slow, crashes during recording, or won't connect to the app, an update often solves the problem.
Frequently Asked Questions
Can I use my GoPro while it's updating?
No. Do not use your camera during an update. The firmware installation requires the camera to be powered on but idle. Using it—recording, changing settings, or turning it off—can corrupt the update and damage the camera's software.
How long does a GoPro firmware update take?
Most updates take 5 to 15 minutes from start to finish. Larger updates or slower internet connections may take up to 20 minutes. The camera will restart automatically when done, so you'll know it's finished when the screen powers back on.
What happens if I disconnect my camera during an update?
Disconnecting during an update can corrupt your camera's firmware and prevent it from starting. If this happens, try a hard reset by holding the power button for 10 seconds, then attempt the update again. If the camera won't start, contact GoPro support.
Do I need WiFi to update my GoPro?
Yes, if you're using the GoPro Quik app. The app needs an internet connection to read the firmware file. If you're updating via USB and computer, you need internet on the computer to read the firmware, but not on the camera itself.
Will updating erase my videos and photos?
No. Firmware updates do not delete your recorded files. Your videos, photos, and settings remain on the memory card. However, it's always a good idea to back up important footage before any major update, just in case.