Getting Your GoPro Hero 3 Ready to Record

The GoPro Hero 3 records video and photos once you charge the battery, insert a memory card, and power it on. The camera has a single power button on the side, a small LCD screen on the back, and a lens on the front. Before your first recording, you need to charge the included lithium battery (this takes about two hours with the USB cable), slide a microSD card into the slot on the right side of the camera, and turn the camera on by pressing the power button once.

The Hero 3 will beep and show the GoPro logo on the back screen when it powers up. The camera defaults to video mode, which is what you want for most recording. If you see a photo icon instead, press the mode button (the small button on top) to switch back to video mode. The back screen will show you the remaining battery life in the top corner and how much space is left on your memory card.

Key Takeaways

  • Charge the battery fully before your first use, and always check that a microSD card is inserted before you start recording.
  • Press the red record button on top of the camera to start and stop video — the red light on the front will blink while recording.
  • The Hero 3 has preset recording modes for different situations: standard video, slow motion, burst photo, and time-lapse, which you change using the mode button.
  • Video files save automatically to your memory card, and you can review them on the back screen by pressing the play button.
  • The camera turns off automatically after three minutes of inactivity to save battery, so press the power button again if the screen goes dark.

Starting and Stopping a Recording

Press the red record button on the top of the camera to begin recording. You will see a red light blinking on the front of the camera, and the back screen will show a timer counting up the seconds of your recording. The audio will record from the built-in microphone on the back of the camera, so keep your hands away from that area if you want clean sound.

To stop recording, press the red record button again. The camera will save the video file to your memory card automatically — you do not need to do anything else. The back screen will return to the live preview, showing what the lens sees. If you want to record another clip right away, just press the red button again.

Switching Between Video Modes

The Hero 3 has four main recording modes that you switch between using the mode button on top of the camera. Press the mode button once to cycle through them: standard video (the default), slow motion, burst photo, and time-lapse. The back screen will show you which mode is active with a small icon in the corner.

Standard video records at 30 frames per second in 1080p resolution, which is the best choice for most situations. Slow motion records at 60 frames per second, so when you play it back at normal speed, the action appears to move half as fast — useful for sports or water activities. Burst photo takes multiple still photos in quick succession when you press the record button, and time-lapse takes one photo every few seconds, which you can later play as a fast-motion video showing clouds moving or a sunset changing color.

Each mode has its own battery drain rate. Slow motion and time-lapse use less battery than standard video, while burst photo uses the most. If your battery is running low, switch to time-lapse mode to extend your recording time.

Adjusting Settings on the Camera

The Hero 3 has a settings menu you reach by pressing the back button (the small button on the back of the camera near the screen). This opens a menu with options for video resolution, frame rate, field of view, and audio. Most of these settings are already optimized for typical use, so you do not need to change them unless you have a specific reason.

The most useful setting to know about is field of view, which controls how wide the lens sees. Wide field of view captures more of the scene around you and is best for action sports or landscapes. Narrow field of view zooms in slightly and is better for distant subjects. You can change this by scrolling through the settings menu with the mode button, then pressing the back button to select. If you are not sure which to use, leave it on wide — it is the default and works well for most recordings.

To exit the settings menu and return to recording, press the power button. The camera will remember your settings the next time you turn it on.

Reviewing and Deleting Videos

Press the play button (the triangle icon on the back of the camera) to enter playback mode. The back screen will show thumbnails of all the videos and photos on your memory card. Use the mode button to scroll left and right through your files, and press the back button to select a file and watch it on the screen.

To delete a video you do not want, select it in playback mode and press the delete button (usually marked with a trash icon). The camera will ask you to confirm the deletion. Press the back button to confirm, and the file will be removed from the memory card. If you delete a file by mistake, there is no undo — the file is gone permanently.

To exit playback mode and return to recording, press the power button. The camera will turn off the screen and go back to live preview.

Charging and Battery Life

The Hero 3 battery lasts about 60 to 90 minutes of continuous recording, depending on which mode you are using and how cold it is outside. Cold temperatures drain the battery faster, so if you are filming in winter, expect shorter recording time. Slow motion and time-lapse modes use less battery than standard video.

Charge the battery by connecting the USB cable to the camera and plugging the other end into a computer or USB power adapter. The camera does not need to be on while charging. A full charge takes about two hours. You can also buy a separate battery and swap it out when the first one runs low — this is faster than waiting for a charge if you are filming all day.

The camera will show a low battery warning on the back screen when you have about 10 minutes of recording time left. At that point, stop recording and charge the battery or swap in a fresh one.

Transferring Videos to Your Computer

Connect the Hero 3 to your computer using the USB cable. The camera will appear as a removable drive on your computer, just like a flash drive. Open the drive and navigate to the DCIM folder, then the 100GOPRO folder inside it. Your video files will be there with names like GH010001.MP4, GH010002.MP4, and so on.

Drag and drop the video files to a folder on your computer to copy them. Once the files are copied, you can delete them from the camera to free up space on the memory card. Do not unplug the USB cable while files are copying — wait until the transfer is complete and the progress bar disappears.

Video files from the Hero 3 are in MP4 format, which works with most video editing software and media players. If you want to edit your videos, you can use free software like Windows Photos (on Windows) or iMovie (on Mac), or more advanced programs like Adobe Premiere or DaVinci Resolve.

Common Issues and Fixes

If the camera will not turn on, the battery may be completely drained. Plug it in to charge for at least 30 minutes, then try again. If the screen is dark but the red light on the front is blinking, the camera is recording — press the red button to stop, then press the power button to turn it off.

If the camera says "No Card" on the back screen, the memory card is not inserted properly. Power off the camera, remove the card from the slot on the right side, and reinsert it firmly until you hear a click. Then power the camera back on. If you see "Card Full" on the screen, your memory card is out of space — delete old videos or transfer them to your computer to make room.

If video files are corrupted or will not play, the memory card may have been removed while the camera was writing to it. Always let the camera finish saving a file before you power it off or remove the card. Use a Class 10 microSD card rated for at least 30 MB/s write speed — cheaper cards can cause recording errors.

Frequently Asked Questions

Can I record audio with the GoPro Hero 3?

Yes, the camera has a built-in microphone on the back that records audio automatically when you press the record button. The audio quality is decent for action footage but not as clear as a dedicated microphone. If you need better sound, you can add an external microphone using an adapter, though the Hero 3 does not have a standard microphone jack.

How long can I record on a single battery charge?

You can record for about 60 to 90 minutes continuously on a full battery, depending on the recording mode and temperature. Slow motion and time-lapse use less battery than standard video. Cold weather reduces battery life significantly, so bring extra batteries if you are filming outdoors in winter.

What size memory card do I need?

A 32 GB microSD card is a good starting point and will hold about 3 to 4 hours of 1080p video. Use a Class 10 card rated for at least 30 MB/s write speed to avoid recording errors. Avoid very cheap cards — they often fail or corrupt files.

Can I use the Hero 3 underwater?

The Hero 3 is waterproof up to 40 meters (130 feet) without any additional housing, so it is safe to use in pools, rivers, and shallow ocean water. For deeper diving or rough water sports, use the optional protective housing that comes with some models.

How do I know if the camera is actually recording?

Look at the front of the camera — a red light will blink steadily while recording. The back screen will also show a timer counting up the seconds. If the red light is not blinking, the camera is not recording, even if you pressed the button.