Getting Started with Your GoPro Hero 4

The GoPro Hero 4 turns on by pressing the power button on the back of the camera for three seconds. The camera will beep and the front LED will light up. Before you record anything, insert a microSD card into the slot on the side — the camera will not save footage without one. A Class 10 card rated for at least 45 Mbps write speed works best; slower cards may drop frames or stop recording mid-clip.

The Hero 4 has two buttons: power on the back and a shutter button on the top. Press shutter once to start recording; press it again to stop. The red recording light on the front tells you when the camera is actively capturing. The back screen shows what the camera sees, battery level, and how much storage space remains.

Battery life depends on resolution and frame rate. At 1080p 30fps, expect roughly 90 minutes per charge. Higher resolutions like 4K drain the battery in about 45 minutes. Charge the camera using the USB cable that comes in the box — plug it into any USB power adapter or computer port.

Key Takeaways

  • Press the power button for three seconds to turn on the camera, and insert a Class 10 microSD card before recording anything.
  • Press the shutter button on top once to start recording and once to stop; the red light on the front shows when the camera is active.
  • Battery life ranges from 45 minutes at 4K resolution to 90 minutes at 1080p, depending on your recording settings.
  • Change resolution and frame rate in the Settings menu by pressing the power button while the camera is on, then scrolling with the shutter button.
  • Playback footage by pressing power while the camera is on, then selecting the play icon; use the shutter button to scroll through clips.

Changing Resolution and Frame Rate

The Hero 4 records in several resolutions: 4K at 15 or 30fps, 2.7K at 30 or 60fps, 1080p at 30, 60, or 120fps, and 720p at 30, 60, or 120fps. Higher resolution uses more battery and storage; higher frame rates let you slow down footage in editing. To change these settings, press the power button while the camera is on — this opens the Settings menu on the back screen.

Use the shutter button to scroll down to "Video Resolution" and press shutter to select it. Scroll through the options and press shutter again to choose one. The same process applies to frame rate: scroll to "Frame Rate," press shutter, and pick your speed. After you change a setting, the camera returns to the main screen. These changes stay in place until you alter them again, so you only need to adjust them once per session.

Lower resolutions and frame rates are useful when storage space is tight or you want longer battery life. For action footage where you might want to slow down a dramatic moment, 60fps or 120fps at 1080p gives you smooth slow-motion without eating as much storage as 4K.

Using the Camera Modes

The Hero 4 has four main modes: Video, Photo, Burst, and Time Lapse. Video is the default — it records continuous footage. Photo takes a single still image each time you press shutter. Burst captures multiple photos in rapid succession (up to 30 per second) with one button press, useful for action shots where you want to pick the sharpest frame later. Time Lapse records one frame at set intervals, so a 30-minute event can play back in seconds.

Switch between modes by pressing power while the camera is on, then scrolling to "Capture Mode" and pressing shutter. Scroll through the four options and press shutter to select. The mode name appears on the back screen so you always know which one is active. Most users stick with Video mode for general action recording and switch to Photo or Burst only when they need stills.

Viewing and Deleting Footage

To watch what you recorded, press the power button while the camera is on. The back screen will show a menu. Scroll down to the play icon (a triangle pointing right) and press shutter. The camera displays your most recent clip. Use the shutter button to scroll left or right through your footage, or press power to go back to the main menu.

To delete a clip while viewing it, press the power button. A menu appears asking whether you want to delete the file. Press shutter to select "Delete" and confirm. Deleted files cannot be recovered, so only remove clips you are certain you do not want. If you want to keep all your footage, connect the camera to a computer using the USB cable and copy the files to your hard drive before formatting the card.

Connecting to Wi-Fi and Using the App

The Hero 4 can connect to the GoPro App on your phone to preview footage and control the camera remotely. To enable Wi-Fi, press power while the camera is on, scroll to "Wireless," and press shutter. Select "GoPro App" and press shutter again. The camera will display a Wi-Fi name and password on the back screen.

On your phone, open the GoPro App, go to Settings, and select your camera model. Choose the Wi-Fi network shown on the camera screen and enter the password. Once connected, the app shows a live preview of what the camera sees. You can start and stop recording, change settings, and read clips to your phone — useful if you want to share footage when ready without waiting to get home.

Wi-Fi drains the battery faster than recording alone, so turn it off when you are done. Return to the Wireless menu and select "Off."

Protecting Your Camera from Water and Damage

The Hero 4 is waterproof to 40 meters (130 feet) without a housing, thanks to its sealed body. The battery door and card slot have rubber gaskets that keep water out as long as they are fully closed. Before any water use, check that both seals sit flush and the latches are tight.

For depths beyond 40 meters or rough conditions like whitewater rafting, use the optional dive housing, which extends waterproof depth to 60 meters. The housing adds bulk but protects the camera from impacts and sand. Always rinse the camera with fresh water after saltwater use to prevent corrosion.

Store the camera in a cool, dry place. Extreme heat can damage the battery; extreme cold slows it down temporarily but does not cause permanent harm. If the camera gets very cold, let it warm to room temperature before charging.

Troubleshooting Common Issues

If the camera will not turn on, the battery may be dead. Connect it to a USB power source for at least 30 minutes, then try again. If the screen is blank during recording, the camera is working — the back screen turns off after a few seconds to save battery. Press any button to wake it.

If the camera stops recording unexpectedly, the microSD card may be full or corrupted. Insert a new card and try again. If the old card still has files you want, connect the camera to a computer and copy them before formatting the card in the camera (not on your computer).

If the Wi-Fi will not connect, restart both the camera and your phone. Make sure you are entering the correct password shown on the camera screen. If problems persist, reset the camera by holding power for 10 seconds until it shuts down, then turn it back on.

Frequently Asked Questions

What microSD card should I buy for the Hero 4?

Buy a Class 10 card rated for at least 45 Mbps write speed. SanDisk Extreme and Kingston Canvas Go are common choices that work reliably. Avoid very cheap cards — they may drop frames or corrupt files. A 64GB card holds roughly 2 hours of 4K footage or 5 hours of 1080p.

Can I use the Hero 4 while it is charging?

Yes. The camera can record while plugged into a USB power source, though the battery will charge slowly if the camera is actively recording. For long sessions, use an external battery pack or plug into wall power rather than a computer USB port.

How do I slow down footage in editing?

Record at a higher frame rate than your final video — for example, shoot at 60fps if you want to play it back at 30fps. In editing software like Adobe Premiere or DaVinci Resolve, set the clip's frame rate to 30fps and it will play at half speed. The higher the frame rate you record at, the slower you can go without the footage looking choppy.

What is the difference between Photo and Burst mode?

Photo mode takes one image per button press. Burst mode captures 30 photos per second for as long as you hold the button, letting you pick the sharpest or most dramatic frame later. Use Burst for fast action; use Photo when you want one deliberate shot.

Why does my battery drain so fast?

Wi-Fi, 4K resolution, and high frame rates all drain the battery quickly. If you need longer recording time, switch to 1080p 30fps, turn off Wi-Fi, and keep the back screen off by not pressing buttons. A fully charged battery lasts longest in this configuration.