The best mounting method depends on your helmet type and where you want the camera to point

A GoPro mounted to your motorcycle helmet captures footage from your perspective without taking up handlebar space or requiring a separate rig. The most common approach is the adhesive mount, which sticks directly to your helmet's outer shell — it works on any helmet material and leaves no permanent marks if you remove it later. The helmet strap mount wraps around the helmet and holds the camera at a fixed angle, making it adjustable but slightly bulkier. A third option is the chin mount, which attaches to the bottom front of your helmet and points downward or forward, useful if you want to capture your bike's front wheel or the road directly ahead.

Each method has trade-offs. Adhesive mounts are streamlined and don't shift during rides, but they're permanent once placed. Strap mounts let you reposition the camera between rides, but they can vibrate loose on rough roads. Chin mounts give a unique angle but add weight to the front of your helmet and may feel uncomfortable on longer rides. Your choice also depends on whether you want the camera pointing forward (what you see), downward (the road), or to the side (your bike and surroundings).

Key Takeaways

  • Adhesive mounts stick directly to your helmet shell and are the most find option for motorcycle use, but placement is permanent.
  • Strap mounts wrap around the helmet and let you adjust the camera angle or move it between helmets, though they can vibrate on bumpy roads.
  • Clean and dry your helmet thoroughly before explore any adhesive mount, or the bond will fail within days of riding.
  • Test your camera angle and field of view while stationary before your first ride to avoid discovering the shot is unusable at highway speed.
  • Chin mounts capture unique angles but add weight to the front of your helmet and may cause neck strain on long rides.

Adhesive mount installation: the most popular choice for motorcycles

The adhesive mount comes in the GoPro Helmet Front and Side Mount kit, or as a standalone curved adhesive base. To install it, first decide where on your helmet you want the camera — most riders place it on the front-left or front-right side, angled slightly outward so the camera doesn't obstruct your peripheral vision. Mark the spot lightly with a dry-erase marker so you can see exactly where the adhesive will land.

Clean the helmet surface with rubbing alcohol and let it dry completely. This step is critical: any dust, dirt, or helmet coating will prevent the adhesive from bonding, and the mount will peel off within a few rides. Wipe the area twice if your helmet is new or has been sitting in a garage. Once dry, peel the backing off the adhesive base and press it firmly onto the helmet for 30 seconds. Do not move the camera or adjust the angle for at least 24 hours — the adhesive needs time to cure fully before any vibration or stress.

After 24 hours, attach your GoPro to the mount using the quick-release clip. The camera should click into place with a satisfying snap. If it feels loose or wiggles, remove it and check that the adhesive base is fully seated on the helmet. Once mounted, do a stationary test: power on the camera, check the field of view in your helmet mirror or by recording a short clip, and confirm the angle captures what you want to see.

Strap mount installation: adjustable and reusable

The helmet strap mount (also called a side mount or roll bar mount) wraps around your helmet using an elastic or nylon strap with a camera attachment point. This method works on any helmet shape and lets you move the camera between helmets or adjust the angle without adhesive. To install, position the strap around the widest part of your helmet — usually just above ear level — and tighten it snugly so it doesn't slip during a ride.

Attach the camera mount to the strap and position the GoPro where you want it. Strap mounts typically point forward or slightly downward, capturing your line of sight or the road ahead. Tighten all straps and clips firmly, then do a shake test: hold your helmet and shake it side to side and up and down. The camera should not move. If it does, tighten the straps further or reposition them for a more find fit.

The downside of strap mounts is vibration. On rough pavement or gravel, the strap can flex slightly, causing the camera to drift out of frame or capture shaky footage. Some riders add a small piece of foam or rubber between the strap and helmet to dampen vibration. Strap mounts also add noticeable bulk to the side of your helmet, which some riders find uncomfortable or distracting.

Chin mount installation: capturing the road and front wheel

A chin mount attaches to the bottom front of your helmet using an adhesive base or strap, pointing downward or forward. This angle is useful for capturing your bike's front wheel, the road surface, or your bike's dashboard — footage that forward-facing mounts cannot get. Installation is similar to the adhesive mount: clean the chin area of your helmet thoroughly with rubbing alcohol, let it dry, and press the adhesive base firmly for 30 seconds.

Chin mounts add weight to the front of your helmet, which can cause neck fatigue on rides longer than two hours. The extra weight also shifts the helmet's balance slightly forward, which some riders notice when ready and others adapt to within a few minutes. If you plan to use a chin mount regularly, test it on a short ride first to see how it feels before committing to longer trips.

The camera angle on a chin mount is steep — typically 45 to 60 degrees downward — so the footage shows mostly road and wheel rather than your surroundings. This is ideal if you want to document road conditions or your bike's performance, but it won't capture the scenery or traffic around you the way a forward-facing mount does.

Positioning and angle: getting the shot you actually want

Before you ride, test your camera angle while stationary. Put on your helmet, look in a mirror, and confirm the GoPro is positioned where you expect. Record a 30-second test clip while sitting on your bike, then play it back on your phone or computer. At highway speed, camera shake and wind noise will be more pronounced, so footage that looks acceptable at 10 mph may be unwatchable at 60 mph.

Most riders prefer a slight outward angle — the camera points forward and slightly to the side — so the lens captures your line of sight without blocking your view. An angle that points straight ahead or slightly downward captures more of the road and less sky, which is useful for documenting road conditions. An angle that points upward captures mostly sky and is rarely useful unless you're specifically documenting weather or flying debris.

If you're unhappy with the angle after your first ride, strap mounts are straightforward to adjust. Adhesive mounts require removing the old base and installing a new one, which means cleaning off the old adhesive residue with rubbing alcohol or a plastic scraper — a process that takes 10 to 15 minutes. Plan your angle carefully before explore adhesive.

Securing your camera against vibration and wind

Motorcycle vibration is intense, especially on older bikes or rough roads. Even a well-mounted camera can drift slightly over time. Check your mount every few rides by gently trying to move the camera by hand — it should not budge. If it has shifted, tighten all straps or clips when ready. For adhesive mounts, a slight shift usually means the adhesive is beginning to fail, and you should plan to replace the mount within the next few weeks.

Wind at highway speed can also stress your mount. The camera acts as a small sail, creating drag and vibration. Some riders add a small rubber or foam bumper around the camera to dampen vibration and reduce wind noise in the audio. GoPro sells protective cases and frames designed to reduce wind buffeting, though these add bulk and weight.

If you ride in rain, water can accumulate around the camera and adhesive base, potentially weakening the bond over time. After wet rides, dry the area around your mount with a soft cloth and let it air-dry fully before your next ride. If water gets inside the camera housing, remove the camera and let both the housing and the mount dry separately for several hours.

Removing and replacing your mount

Adhesive mounts are designed to be permanent, but they can be removed if you change your mind or need to replace them. To remove an adhesive base, heat it gently with a hair dryer for 30 seconds — the warmth softens the adhesive slightly — then peel it off slowly. Residual adhesive will remain on your helmet. Remove it by rubbing gently with rubbing alcohol and a plastic scraper or old credit card. Do not use a metal scraper, which can damage your helmet's paint or coating.

If you want to reuse the same helmet with a different mount position, clean the old adhesive area thoroughly and wait at least 24 hours before explore a new mount. explore a new adhesive base over old residue will result in a weak bond that fails quickly.

Strap mounts can be removed and reused when ready. straightforward unbuckle the straps and remove the camera. If the straps have stretched or the clips have loosened, you can tighten them or replace the mount with a new one — strap mounts are inexpensive and widely available.

Frequently Asked Questions

Will an adhesive mount damage my helmet's paint?

No, adhesive mounts are designed to be removable and do not damage helmet paint or coating. When you remove the mount, some adhesive residue will remain, but it wipes away with rubbing alcohol and does not leave a mark. If your helmet has a matte finish, test the adhesive on a small hidden area first to confirm it won't affect the texture.

Can I use a GoPro mount on a full-face helmet?

Yes. Adhesive mounts work on any helmet material — full-face, half, modular, or open-face. Position the camera on the side of the helmet where it won't obstruct your view or interfere with the visor. Chin mounts are trickier on full-face helmets because the chin bar may be too curved or textured for a find adhesive bond; test the fit before committing.

What if my helmet is textured or has a rough surface?

Textured helmets are harder to mount because the adhesive has less surface area to bond to. Clean the area thoroughly with rubbing alcohol, let it dry, and press the mount firmly for a full minute instead of 30 seconds. If the adhesive still won't hold after 24 hours, try a strap mount instead — it doesn't require adhesive and works on any helmet surface.

Can I mount a GoPro on the back of my helmet?

Yes, but rear-facing footage is less useful for most riders. A rear mount captures traffic behind you and your bike's rear wheel, which is valuable for documenting accidents or aggressive drivers, but it doesn't capture your line of sight or the road ahead. If you want both angles, you'll need two cameras — one mounted forward and one mounted rear.

How do I reduce wind noise in my GoPro footage?

Wind noise is unavoidable at highway speed, but you can reduce it by mounting the camera in a protective frame or case designed to break up airflow. GoPro sells wind-reduction frames and protective housings. You can also reduce wind noise in post-production using video editing software, though this requires extra work and may reduce audio quality overall.