Charging your GoPro Hero 4 with the right cable and power source
The GoPro Hero 4 charges through a USB micro cable connected to the camera's side port. You can plug that cable into any standard USB power adapter — the kind you use for phones or tablets — or into a computer's USB port. The camera does not have a removable battery, so you charge the whole unit, not a separate cell. Charging from empty to full takes roughly two to three hours depending on the power adapter you use.
The Hero 4 will charge whether the camera is powered on or off, though it charges faster when the camera is off. You can also use the camera while it charges, but the battery will fill more slowly. The camera shows a blinking red light while charging and a solid red light when fully charged.
Key Takeaways
- Use any standard USB power adapter and a micro USB cable to charge the Hero 4 through the port on the camera's side.
- Charging takes two to three hours from empty, and the camera charges faster when powered off.
- A solid red light means the battery is full; a blinking red light means charging is in progress.
- You can charge the camera from a computer USB port, a wall adapter, or a portable battery pack with a USB port.
What cable and adapter you need
The Hero 4 uses a micro USB cable, the same connector type found on most Android phones and many older devices. If you do not have one, they cost between $5 and $15 new, though you likely have one in a drawer from an old phone or tablet. The cable itself is just a standard micro USB cable — GoPro does not sell a proprietary version.
On the power adapter end, any USB power source works: a wall charger rated for phones, a laptop USB port, a car charger, or a portable battery pack. The Hero 4 does not demand high wattage. A standard 1-amp phone charger is fine, though a 2-amp adapter (common on tablet chargers) will charge the battery slightly faster. Do not use chargers rated above 2 amps, as they can damage the battery over time.
Charging from a wall outlet
Plug the micro USB cable into a standard USB power adapter and connect the other end to the port on the side of the camera. The port is small and recessed slightly into the body. Push the cable in firmly until you feel it seat — it should not require force, but it does need to be fully inserted to make contact.
Plug the adapter into any wall outlet. The camera will show a blinking red light on the back, indicating the charge is in progress. Leave it plugged in for two to three hours. Once the light turns solid red, the battery is full and you can unplug the cable.
Charging from a computer or portable battery
Any USB port on a computer will charge the Hero 4, though it will be slower than a wall adapter because computer USB ports typically supply less power. Plug the micro USB cable into an available USB port on your laptop or desktop, then connect the other end to the camera. The blinking red light will appear, and charging will proceed at a reduced speed — expect four to five hours instead of two to three.
Portable battery packs with USB ports also work. Make sure the pack has at least 1 amp of output; most modern packs do. The charging speed will depend on the pack's power rating. A high-capacity pack rated for 2 amps will charge the Hero 4 at roughly the same speed as a wall adapter.
Charging indicators and what they mean
The Hero 4 uses the red light on the back of the camera to show charging status. A blinking red light means the battery is actively charging. A solid red light means the battery has reached full charge and you can disconnect the cable. If the light does not appear at all when you plug in the cable, check that the cable is fully inserted into the port and that the power source is working.
If the camera is powered on while charging, you may see the light blink more slowly or inconsistently. This is normal and does not indicate a problem. The camera will still charge, just more slowly than if it were off.
Tips for longer battery life
Charge the Hero 4 when the battery is fully drained rather than topping it up frequently. Lithium batteries, which the Hero 4 uses, last longer if you let them run down before recharging. Avoid leaving the camera plugged in for hours after the light turns solid red; disconnect it once it is fully charged.
Store the camera with a partially charged battery if you will not use it for weeks or months. A completely empty battery can degrade during storage, and a completely full battery can also wear faster over time. Aim for 40 to 60 percent charge if you are putting the camera away for an extended period.
What to do if the camera will not charge
First, check that the cable is fully inserted into the port on the side of the camera. The connection is small and straightforward to miss. Try a different USB cable if you have one available — the cable itself may be damaged even if it looks fine. Try a different power adapter as well; the adapter may not be supplying power even though it appears to work.
If the camera still will not charge after trying different cables and adapters, the charging port itself may be damaged or the internal battery may have failed. This is rare but can happen if the port was forced or if the camera was exposed to water or impact. Contact GoPro support with the camera's serial number and a description of what you have tried. They can advise whether the camera needs repair or replacement.
Frequently Asked Questions
Can I charge the GoPro Hero 4 while recording?
Yes, you can use the camera while it charges. However, the battery will charge more slowly because the camera is drawing power while also storing it. If you need to charge quickly, power off the camera first.
How long does the battery last on a full charge?
The Hero 4 battery lasts roughly one to two hours of continuous recording, depending on resolution and frame rate. Higher resolutions and frame rates drain the battery faster. Cold temperatures also reduce battery life.
Is it safe to leave the camera plugged in overnight?
It is safe, but not ideal for long-term battery health. Once the light turns solid red, the battery is full and the camera stops charging. Leaving it plugged in longer does not improve the battery, and disconnecting it once full will extend its lifespan.
Can I use a fast charger meant for phones?
A standard phone charger rated up to 2 amps is fine. Chargers above 2 amps can damage the Hero 4 battery over repeated use, so avoid high-power fast chargers designed for newer phones.
What if the micro USB cable is damaged?
Buy a replacement micro USB cable from any electronics retailer. They are inexpensive and widely available. Make sure it is rated for data and power, not just charging, though most modern cables support both.