Charge your GoPro battery inside the camera or in a separate charger
You can charge a GoPro battery two ways: plug the camera itself into a USB power source, or remove the battery and charge it in a dedicated charger. Most GoPro models come with a USB-C cable and can charge while powered off. If you have multiple batteries, a separate charger is faster because you can charge one battery while using another in the camera.
The method you choose depends on whether you need the camera ready to shoot right away. Charging in the camera takes the same time as a dedicated charger—usually 1.5 to 2 hours for a full charge—but ties up your camera during that time. A dedicated charger costs extra but lets you rotate batteries without stopping work.
Key Takeaways
- GoPro batteries charge via USB-C cable connected to the camera, or you can remove the battery and use a separate charging dock designed for your model.
- A full charge takes 1.5 to 2 hours depending on the charger type and battery capacity; wall chargers are faster than computer USB ports.
- Always use the correct charger for your battery model—GoPro 11, 12, and 13 batteries are not interchangeable with older models.
- Avoid charging a battery that is extremely hot or cold; let it reach room temperature first to prevent damage.
- Store batteries in a cool, dry place when not in use, and recharge them every few months even if you are not using the camera.
Charging your GoPro inside the camera
To charge the battery while it stays in the camera, power off the camera completely. Connect the USB-C cable to the USB-C port on the camera—on most models this is on the bottom or side—and plug the other end into a wall charger, computer, or power bank. The camera does not need to be on during charging, and charging while powered off is actually faster than charging while the camera is on.
A wall charger rated for at least 5V/2A will charge the battery in roughly 1.5 to 2 hours. A computer USB port or lower-power charger will take longer, sometimes 3 to 4 hours. While charging, you may see a light on the camera or in the USB port area; this light usually stays on until the battery is full, then turns off or changes color. Check your camera's manual for what the light signals mean, because different models use different indicators.
Do not unplug the camera while charging is in progress, and do not use the camera while it is plugged in. Unplugging mid-charge can interrupt the process and leave the battery partially charged.
Using a dedicated battery charger
A dedicated charger holds one or more batteries outside the camera and charges them through contact points on the battery itself. GoPro sells official dual-slot chargers that can charge two batteries at once, which is useful if you shoot frequently and need backups ready. Third-party chargers are also available, though official GoPro chargers are more reliable.
To use a dedicated charger, remove the battery from the camera by opening the battery door—usually on the side or bottom—and sliding the battery out. Insert the battery into the charger's slot, making sure the contact points on the battery line up with the charger's metal contacts. Plug the charger into a wall outlet or USB power source. Charging time is the same as charging in the camera: 1.5 to 2 hours on a wall charger, longer on a USB port.
Most dedicated chargers have indicator lights that show charging progress. A red or amber light usually means charging is in progress; a green light means the battery is full. Once the light indicates a full charge, unplug the charger and remove the battery.
Matching the right charger to your battery model
GoPro batteries changed significantly between model generations, and using the wrong charger can damage the battery or charger. GoPro 11, 12, and 13 use the same battery type and chargers, so those are interchangeable. Older models like the GoPro 10, 9, 8, and 7 use different batteries and require their own chargers. If you own cameras from different generations, you need separate chargers for each.
Check your camera's model number—printed on the back or in the settings menu—before buying a charger. The charger packaging will list which camera models it works with. Using a charger designed for a different battery type can cause the battery to charge slowly, not charge at all, or overheat.
Charging times and power source differences
The speed of a full charge depends on the power source. A wall charger with 5V/2A output charges a GoPro battery in about 1.5 to 2 hours. A standard computer USB port (usually 5V/0.5A) takes 3 to 4 hours or longer. A USB power bank works if it has at least 2A output, but low-capacity power banks may charge very slowly.
Fast chargers rated for 5V/3A or higher will not damage a GoPro battery, but the battery itself limits how fast it can accept a charge. Using a faster charger than necessary does not speed up charging time significantly. Avoid chargers with unclear voltage or amperage ratings, as they may overheat the battery.
What to do if the battery will not charge
If a battery does not charge after 30 minutes, first check that the charger is plugged in and the power outlet works. Test the outlet with another device—a lamp or phone charger—to confirm it has power. Then inspect the battery's contact points and the charger's metal contacts for dirt, corrosion, or damage. Gently clean both with a dry cloth or cotton swab.
If the battery is extremely hot or cold, let it sit at room temperature for 30 minutes before trying again. Batteries charge poorly when they are outside the 50°F to 104°F (10°C to 40°C) range. If the battery still will not charge after cleaning and warming, the battery may be damaged and need replacement. Try the charger with a different battery if you have one; if that battery charges normally, the first battery is the problem.
Storing batteries and keeping them healthy
Store GoPro batteries in a cool, dry place away from direct sunlight and extreme heat. A drawer at room temperature is ideal. Do not leave batteries in a hot car or in direct sunlight for long periods, as heat degrades battery life over time. If you store a camera with the battery inside for more than a month, remove the battery and store them separately.
Recharge batteries every two to three months even if you are not using the camera. Lithium batteries lose charge over time, and letting a battery sit completely empty for months can damage it permanently. A quick 30-minute charge every few months keeps the battery healthy. If you own multiple batteries, rotate which ones you use to wear them evenly.
Frequently Asked Questions
Can I charge a GoPro battery with any USB-C charger?
Yes, any USB-C charger will work, but the charging speed depends on the charger's power output. A charger rated for 5V/2A or higher charges at normal speed. Slower chargers (like old phone chargers) will work but take much longer. Avoid chargers with unclear or very high voltage ratings.
How long does a GoPro battery last before it needs to be replaced?
A GoPro battery typically lasts 300 to 500 full charge cycles before capacity noticeably drops. If you charge the battery once a week, that is roughly 6 to 10 years. You will notice the battery drains faster than it used to before it stops working entirely. When a battery no longer holds a charge for a full day of shooting, it is time to replace it.
Is it bad to leave a GoPro plugged in after it is fully charged?
Modern GoPro chargers stop charging once the battery is full, so leaving it plugged in overnight will not damage the battery. However, unplugging once charging is complete saves a small amount of electricity. If you charge regularly, leaving it plugged in occasionally is not harmful.
Can I use a power bank to charge my GoPro?
Yes, as long as the power bank outputs at least 5V/2A. Check the power bank's label for its voltage and amperage. A low-capacity power bank (under 10,000 mAh) may not have enough power to charge a GoPro battery fully. Larger power banks work well for charging on the go.
What does it mean if the charging light blinks or changes color?
Light signals vary by camera model and charger type. A steady red or amber light usually means charging is in progress. A green light or no light typically means the battery is full. Check your camera's manual or the charger's instructions for the exact meaning of each light pattern on your specific model.