Charging your GoPro Hero 3 with the right cable and power source
The GoPro Hero 3 charges through a micro-USB port on the side of the camera body. You can charge it three ways: plugged into a wall outlet via USB adapter, connected to a computer, or using a portable battery pack. The camera itself does not have a removable battery — the internal lithium-ion battery charges while the camera is powered off or in standby mode.
Charging time is roughly two to three hours from completely empty using a standard 1-amp USB power adapter. The camera will not charge while recording or in active use. A full charge gives you between 60 and 90 minutes of recording time, depending on resolution and frame rate settings.
Key Takeaways
- The Hero 3 charges via the micro-USB port using any standard USB power adapter rated for at least 1 amp.
- Charging takes two to three hours from empty and works only when the camera is off or in standby mode.
- A full charge provides 60 to 90 minutes of recording time, with battery life varying by video resolution and frame rate.
- You can charge from a wall outlet, computer USB port, or portable battery pack — all use the same micro-USB connection.
Using a wall outlet with a USB adapter
Plug a standard USB power adapter into a wall outlet, then connect the micro-USB cable to the port on the side of your Hero 3. The camera should power off before you connect it. A light on the camera body will indicate charging status — typically a red or amber light means the battery is charging, and the light will turn off or change color when the charge is complete.
Use an adapter rated for at least 1 amp of output. Most phone chargers meet this requirement. Avoid very low-power adapters (under 500 milliamps), as they charge slowly and may not deliver enough current to power the camera if you try to use it while plugged in.
Charging from a computer USB port
Connect the micro-USB cable to any USB port on a computer or laptop. The charging speed will be slower than a wall adapter — typically four to five hours from empty — because standard computer USB ports deliver only 500 milliamps. The camera will charge whether the computer is asleep or awake, as long as the USB port remains powered.
This method works well for overnight charging or when you are at a desk. It is also useful if you need to transfer video files to your computer at the same time, since the USB connection handles both charging and data transfer simultaneously.
Portable battery packs and travel charging
Any portable USB battery pack with a micro-USB output port will charge your Hero 3. Look for a pack rated at least 2000 milliamp-hours (mAh) to get a meaningful charge — a 2000 mAh pack will give you roughly one full charge of the camera. Larger packs (5000 mAh or higher) can charge the camera multiple times before the pack itself needs recharging.
Portable packs are the best option for field use when you do not have access to wall power. Charge the battery pack itself before you leave home, then use it to top up the camera between recording sessions. Some packs include multiple USB ports, so you can charge the camera and another device at the same time.
What to do if the camera will not charge
First, check that the micro-USB cable is fully inserted into the port — the connection can be loose if the cable is slightly misaligned. Try a different USB power adapter to rule out a faulty adapter. If the camera still does not charge, the micro-USB port itself may be damaged or the internal battery may have failed.
If the port looks bent or corroded, do not force the cable in. Water damage is a common cause of charging failure on GoPro cameras, even though the Hero 3 is waterproof during normal use. Saltwater or sand in the port can prevent charging. In these cases, the camera will likely need professional repair or replacement.
Battery lifespan and storage tips
The Hero 3 battery will degrade over time with repeated charge cycles. After two to three years of regular use, you may notice the camera holds a charge for noticeably less time than when it was new. This is normal for lithium-ion batteries and does not mean the camera is broken.
If you plan to store the camera for more than a month, charge it to about 50 percent before putting it away. Storing a fully charged or completely empty battery can shorten its lifespan. Keep the camera in a cool, dry place — heat accelerates battery degradation. Avoid leaving the camera plugged in continuously for weeks at a time, as this can also reduce long-term battery health.
Frequently Asked Questions
Can I charge the Hero 3 while it is recording?
No. The camera must be powered off or in standby mode to charge. If you plug it in while recording, the charging will not begin. You need to stop recording and turn off the camera first.
What is the difference between charging from a wall outlet and a computer?
A wall adapter with at least 1 amp charges the camera in two to three hours. A computer USB port delivers only 500 milliamps and takes four to five hours. Wall charging is faster, but computer charging works fine if you have the time.
Can I use any micro-USB cable to charge the Hero 3?
Yes. Any standard micro-USB cable works with the Hero 3. You do not need a GoPro-branded cable. The cable itself does not matter — only the power adapter needs to deliver at least 1 amp for fast charging.
How long does a full charge last?
A full charge typically lasts 60 to 90 minutes of recording. The exact time depends on video resolution, frame rate, and features like WiFi and image stabilization. Higher resolutions and frame rates drain the battery faster.
Is it bad to leave the Hero 3 plugged in overnight?
Occasional overnight charging is fine, but avoid leaving it plugged in continuously for days or weeks. Modern cameras stop charging once the battery is full, but keeping a lithium-ion battery at 100 percent for extended periods can reduce its overall lifespan over time.