Charging your Hero 3 requires the right cable and a power source — the camera does not charge inside its waterproof housing

The GoPro Hero 3 charges through a micro-USB port on the side of the camera body. You cannot charge it while the camera is inside the waterproof case. The battery itself does not come out; you charge the whole camera by connecting the micro-USB cable to a power adapter, computer, or portable battery pack.

The Hero 3 ships with a USB cable but not a power adapter. Most households already have a USB power adapter from a phone or tablet — any adapter rated for at least 1 amp will work. Charging from a computer USB port is slower but works if you have time.

Key Takeaways

  • Remove the camera from its waterproof housing before plugging in the micro-USB cable.
  • Any standard USB power adapter rated 1 amp or higher will charge the Hero 3 at normal speed.
  • A full charge takes roughly two to three hours from a wall adapter, longer from a computer port.
  • The camera does not have a removable battery, so you must charge the whole unit.

What cable and adapter you need

The Hero 3 uses a micro-USB cable, the same type used by older Android phones, Kindle devices, and many other electronics. If you do not have one, they cost a few dollars at any electronics store or online retailer. The cable that came with your Hero 3 works, or you can use any micro-USB cable you already own.

For the power adapter, use any USB power adapter rated for 1 amp or higher. Most phone chargers from the last ten years meet this spec. Check the adapter itself — it will say something like "1A" or "2A" or "5V 1A". If you only have a very old adapter rated below 1 amp, the camera will charge but much more slowly.

You can also charge from a computer by plugging the micro-USB cable into a USB port on your laptop or desktop. This is slower than a wall adapter but works if you need to charge overnight or have no other option.

Step-by-step charging process

First, remove the camera from its waterproof housing. The Hero 3 has a micro-USB port on the right side of the body (when looking at the screen). The port is small and recessed slightly into the camera.

Plug the micro-USB cable into the port. The cable should slide in smoothly — do not force it. Once connected, plug the other end into your power adapter or computer USB port. A small LED light on the camera will turn on, usually red or orange, to show charging is happening.

Leave the camera plugged in until the LED turns off or changes color, which signals the battery is full. This typically takes two to three hours from a wall adapter. Do not unplug the cable while the LED is still lit.

How long charging takes

From a standard USB wall adapter (1 to 2 amps), a fully drained Hero 3 battery reaches full charge in roughly two to three hours. The exact time depends on how much battery remains and the power output of your specific adapter.

Charging from a computer USB port takes longer — usually four to six hours — because computer ports deliver less power than a wall adapter. If you are in a hurry, use a wall adapter instead.

The camera does not get hot during normal charging. If it becomes very warm to the touch, unplug it and let it cool for a few minutes before trying again.

Protecting the micro-USB port

The micro-USB port is the only way to charge the Hero 3, so keeping it clean and dry is important. When the camera is not charging, the port is exposed to dust and moisture. If you use the camera in sandy or dusty environments, wipe the port gently with a dry cloth before charging.

Do not force the cable into the port or bend it at sharp angles. The port is durable but can wear out if the cable is plugged and unplugged roughly many times. Insert the cable straight and unplug it straight.

If water gets into the port, let the camera dry completely before charging — at least 24 hours in a warm, dry place. Charging a wet port can damage the camera.

Charging from portable battery packs

You can charge the Hero 3 from a portable USB battery pack (sometimes called a power bank). This is useful if you are traveling or filming away from outlets. Any portable battery pack with a standard USB port will work.

The charging speed depends on the battery pack's power output. Most modern packs deliver 1 to 2 amps, so charging time is similar to a wall adapter. Older or smaller battery packs may charge more slowly.

Portable battery packs are especially helpful if you have multiple GoPro batteries or other devices to charge, since you can top up the camera without finding an outlet.

Signs of a charging problem

If the LED does not light up when you plug in the cable, first check that the cable is fully inserted into the port. Try a different USB cable if you have one — the cable itself may be damaged. If a different cable works, the original cable is the problem.

If the LED still does not light with a different cable, try a different power adapter. Some adapters fail or deliver no power even though they look fine. If the camera charges with a different adapter, your original adapter is faulty.

If the camera does not charge with multiple cables and multiple adapters, the micro-USB port or the camera's internal charging circuit may be damaged. At that point, the camera likely needs repair or replacement.

Frequently Asked Questions

Can I charge the Hero 3 while it is in the waterproof case?

No. The waterproof housing covers the micro-USB port completely. You must remove the camera from the case before plugging in the charging cable. Once the battery is full, you can put the camera back in the case.

What happens if I leave the Hero 3 plugged in after it is fully charged?

The camera will not overcharge. Once the battery reaches full capacity, the charging circuit stops delivering power. You can safely leave it plugged in overnight, though it is not necessary. Unplugging it when the LED turns off is fine too.

Does the Hero 3 charge faster with a higher-amp adapter?

Not significantly. The Hero 3 charges at roughly the same speed with a 1-amp adapter and a 2-amp adapter. Using an adapter rated below 1 amp will charge it more slowly. Going above 2 amps does not speed it up further.

Can I use a USB-C cable or Lightning cable to charge the Hero 3?

No. The Hero 3 has a micro-USB port only. USB-C and Lightning cables will not fit. You need a micro-USB cable specifically.

How often should I charge the Hero 3 battery?

Charge it whenever the battery runs low. Lithium batteries like the one in the Hero 3 do not have a memory effect, so you do not need to fully drain it before charging. Charging it partially or fully whenever convenient is fine.