Charge Your Hero 3 Using the USB Cable and a Power Source

The GoPro Hero 3 charges through its micro-USB port, located on the side of the camera body. You can charge it using any standard USB power adapter—the kind that came with your phone, a computer, or a wall charger rated for 5V output. Plug the micro-USB cable into the port on the camera, connect the other end to a USB power adapter, and plug the adapter into a wall outlet. The camera does not need to be powered on to charge.

Charging time depends on the battery capacity and the power source. A standard 1A USB adapter typically takes 2 to 3 hours to fully charge the Hero 3 battery from empty. A 2A adapter (like those for tablets) will charge faster, usually in 1.5 to 2 hours. The camera will not display a charging indicator on the screen while powered off, so you will not see a progress bar—just leave it plugged in for the full duration.

Key Takeaways

  • The Hero 3 charges through a micro-USB port on the camera body using any standard USB power adapter rated for 5V output.
  • Charging takes 2 to 3 hours with a standard 1A adapter, or 1.5 to 2 hours with a higher-amperage adapter.
  • You can charge the camera while it is powered off or on, though charging while off is faster and safer for the battery.
  • If the battery drains completely, it may take a few minutes before the camera recognizes the charger and begins charging.
  • A fully charged Hero 3 battery provides roughly 1 to 2 hours of recording time, depending on resolution and frame rate settings.

Charging While the Camera Is Powered On

You can charge the Hero 3 while it is turned on, which is useful if you want to transfer files to a computer at the same time. When powered on and plugged in, the camera will show a charging indicator on the back screen—usually a lightning bolt or battery icon. The charging process will be slower when the camera is on because the processor and screen are drawing power.

Charging while powered on also generates more heat inside the camera body. For this reason, it is better to charge with the camera off whenever possible, especially if you are charging in a warm environment. If the camera gets too hot, it may pause charging temporarily to protect the battery.

What to Do If Your Camera Will Not Charge

If you plug in the Hero 3 and nothing happens, first check that the micro-USB cable is fully inserted into the port. The connection can be loose, and the camera will not charge if the cable is not seated properly. Try wiggling the cable gently while it is plugged in—if you feel it click into place, that was the problem.

If the battery has been completely drained for a long time, it may take 30 seconds to a few minutes before the camera recognizes the charger and begins charging. Leave it plugged in for at least 5 minutes before assuming the charger is broken. If the camera still does not respond, try a different USB power adapter or a different micro-USB cable. The cable itself can fail, and a faulty adapter may not deliver enough power to start the charging process.

Inspect the micro-USB port on the camera for debris, lint, or corrosion. If the port looks dirty, use a dry cotton swab or a small brush to gently clean it. Do not use water or liquid cleaners, as moisture inside the port can damage the camera. If the port is visibly damaged or bent, the camera will need professional repair.

Using a Replacement Battery and Dual Charger

The Hero 3 uses a rechargeable lithium-ion battery (model AHDBT-301 or AHDBT-302, depending on your specific Hero 3 version). If you record frequently, buying a second battery and a dual-slot charger is practical. A dual charger lets you charge two batteries at once without using the camera itself, so you can keep one battery in the camera while the other charges separately.

Dual chargers for the Hero 3 typically plug into a wall outlet via USB and charge both batteries in 2 to 3 hours. They are sold by GoPro and by third-party manufacturers. When buying a replacement battery or charger, confirm it is rated for your specific Hero 3 model—the original Hero 3 (white), Hero 3 Silver, and Hero 3 Black all use compatible batteries, but some older or newer GoPro models use different battery types.

Battery Care and Storage

Lithium-ion batteries last longer if you avoid letting them drain completely. Try to recharge the Hero 3 when the battery reaches 20 percent rather than waiting until it is dead. Similarly, do not leave the battery fully charged for weeks at a time. If you are storing the camera for more than a month, charge the battery to about 50 percent and store it in a cool, dry place.

Heat degrades lithium-ion batteries faster than anything else. Never leave your Hero 3 in a hot car, direct sunlight, or near a heat source while charging. If the camera feels hot to the touch during charging, unplug it and let it cool for 15 minutes before plugging it back in. Over time, all rechargeable batteries lose capacity—after 300 to 500 charge cycles, you may notice the battery no longer holds a full charge for as long as it once did. At that point, a replacement battery is the only solution.

Charging on the Road and with Different Power Sources

When traveling, a portable USB power bank designed for phones or tablets will charge your Hero 3 just as well as a wall outlet. Look for a power bank with at least 2000 mAh capacity and a USB output port. Plug the micro-USB cable into the power bank, and the charging process works the same way as with a wall adapter.

You can also charge the Hero 3 from a car's 12V outlet using a USB car charger. These plug into your vehicle's cigarette lighter socket and provide a USB port for your cable. Car chargers vary in output amperage, so choose one rated for at least 1A to may support reasonable charging speed. Avoid cheap or damaged car chargers, as they can deliver unstable power and damage the battery.

Frequently Asked Questions

Can I charge my Hero 3 with a fast charger meant for phones?

Yes, as long as the charger is rated for 5V output. Many modern phone chargers output 2A or more, which will charge your Hero 3 faster than a standard 1A adapter. The camera's charging circuit will only draw the power it needs, so a high-amperage charger will not damage the battery.

How long does a fully charged Hero 3 battery last during recording?

A full charge typically provides 1 to 2 hours of recording time. The exact duration depends on resolution, frame rate, and features like WiFi or image stabilization. Higher resolutions and frame rates drain the battery faster. Recording at 1080p 30fps will last longer than recording at 4K, for example.

Is it safe to charge the Hero 3 overnight?

Yes, it is safe to leave the camera plugged in overnight. Modern lithium-ion batteries and chargers have built-in protection that stops charging once the battery reaches 100 percent, so overcharging is not a risk. However, if the camera is in a warm room, unplugging it after it finishes charging will extend the battery's lifespan slightly.

What does it mean if the camera gets hot while charging?

Some warmth is normal, but if the camera is too hot to hold comfortably, unplug it when ready. Excessive heat can damage the battery or the charging circuit. Let the camera cool for 15 minutes, then try charging again. If it heats up again, the charger, cable, or battery may be faulty and should be replaced.

Can I use the Hero 3 while it is charging?

Yes, you can record, transfer files, or use WiFi while the camera is plugged in and charging. However, charging will be slower because the camera is drawing power for its operations. For the fastest charge, power off the camera completely before plugging it in.