Charging the GoPro Hero 4 with the standard USB cable

The GoPro Hero 4 charges through a micro-USB port on the side of the camera body. Plug the included USB cable into that port, then connect the other end to any standard USB power source — a wall adapter, computer, or portable battery pack. The camera does not need to be powered on to charge; in fact, turning it off speeds up the process.

Charging time depends on the power source. A standard 1-amp USB wall adapter takes roughly three to four hours to fully charge the internal battery from empty. A 2-amp adapter cuts that to about two hours. Plugging into a computer USB port is slower — expect four to five hours — because most computers supply less power than a wall outlet.

While charging, a small LED light on the camera will glow red. When the battery reaches full capacity, the light turns off or changes color depending on your firmware version. Some users report the light staying red even after the battery is full; if the camera powers on and runs normally, the battery is charged regardless of the light status.

Key Takeaways

  • The Hero 4 charges through the micro-USB port on the camera body using the included cable and any standard USB power source.
  • A 2-amp wall adapter charges the battery in roughly two hours, while a standard 1-amp adapter takes three to four hours.
  • The camera charges faster when powered off, and you do not need to turn it on to monitor charging progress.
  • A red LED indicates charging is in progress; the light turns off or changes when the battery is full, though some firmware versions keep the light on even after charging completes.

Using the GoPro Hero 4 Dual Battery Charger

GoPro sells a separate Dual Battery Charger (model AHDBT-401) that charges two batteries at once without requiring the camera itself. This charger has two slots and connects to any USB power source via its own micro-USB cable. It is useful if you own multiple batteries and want to charge them while using the camera, or if you prefer not to plug the camera into a wall outlet.

The Dual Battery Charger charges each battery independently. A red LED above each slot shows charging status — red means in progress, and the light turns off when that battery is full. Charging time is similar to charging through the camera: roughly two to three hours per battery with a 2-amp adapter, longer with weaker power sources.

The Dual Battery Charger is optional but worth considering if you shoot frequently or take long trips. It costs less than a replacement battery and lets you rotate between charged and depleted batteries without stopping to charge the camera itself.

Charging while recording or using the camera

You can charge the Hero 4 while it is powered on and recording, though this is not ideal for battery longevity. The camera will draw power from the charging source first, then use the battery as a secondary power supply. This means the internal battery drains more slowly than it would on battery power alone, but the battery still loses charge over time.

If you plan to record for extended periods, use a high-capacity USB power bank rated for at least 2 amps. Cheaper power banks may not supply enough current to both charge the battery and power the camera simultaneously, and the battery may drain despite being plugged in. Test your setup before relying on it for important footage.

What to do if the camera will not charge

If the LED does not light up when you plug in the cable, first try a different USB power source and a different cable if you have one available. The micro-USB port can accumulate dust or lint, which blocks the connection. Use a dry cotton swab or a small brush to gently clean inside the port, then try charging again.

If the camera still will not charge, the battery itself may be dead. Lithium batteries in GoPro cameras can fail after many charge cycles, typically after two to three years of regular use. A replacement battery (model AHDBT-401) costs less than a new charger and is the most common fix. If a new battery charges normally but the original battery does not, the original battery has reached the end of its life.

If neither the original battery nor a replacement battery charges, the micro-USB port or the camera's charging circuit may be damaged. This is less common but can happen if the camera was dropped or exposed to water despite being waterproof. Contact GoPro support or a camera repair service for diagnosis.

Battery care and charging best practices

Lithium batteries last longer when you avoid letting them fully drain before recharging. If you use the Hero 4 regularly, charge the battery when it reaches 20 percent rather than waiting until it is completely empty. This extends the total number of charge cycles the battery can handle before it no longer holds a full charge.

Store the camera with the battery at roughly 50 percent charge if you will not use it for more than a few weeks. A battery left fully charged or fully drained for months can lose the ability to hold a charge. If you store the camera for the winter or during an off-season, charge the battery to half capacity before putting it away, then top it up every few months.

Heat degrades lithium batteries faster than cold does. Avoid leaving the camera in direct sunlight or in a hot car while charging. A cool room temperature is ideal. If the camera feels warm during charging, unplug it and let it cool for 15 minutes before resuming.

Charging with third-party USB adapters and power banks

The Hero 4 works with any USB power source that supplies at least 1 amp. You do not need a GoPro-branded adapter. A standard phone charger, laptop power supply, or portable battery pack will work as long as it has a USB port and outputs 5 volts. Higher-amperage adapters (2 amps or more) charge faster but do not damage the battery.

Avoid very cheap power banks or adapters with no brand name, as they may supply unstable voltage that can damage the charging circuit over time. Reputable brands like Anker, Belkin, or the charger that came with your phone are safe choices. If you already own a USB power bank or wall adapter for another device, it will almost certainly work with the Hero 4.

Frequently Asked Questions

Can I charge the GoPro Hero 4 with a phone charger?

Yes. Any USB phone charger that outputs 5 volts will charge the Hero 4. A charger rated for 2 amps charges faster than a 1-amp charger, but both work safely. The camera's charging circuit prevents overcharging, so leaving it plugged in after the battery is full will not damage the battery.

How long does a full charge last when recording?

A fully charged Hero 4 battery records for roughly one to two hours of continuous 1080p video, depending on frame rate and resolution. 4K recording drains the battery faster — expect 45 minutes to one hour. Cold temperatures also reduce battery life by 20 to 30 percent.

Is it safe to leave the camera charging overnight?

Yes. The Hero 4 has built-in protection that stops charging once the battery reaches full capacity, so leaving it plugged in overnight will not overcharge or damage the battery. However, unplugging it when fully charged is slightly better for long-term battery health.

What is the difference between charging through the camera and using the Dual Battery Charger?

Charging through the camera takes the same time as the Dual Battery Charger, but it ties up the camera while charging. The Dual Battery Charger lets you charge two batteries at once without using the camera, which is more convenient if you own multiple batteries or need to record while batteries charge.

Why does my battery drain even when the camera is plugged in?

If the power source supplies less than 1 amp, the camera may draw more power than the charger supplies, causing the battery to drain slowly despite being plugged in. Use a 2-amp adapter or power bank instead. Also check that the micro-USB cable is fully inserted into the port — a loose connection charges very slowly.