The GoPro Hero 4 uses a standard micro-USB cable and takes about two to three hours to charge fully
Your GoPro Hero 4 comes with a rechargeable lithium-ion battery that sits inside the camera body. To charge it, you connect the camera to a power source using the micro-USB cable that came in the box. The camera itself is the charging dock — you do not need a separate charger. Plug the micro-USB end into the port on the side of the camera, connect the other end to any USB power adapter (the kind you use for phones), and the battery charges while the camera sits on a table or desk.
The camera has a small LED light near the power button that tells you the charging status. A blinking light means the battery is charging. When the light stops blinking and stays solid, the battery is full. If you see a red light, the battery is too cold or too hot to charge safely — move the camera to room temperature and try again.
Key Takeaways
- The Hero 4 charges through the micro-USB port on the side of the camera using any standard USB power adapter.
- A full charge takes two to three hours, and the LED light on the camera shows you when charging is complete.
- You can use any USB power adapter — phone chargers, laptop chargers, or wall outlets with USB ports all work.
- The camera does not need to be powered on to charge, and you can use it while it is plugged in if you need to.
- If the LED light turns red, the battery temperature is outside the safe charging range and you should move the camera to room temperature.
What cable and power adapter you need
The micro-USB cable that shipped with your Hero 4 is the correct one to use. If you have lost it, any micro-USB cable will work — they are the standard charging cable for older phones, tablets, and many other devices, so you may already have one in a drawer. The cable itself is not proprietary to GoPro.
For the power adapter, you have several options. Any USB power adapter rated for at least 1 amp will charge the Hero 4. This includes phone chargers, tablet chargers, laptop USB ports, car chargers, and wall outlets with built-in USB ports. Higher amperage (2 amps or more) will not damage the battery — it will just charge slightly faster. If you are charging from a computer's USB port directly, the charge will be slower because computer ports typically supply less power than a wall adapter.
Charging times and what to expect
A completely dead battery takes about two to three hours to reach full charge when you use a standard 1-amp USB power adapter. If you use a higher-amperage adapter (2 amps or more), the charge time may drop to closer to two hours. Charging from a computer USB port takes longer — sometimes four hours or more — because the power supply is weaker.
You do not have to wait for the battery to be completely full before you use the camera. You can unplug it at any point and start recording. The battery will hold whatever charge it has reached. If you are in a hurry and only need 30 minutes of recording time, 45 minutes of charging is usually enough.
Charging while the camera is powered on
The Hero 4 can charge while it is turned on and in use. This is useful if you want to review footage or adjust settings while the battery tops up. The charging speed is the same whether the camera is on or off, so there is no advantage to powering it down.
If you are recording video while the camera is plugged in, the battery will charge at the same time. This means you can run the camera continuously as long as it is connected to power — useful for time-lapse or stationary recording setups where you do not need to move the camera around.
Troubleshooting when the camera will not charge
If the LED light does not blink when you plug in the cable, first check that the micro-USB cable is fully inserted into the port on the side of the camera. The connection can be loose if the cable is not pushed all the way in. Try a different USB power adapter to rule out a problem with the adapter itself.
If the LED light turns red instead of blinking, the battery is too cold or too hot. Move the camera to a room-temperature location and wait 15 to 20 minutes before trying again. Lithium-ion batteries have built-in safety limits that prevent charging outside a safe temperature range.
If the camera still will not charge after trying a different cable and adapter, and the battery is at room temperature, the battery itself may be damaged. GoPro batteries are replaceable — you can order a new one from GoPro's website or from electronics retailers. Replacement batteries are inexpensive and take only a few seconds to swap out.
How to know when your battery is failing
A healthy Hero 4 battery holds a charge for 60 to 90 minutes of continuous recording, depending on resolution and frame rate. If your battery now only lasts 20 or 30 minutes after a full charge, the battery is degrading. Lithium-ion batteries lose capacity over time — this is normal and happens to every rechargeable battery eventually.
If the battery drains to zero within a few minutes of unplugging the camera, or if it will not hold any charge at all, the battery has reached the end of its life. Replacement batteries are the solution. You can buy them directly from GoPro or from third-party retailers like Amazon. Installation takes seconds: open the battery door on the bottom of the camera, slide out the old battery, and slide in the new one.
Extending battery life between charges
You can stretch the time between charges by turning off features you are not using. Disable Wi-Fi and Bluetooth if you are not controlling the camera remotely. Lower the screen brightness or turn off the rear display entirely — the screen uses significant power. Recording at lower resolution (1080p instead of 4K) also reduces battery drain.
Store the camera in a cool, dry place when you are not using it. Heat degrades lithium-ion batteries faster, so avoid leaving the camera in a hot car or direct sunlight for long periods. If you plan to store the camera for weeks or months without using it, charge the battery to about 50 percent and then power off the camera. This is easier on the battery than storing it fully charged or completely empty.
Frequently Asked Questions
Can I charge the GoPro Hero 4 with a phone charger?
Yes. Any USB phone charger works with the Hero 4 as long as you have a micro-USB cable. The charger does not need to be made by GoPro. A standard Android phone charger is perfect for this.
What happens if I use a charger with higher amperage than recommended?
Higher amperage (2 amps or more) will not damage the battery. The camera's charging circuit only draws the power it needs, so a more powerful adapter straightforward charges the battery faster without any risk.
How long does a full battery last during recording?
A full charge typically lasts 60 to 90 minutes of continuous recording. The exact time depends on resolution, frame rate, and whether features like Wi-Fi are enabled. Lower resolutions and frame rates extend battery life.
Can I charge the Hero 4 from a power bank?
Yes, as long as the power bank has a USB output port and a micro-USB cable. Larger power banks with higher capacity will charge the camera multiple times before the power bank itself needs recharging.
Is it bad to leave the camera plugged in after it is fully charged?
No. The Hero 4's charging circuit stops charging once the battery is full, so leaving it plugged in overnight or for hours after charging is complete will not damage the battery.