Delete Files Directly on Your GoPro Camera
The fastest way to delete video and photo files from your GoPro is to use the camera's built-in menu while the SD card is still inside. You do not need a computer—the camera handles everything. Navigate to the Playback menu on your GoPro's screen, find the file you want to remove, and select the delete option. The file disappears when ready.
This method works well if you want to keep some footage and remove only specific clips or photos. You can review each file on the camera's screen before deciding whether to delete it. The process takes a few seconds per file, so if you have dozens of videos to remove, formatting the entire card (explained below) is faster.
Key Takeaways
- Delete individual files through your GoPro's Playback menu by selecting each file and choosing delete from the options.
- Format the entire SD card through Settings > Format Card to erase everything at once, which is faster than deleting files one by one.
- Formatting prepares a new card for use and fixes corruption issues, but erases all footage permanently—back up your videos first if you want to keep them.
- Always insert the SD card into the GoPro itself rather than a computer to format, because the camera's format is optimized for GoPro recording.
- A low battery during formatting can damage the card, so charge your GoPro fully before starting the process.
Format the SD Card to Erase Everything at Once
Formatting erases all files on the card in one step and prepares it for fresh recording. On most GoPro models, go to Settings, scroll to Format Card, and confirm. The camera will display a warning that all data will be erased—this is normal. The process takes 30 seconds to two minutes depending on card size.
Format your card when you want a clean slate: before a new trip, after backing up old footage to a computer, or if the card is acting slow or showing errors. Formatting also fixes minor corruption that can slow down recording or playback. Do not format if you have any footage on the card you want to keep, because formatting cannot be undone.
Back Up Your Videos Before Formatting
Once you format the card, the files are gone permanently. Before you format, connect your GoPro to a computer with a USB cable and copy all the video and photo files to a folder on your hard drive. Most computers will recognize the GoPro as an external drive—just drag the files over.
If you have a large amount of footage, this can take 10 to 30 minutes depending on file size and USB speed. Use a USB 3.0 cable if your GoPro supports it (newer models do), because it transfers files much faster than USB 2.0. Once the files are safely on your computer, you can format the card without worry.
Why Your GoPro Card Might Need Formatting
SD cards can develop small errors over time, especially if they are removed during recording or if the camera loses power unexpectedly. These errors do not always show up right away—you might notice the card is slower, or the camera takes longer to save files. Formatting clears these errors and restores the card to full speed.
If your GoPro shows a message like "Card Error" or "Card Full" even though you have deleted files, formatting usually fixes it. A card that has been used in multiple devices (a computer, a phone, another camera) may also benefit from formatting in the GoPro, because each device uses slightly different formatting. Formatting in your GoPro ensures the card is optimized for that camera.
Charge Your GoPro Before Formatting
Always plug your GoPro into power before you format the card. If the battery dies during formatting, the process can be interrupted and damage the card permanently. A full charge takes 60 to 90 minutes depending on the model and charger type. Use the official GoPro charger or a high-quality third-party charger that delivers the correct voltage.
If your battery is low and you need to format right away, plug the camera in and wait for the battery icon to show full before you start. This adds a few minutes to your workflow but protects the card from corruption. A damaged card may not be recoverable, so this precaution is worth the wait.
Delete Files on a Computer Instead
If you prefer to manage files on a larger screen, connect your GoPro to a computer with a USB cable. The camera will appear as a removable drive or folder. Open it and navigate to the DCIM folder, where all your videos and photos are stored. You can delete individual files or entire folders by right-clicking and selecting delete, then emptying your computer's trash.
This method gives you more control and lets you see file names and dates clearly. However, deleting files on a computer does not format the card—it only removes individual files. If you want to erase everything and prepare the card for fresh use, you still need to format it through the GoPro's Settings menu.
Frequently Asked Questions
Can I recover files after formatting the SD card?
Once you format a card in your GoPro, the files are erased and cannot be recovered through normal means. Some data recovery software exists, but it is unreliable and expensive. The safest approach is to back up all footage to a computer before you format.
How often should I format my SD card?
Format your card every few months if you use it regularly, or whenever you notice the camera is slow to save files. You do not need to format after every trip—only when you have backed up the footage and are ready to start fresh.
What size SD card do I need for my GoPro?
Most GoPro models work with cards up to 256 GB, though 64 GB or 128 GB is typical for most users. Larger cards hold more footage but take longer to format. Check your GoPro's manual for the maximum supported size, as older models may have limits.
Will formatting the card make it faster?
Yes, formatting can restore a card's speed if it has slowed down over time. A freshly formatted card will record and save files faster than one that has accumulated errors. If the card remains slow after formatting, it may be failing and should be replaced.
Do I need to format a brand new SD card before using it?
It is a good idea to format a new card in your GoPro before recording, even though it comes pre-formatted from the manufacturer. This ensures the card is optimized for your specific camera model and reduces the chance of errors later.