The fastest way to erase your SD card

The quickest method is to erase the card directly on your GoPro using the camera's menu. Power on your GoPro, press the Mode button to enter the settings menu, navigate to Preferences, select Delete All, and confirm. The camera will wipe every file on the card in two to five minutes depending on card size and how full it is. This is faster than connecting to a computer and safer than removing the card while the camera is powered on.

If your GoPro is already connected to your computer or phone, you can also erase files through the GoPro app or by dragging files to trash in your file manager. However, the on-camera method is the most reliable because it formats the card to match your GoPro's requirements, not your computer's.

Do not pull the card out while the camera is erasing. Wait for the confirmation message on the screen before you power off or remove the card.

Key Takeaways

  • Erasing on the camera itself is faster and safer than using a computer, and it formats the card correctly for your GoPro.
  • The on-camera method takes two to five minutes and requires only the Mode button and the settings menu.
  • You can also erase individual files through the GoPro app or by connecting the card to a computer, but this does not format the card.
  • Never remove the SD card while the camera is erasing or powered on.

Step-by-step: erasing on your GoPro

Start with the camera powered on and the SD card inserted. Press the Mode button on the back of the camera to open the main menu. You will see icons for video, photo, and settings — the settings icon looks like a wrench or gear.

Scroll down to Preferences and press the shutter button to select it. Scroll down again until you see Delete All or Format Card (the exact wording varies by GoPro model). Press the shutter button to select it. The camera will ask you to confirm — press the shutter button once more to proceed. A progress bar will appear on the screen. Do not turn off the camera or remove the card until the bar reaches 100 percent and you see a completion message.

Once the erase is complete, the camera will return to the main menu. Your SD card is now empty and ready to record.

Erasing through the GoPro app on your phone

Connect your GoPro to your phone using the GoPro app (available on iOS and Android). Open the app and tap the camera icon at the bottom of the screen. Tap the three-dot menu in the top right corner and select Settings. Scroll down to find Delete All Files or Format Card. Tap it and confirm when the app asks you to verify.

This method works if your camera is already paired with your phone, but it is usually slower than erasing on the camera itself. The app also sometimes loses connection mid-erase, which can leave the card in an unstable state. If the app disconnects, power off your GoPro, remove the card, and erase it on the camera instead.

Erasing files on a computer

Remove the SD card from your GoPro and insert it into an SD card reader connected to your computer. Open your file manager (Finder on Mac, File Explorer on Windows) and locate the card. You will see folders labeled DCIM and MISC. Select all files and folders, then drag them to the trash or press Delete. Empty the trash to permanently remove them.

This method works, but it does not format the card the way your GoPro expects. Over time, this can cause the camera to run slower or fail to record. If you erase files on a computer, connect the card back to your GoPro and run the on-camera erase once to reformat it properly.

Do not remove the card from the reader while files are being deleted. Wait for the operation to finish and for the file manager to show an empty card before you unplug the reader.

What to do if your GoPro won't erase the card

If the camera shows an error message during erase, the SD card may be corrupted or incompatible. Power off the GoPro, remove the card, and insert it into a computer. Try erasing it there using the file manager. If the computer also cannot read the card, the card itself may be failing.

Try a different SD card in your GoPro to confirm the camera works. If the new card erases without problems, your original card is likely damaged and should be replaced. If the new card also fails to erase, contact GoPro support — your camera may need service.

GoPro recommends using SanDisk Extreme, Kingston Canvas Go, or Lexar 1000x cards. Off-brand or very old cards sometimes cause erase failures even if they worked for recording.

Protecting files before you erase

Before you erase your card, make sure you have copied any files you want to keep. Connect your GoPro to your computer using a USB cable or remove the SD card and use a card reader. Open your file manager and drag the DCIM folder (which holds all your videos and photos) to a folder on your computer or external hard drive. Wait for the copy to finish — this can take several minutes for a full card.

Once the copy is complete and you have verified the files are on your computer, you can safely erase the card on your GoPro. If you erase without backing up, the files are gone permanently and cannot be recovered.

Frequently Asked Questions

How long does it take to erase an SD card on a GoPro?

Most erases take two to five minutes depending on the card's storage capacity and how full it is. A 64 GB card that is completely full may take longer than a 32 GB card that is half full. The progress bar on your camera screen shows how much time remains.

Can I erase just one video or photo instead of the whole card?

Yes. In the camera menu, go to Preferences and select Delete Files (not Delete All). Use the arrow buttons to scroll through your files and press the shutter button to select the ones you want to remove. This is slower than erasing everything at once, but it lets you keep files you want to save.

What happens if I remove the SD card while it is erasing?

The card may become corrupted and your GoPro may not recognize it afterward. Always wait for the erase to finish and for the camera to return to the main menu before you remove the card. If you accidentally remove it during erase, insert it back into the camera and try erasing again.

Is it safe to erase the card on my computer instead of the camera?

It works, but it is not ideal. Your GoPro formats cards in a specific way, and erasing on a computer does not reformat the card to match. Over time this can slow down recording or cause errors. If you erase on a computer, run the on-camera erase afterward to reformat the card properly.

Do I need to format the card before I use a new GoPro?

Yes. If you move an SD card from one GoPro to another, erase it on the new camera first. This ensures the card is formatted correctly for that specific model and prevents compatibility issues.