Factory Reset Wipes All Settings and Footage
A factory reset returns your GoPro to the state it left the factory—all custom settings vanish, all video and photos stored on the camera are deleted, and the software reverts to its original version. You cannot undo a factory reset once it starts, so back up any footage you want to keep before you begin.
Factory resets solve persistent problems: the camera freezes during recording, won't connect to the app, displays error messages, or behaves unpredictably after a software update. If your GoPro works normally but you straightforward want to clear old files, use the delete or format option instead—those preserve your current settings.
Key Takeaways
- A factory reset deletes all video, photos, and settings from your GoPro and cannot be reversed, so transfer your footage to a computer or phone before starting.
- The reset process differs between GoPro Hero 11, Hero 10, Hero 9, and older models, so check your camera's model number on the back before following steps.
- Most resets take 2 to 5 minutes and require you to navigate the camera's menu using the side buttons or touchscreen, depending on your model.
- After a factory reset, your GoPro will ask you to select language and time zone again, just as it did when new.
Factory Reset on GoPro Hero 11 and Hero 10
Press the Mode button (top left) to wake the camera if it is off. Tap the Settings icon (wrench symbol) on the touchscreen, then scroll down and tap Reset. Tap Reset Camera, then tap Yes when the confirmation message appears. The camera will display a progress bar and take 2 to 3 minutes to complete the reset.
Do not turn off the camera or remove the battery during the reset. When the screen goes black and then displays the language selection menu, the reset is finished. Your GoPro is now in the same state as when it first shipped.
Factory Reset on GoPro Hero 9 and Earlier Models
Power on the camera. Press the Mode button (top left) to enter the main menu. Use the side buttons to navigate to Preferences, then press the front shutter button to select it. Scroll down to Reset and press the shutter button again. Select Reset Camera and confirm by pressing the shutter button a third time.
The camera will show a progress bar for 3 to 5 minutes. The screen will go dark, then display the language menu. Do not interrupt the process by powering off or removing the battery. Once you see the language selection screen, the reset is complete.
What Happens After the Reset
Your GoPro will ask you to choose a language, then set the date and time. You can connect to the GoPro app and sign in to your account if you want cloud backup enabled. All your previous settings—video resolution, frame rate, color profile, microphone level—are gone and will return to factory defaults.
Insert a microSD card if you removed it before the reset. Format the card in the camera's menu (Settings > Format SD Card) to may support it works properly with your GoPro. The camera is now ready to record.
Backing Up Your Footage Before Reset
Connect your GoPro to a computer using the USB cable that came in the box. Open File Explorer (Windows) or Finder (Mac) and locate the GoPro drive. Copy the DCIM folder to a folder on your computer's hard drive. This folder holds all your video and photo files.
Alternatively, use the GoPro app on your phone. Open the app, tap the read icon, select the videos and photos you want to save, and choose Save to Photos (iPhone) or Save to Gallery (Android). This method is slower for large amounts of footage but works without a computer.
Common Mistakes That Cause Problems
Removing the battery or turning off the camera during a reset will corrupt the camera's software and may require a firmware reinstall. Let the reset run to completion even if it seems to take longer than expected.
Forgetting to back up footage is the most common regret. Once the reset finishes, all files are permanently gone. If you realize too late that you needed a video, data recovery software cannot retrieve files from a GoPro's internal storage.
Using a damaged or incompatible microSD card after the reset can cause the camera to freeze or fail to record. Always format a new card in the camera itself rather than on a computer.
When to Reset Versus When to Format
Use Format SD Card (in Settings) if you only want to delete video and photos but keep your current settings. This takes 30 seconds and is reversible with data recovery software if you change your mind when ready.
Use a factory reset only if the camera is malfunctioning or you want to erase all traces of your settings and footage. A reset is the nuclear option—it solves deep software problems but destroys everything on the camera.
Frequently Asked Questions
Can I factory reset my GoPro without a computer?
Yes. All factory resets happen on the camera itself using the touchscreen or buttons. You do not need a computer to perform the reset, but you should use a computer or phone to back up your footage first.
Will factory reset remove the GoPro app from my phone?
No. The reset only affects the camera. Your phone and the GoPro app are separate devices. You will need to reconnect the camera to the app after the reset and sign in again.
How long does a factory reset take?
Most resets take 2 to 5 minutes depending on your GoPro model and how much data is stored on it. Larger amounts of footage may take slightly longer to erase. Do not interrupt the process.
What if my GoPro is frozen and I cannot access the menu?
Hold the power button for 10 seconds to force a shutdown. Wait 30 seconds, then power it back on and try the reset again. If the camera still will not respond, remove the battery for 2 minutes, reinsert it, and try once more.
Do I need to update the firmware after a factory reset?
Your GoPro will keep the firmware version it had before the reset. You do not need to update unless you want new features or bug fixes. Check the GoPro website for your model to see if a newer version is available.