Factory Reset Your GoPro 3 in Three Steps
A factory reset on your GoPro 3 wipes all your settings, footage, and files back to the original state the camera shipped in. You do this through the camera's menu system — no computer or special software needed. The process takes about two minutes and is useful when the camera freezes, won't connect to WiFi, or you're selling it and want to clear your data.
The reset happens entirely on the camera itself. You navigate to Settings, find the Reset option, and confirm. Your memory card stays intact, but all video and photos on the camera's internal storage are deleted, so copy anything you want to keep before you start.
Key Takeaways
- Access the factory reset through the camera menu by pressing the back button, scrolling to Settings, and selecting Reset.
- A factory reset clears all footage, photos, and custom settings but does not erase files on your memory card.
- Copy any video or photos you want to keep to a computer or external drive before you reset, because internal storage will be wiped.
- The reset takes about two minutes and requires a charged battery — do not power off the camera during the process.
Accessing the Settings Menu
Turn on your GoPro 3 and wait for the home screen to appear. Press the back button (the small button on the back of the camera, below the screen) once. This opens the main menu.
Use the up and down arrow buttons on the side of the camera to scroll through the menu options. You will see options like Video, Photo, Playback, and Settings. Scroll down until you reach Settings and press the front button (the one on the front of the camera) to enter it.
Finding and Selecting Reset
Inside the Settings menu, scroll down through the options using the arrow buttons. You will see choices like Video Resolution, Frame Rate, Field of View, and others. Keep scrolling until you see Reset near the bottom of the list.
Press the front button to select Reset. The camera will ask you to confirm — a message will appear asking if you want to reset to factory defaults. Press the front button again to confirm. Do not press the back button, which cancels the action.
What Happens During and After the Reset
Once you confirm, the camera will process the reset. You will see a loading screen or progress indicator. This usually takes 30 seconds to two minutes. Leave the camera on and do not remove the battery or memory card during this time.
When the reset finishes, the camera will restart and show the home screen again. All your custom settings are now back to factory defaults — video resolution, frame rate, WiFi settings, and any other adjustments you made are gone. The camera is ready to use, and you can set it up again from scratch if you want different settings.
Protecting Your Files Before You Reset
Before you reset, connect your GoPro 3 to a computer using the USB cable that came with it. The camera will appear as a removable drive on your computer. Open it and look for the DCIM folder, which holds all your video and photo files.
Copy the entire DCIM folder to a folder on your computer desktop or in your Documents. This backs up everything stored on the camera's internal memory. Once the copy is complete and you have verified the files are on your computer, you can safely reset the camera without losing your footage.
If you have a memory card inserted in the camera, files on that card are not affected by a factory reset. However, it is still good practice to back up important footage to a computer as a second copy, since memory cards can fail.
When a Factory Reset Does Not Fix the Problem
If your GoPro 3 still freezes, won't turn on, or behaves strangely after a factory reset, the issue may be a corrupted memory card, a drained battery, or a hardware problem. Try charging the battery fully for at least four hours, then power on the camera without the memory card inserted. If it works without the card, the card itself may be the problem.
If the camera still does not respond after a full charge and a factory reset, and you have tried it without a memory card, the camera may have a hardware fault. At that point, repair or replacement through GoPro's support channel is the next step, though the GoPro 3 is an older model and parts may be hard to find.
Frequently Asked Questions
Will a factory reset delete my videos and photos?
Yes, a factory reset deletes all footage and photos stored on the camera's internal memory. Files on a memory card are not affected. Always back up your videos and photos to a computer before you reset.
Do I need a computer to factory reset my GoPro 3?
No. The reset happens entirely on the camera through the menu system. You only need a computer if you want to back up your files first.
How long does a factory reset take?
The reset process usually takes 30 seconds to two minutes. Keep the camera powered on and do not remove the battery or memory card while it is running.
What if I forget my WiFi password after a factory reset?
A factory reset clears all WiFi settings, so you will need to re-enter your WiFi password when you reconnect. The password itself does not change — only the camera's memory of it is erased.
Can I stop a factory reset once it starts?
Once you confirm the reset, the process runs to completion. Do not power off the camera or remove the battery during the reset, as this can corrupt the camera's system files.